Technique for physical simulation of gasodynamic processes in the turbomachine flow passages

In this paper, a technique for the refined determination of turbine stage model parameters to investigate gasodynamic processes in the turbine flow passages without regard to uncontrolled heat exchange with environment is suggested.     

Radial equalization of turbine gas temperature

Based on the results of the gas temperature measurements in the turbine flow passage of a number of full-scale GTEs and GTPs, we obtained the magnitudes of coefficients that make it possible to refine with respect to radius the temperature profile at the blading inlet in the gasodynamic calculations.     

A concept of increasing efficiency for ramjet operation

The vortical mixing concept in the ramjet channel is analyzed. The results of simulating the gasodynamic scheme permit the concept of increasing efficiency for ramjet operation to be substantiated.     

Numerical simulation of nonstationary gasodynamic processes in a pulsejet engine

A method of numerical simulation of nonstationary gasodynamic processes in a pulsejet engine is proposed. The method makes it possible to provide a rather high precision for computational grids both with small and large cells. The calculation results showed a good agreement with the experimental data.     

A method for representing the thermodynamic and thermophysical functions in simulation of powerplant processes

A method for representing thermodynamic and thermophysical functions is presented; the functions make it possible to simulate thermal and gasodynamic processes in powerplants that use different individual substances or their mixtures as a working fluid. The method also involves consideration of real gas properties.     

Gasodynamic igniter with an annular nozzle

The results of numerical simulation of a flow in the complex-shaped channels and experimental investigation of characteristics of a gasodynamic igniter equipped with a plug nozzle are presented. It is shown that the igniter characteristics are significantly improved as a result of replacing an acoustic nozzle by an annular one.     

Simulation of the test stand gas-liquid ejector operation

Based on the data of numerical simulation of the test stand gas-liquid ejector operation, the fields of gasodynamic flow parameters in the gas flue channel are determined. The test stand operation in real time and processes of interaction between the flow of combustion products and neutralizing liquid are also analyzed.     

Study of working process instability in the two-chamber solid-propellant rocket engine

The mechanism of low-frequency acoustic instability generation in the two-chamber tandem solid-propellant rocket engine is studied numerically using the Davydov method (the method of large particles). The calculation results are in a good agreement with the experimental data. The gasodynamic nature (that is essentially nonlinear) of low-frequency acoustic fluctuations of pressure and thrust connected with the structure and pattern of the flow in the rocket engine combustion chamber is corroborated.     

Choice of optimal parameters of a gasodynamic temperature stratification process in the supersonic gas flow

The results of design analysis of the different factor influence on the gasodynamic temperature flow stratification efficiency in the Leont’ev tube are presented. It is justified that the temperature stratification efficiency can be increased at the expense of using longitudinal ribs on the heat exchange surface in the subsonic flow path, and the parameters determining the process can be optimized.     

Experimental and theoretical investigation of laser rocket engine characteristics based on a continuous optical discharge

The results of the experimental and theoretical investigation of basic laser rocket engine (LRE) characteristics are presented; the engine operation is based on a continuous optical discharge being stabilized in the absorption chamber by a swirled counterflow working gas stream. Modeling of the stream pattern in the LRE absorption chamber made it possible to reveal zones of peripheral, intermediate and axial flow taking into account atmospheric air ejection into the near-axial region through the gasodynamic window. It is shown that creation of a laser rocket engine with a high specific impulse is a real problem.     

Gasodynamic characteristics of a combustion chamber in the integrated power plant with an asymmetric air intake

The results of experimental investigations of gasodynamic characteristics of a combustion chamber model in the integrated power plant (IPP) with an asymmetric air intake are presented. The influence of an angle of air supply into the chamber model on hydraulic losses and the flow structure is shown at different air flowrates, relative values of the minimal flow section area of the feeding air intake pipes, under changes of the flowrate of gas simulating gas generation products and geometric model parameters. A technique for measuring the concentration of carbon dioxide simulating IPP gas generation products in the combustion chamber air flow and the results of experimental investigations of a mixture formation process in the combustion chamber model are described.     

考虑复合材料蒙皮稳定性的飞机翼面结构布局优化设计

 复合材料蒙皮稳定性是飞机翼面结构设计需要考虑的重要方面。由于翼面结构稳定性理论分析的复杂性,工程中,通常采用与理论分析相比拟的简化方法、使用简便可靠的经验公式在设计过程中进行稳定性校核。多墙式结构是当前翼面结构中普遍采用的结构形式,墙的布局和蒙皮的厚度对复合材料蒙皮的临界屈曲载荷有着重要影响。因此,针对多墙式翼面结构,以工程经验公式为基础,以蒙皮单位长度上的的重量为优化目标,以墙的布局参数和蒙皮厚度为设计变量,以临界失稳载荷为约束,建立了一种考虑复合材料蒙皮稳定性的翼面结构布局优化问题的数学模型,导出了目标函数敏度计算的解析式,并提出了优化问题的求解方法。以翼盒结构为例,验证了该方法的有效性。     

InvesInvestigation of the Effects of Airfoil-probes on the Aerodynamic Performance of an Axial Compressor

