Estimation of vertically integrated water vapor in Hungary using MODIS imagery

Information about the amount and spatial structure of atmospheric water vapor is essential in understanding meteorology and the Earth environment. Space-borne remote sensing offers a relatively inexpensive method to estimate atmospheric water vapor in the form of integrated water vapor (IWV). The research activity reported in the present paper is based on the data acquired by the HRPT/MODIS (High Resolution Picture Transmission, MODerate resolution Imaging Spectroradiometer) receiving station established in Budapest (Hungary) by the Space Research Group of the Eötvös Loránd University. Integrated water vapor is estimated by the remotely sensed data of the MODIS instrument with different methods and also by the operational numerical weather prediction model of the European Centre for Medium-Range Weather Forecasts (ECMWF). Radiosonde data are used to evaluate the accuracy of the different IWV fields though it has been pointed out that the in situ data also suffers from uncertainties. It was found that both the MODIS and the ECMWF based fields are of good accuracy. The satellite data represent finer scale spatial structures while the ECMWF data have a relatively poor spatial resolution. The high quality IWV fields have proved to be useful for radiative transfer studies such as the atmospheric correction of other satellite data from times different than the overpass times of satellites Terra/Aqua and the forecast times of the model data. For this purpose the temporal variability of IWV is scrutinized both using ECMWF and MODIS data. Taking advantage of Terra and Aqua overpasses, the mean rate of change of IWV estimated by the near infrared method was found to be 0.47 ± 0.45 kg m⁻² h⁻¹, while it was 0.13 ± 0.65 kg m⁻² h⁻¹ based on the infrared method. The numerical weather prediction model’s analysis data estimated −0.01 ± 0.13 kg m⁻² h⁻¹ for the mean growth rate, while using forecast data it was 0.24 ± 0.18 kg m⁻² h⁻¹. MODIS data should be used when available for the estimation of the IWV in other studies. If no satellite data are available, or available data are only from one overpass, ECMWF based IWV can be used. In this case the analysis fields (or the satellite field) should be used for temporal extrapolation but the rate of change should be calculated from the forecast data due to its higher temporal resolution.     

Application of space sciences to hydrology and water resources: The potential and practical use as reflected by WMO experience

Observations from spacecraft have already proved their worth in a number of fields and much work has been undertaken to develop their use in studies of hydrology and water resources. The ability to obtain areal estimates of parameters over large areas as opposed to only point values and the inherent computer-compatibility of the data obtained are only two of the many advantages which may be stressed. However, any new technology requires the expenditure of scarce financial resources, not only on the system itself but also on associated activities. A full use of space observations in hydrology and water resources will require major changes in existing data collection, storage and processing systems. The net benefits to be gained from such changes must first be demonstrated to those responsible for these systems. A dialogue should therefore be established between those supplying the data and investigating their potential uses, and those actually engaged in the assessment and management of water resources. Examples are offered of projects in which space observations are being used and information is given on requirements for work in hydrology and water resources for data acquired by space observation.     

First-order feasibility analysis of a space suit radiator concept based on estimation of water mass sublimation using Apollo mission data

Thermal control of a space suit during extravehicular activity (EVA) is typically accomplished by sublimating water to provide system cooling. Spacecraft, on the other hand, primarily rely on radiators to dissipate heat. Integrating a radiator into a space suit has been proposed as an alternative design that does not require mass consumption for heat transfer. While providing cooling without water loss offers potential benefits for EVA application, it is not currently practical to rely on a directional, fixed-emissivity radiator to maintain thermal equilibrium of a spacesuit where the radiator orientation, environmental temperature, and crew member metabolic heat load fluctuate unpredictably. One approach that might make this feasible, however, is the use of electrochromic devices that are capable of infrared emissivity modulation and can be actively controlled across the entire suit surface to regulate net heat flux for the system. Integrating these devices onto the irregular, compliant space suit material requires that they be fabricated on a flexible substrate, such as Kapton film. An initial assessment of whether or not this candidate technology presents a feasible design option was conducted by first characterizing the mass of water loss from sublimation that could theoretically be saved if an electrochromic suit radiator was employed for thermal control. This is particularly important for lunar surface exploration, where the expense of transporting water from Earth is excessive, but the technology is potentially beneficial for other space missions as well. In order to define a baseline for this analysis by comparison to actual data, historical documents from the Apollo missions were mined for comprehensive, detailed metabolic data from each lunar surface outing, and related data from NASA’s more recent “Advanced Lunar Walkback” tests were also analyzed. This metabolic database was then used to validate estimates for sublimator water consumption during surface EVAs, and solar elevation angles were added to predict the performance of an electrochromic space suit radiator under Apollo conditions. Then, using these actual data sets, the hypothetical water mass savings that would be expected had this technology been employed were calculated. The results indicate that electrochromic suit radiators would have reduced sublimator water consumption by 69.0% across the entire Apollo program, for a total mass savings of 68.5 kg to