In order to investigate the effects of the airfoil-probes on the aerodynamic performance of an axial compressor,a numerical simulation of 3D flow field is performed in a 1.5-stage axial compressor with airfoil-probes installed at the stator leading-edge(LE).The airfoil-probes have a negative influence on the compressor aerodynamic performance at all operating points.A streamwise vortex is induced by the airfoil-probe along both sides of the blade.At the mid-operating point,the vortex is notable along the pressure side and is relatively small along the suction side(SS).At the near-stall point,the vortex is slightly suppressed in the pressure surface(PS),but becomes remarkable in the suction side.A small local-separation is induced by the interactions between the vortex and the end-wall boundary layer in the corner region near the hub.That the positive pitch angle of the airfoil-probe at 6.5% span is about 15° plays an important role in the vortex evolution near the hub,which causes the fact that the airfoil-probe near the hub has the largest effects among the four airfoil-probes.In order to get a further understanding of the vortex evolution in the stator in the numerical simulation,a flow visualization experiment in a water tunnel is performed.The flow visualization results give a deep insight into the evolution of the vortex induced by the airfoil-probe.     

水润滑轴承微观界面流场特性的数值模拟

为了研究水润滑高分子材料轴承的微观界面的流场特性,本文以单个微凹体中的流场作为研究对象,建立了单个微凹体流动模型。采用多松弛格子玻尔兹曼方法MRT-LBM (multi-relaxation time lattice Boltzmann method)对单个微凹体的流体流动问题进行数值模拟。研究了流场中速度的变化规律,以及流场中流线分布随雷诺数的变化规律。结果表明当雷诺数较低时,流场处于稳定性流动状态;当雷诺数达到一定程度时,流场处于周期流动状态;当雷诺数很高时,流场处于湍流运动状态。探究微观流场中复杂的变化规律,为研究水润滑高分子材料轴承的润滑和摩擦性能提供一些理论支撑。     

应答机测距转发性能分析

分析了采用视频AGC（自动增益控制）、射频AGC和限幅器等3种测距转发模式的应答机性能,分析结果表明：视频AGC模式下,应答机测距通道的输出功率恒定,测距转发性能不随上行信号强度变化而变化;射频AGC模式下,应答机测距通道的输出功率不恒定,测距转发性能随着上行信号强度变化而变化;而限幅器模式可看作射频AGC的一种特殊情况。仿真分析了我国研制的限幅器和射频AGC两种模式应答机的性能,结果表明理论计算的性能与实测结果一致,理论分析正确且理论分析结果可作为链路计算的依据。     

飞船返回舱红外跟踪

提出一种联合大底检测的改进的Mean-Shift（均值移位）算法,将其应用于返回舱红外跟踪。新算法采用非均匀量化加权直方图构造目标特征矢量,以提高目标描述的准确性。为避免跟踪到大底上去,使用＂滑窗式＂大底检测算法实时修正Mean-Shift跟踪坐标。通过对飞船返回实况判读验证,提出的新算法处理速度达到20帧/s以上,并且能够可靠和准确地跟踪返回舱。     

雷击建筑物时防雷系统中雷电流的分布研究

主要讨论雷直击建筑物时雷电流在防雷系统中的分布特性，介绍利用计算机进行数值计算的方法。通过典型算例、传统的电磁暂态计算程序——EMTP的计算结果和利用清华大学高压实验室的冲击大电流发生装置，对此结构模型进行模拟试验，将3种结果进行比较，从而验证了本研究所编制的计算机程序的正确性。为进一步研究室内电磁场的暂态分析做好基础。     

三个素数猜想的证明

采用新的构造方法,把不规则分布的素数进行分类,即把单个素数a都同时表示成等距的区间[a,a＋h]（a为任意素数）,在[a,a＋h]中的元素为自然数,将[a,a＋h]中对应位置有相同情况,或都是素数,或都不是素数的为同一等价类,其中每个[a,a＋h]中至少有一个素数a,h取不同自然数时,分类方法不同,显然[a,a＋h]的等价类的个数在h有限时是有限的,小于2h/2。     

BT16钛合金渗氢压缩试样中的剪切带

为了深入了解渗氢及变形速率对BT16钛合金冷镦性能的影响,采用光学显微镜(OM)和显微硬度的方法,研究了BT16钛合金渗氢压缩试样中的剪切带.结果表明:在300 mm/s的压缩速率下,中心区变形流线与剪切带保持平行;在75 mm/s的压缩速率下,剪切带中心区与剪切变形过渡区边界模糊,变形流线与剪切带呈一定的小角度.在300 mm/s的压缩速率下形成的剪切带中心区显微硬度值近似为常数,且低于基体硬度值,剪切带中心区与基体之间存在一个硬度值线性增加的过渡区.对剪切带形成过程进行了分析,提出了利用变形流线计算剪切带最大应变的方法.     

Analysis of Theories of Fully Ionized Space Plasma

The physical sense of the main ideas, presently used in plasma physics, is discussed. An attempt is made to clarify the concepts, used in plasma physical calculations. The concept of `Coulomb collisions' with the implicitly introduced rapid stochastization plays the main negative role in the physics of fully ionized plasma. Statistical methods, which are adequate for the neutral gas and for the partially ionized plasma, are not applicable for the completely ionized case. It is the cause of large errors in evaluating real plasma parameters. A new concept is considered: a fully ionized space plasma should be treated as a dynamical system with a low level of chaos. Further progress in space physics requires a serious renewal of plasma theory.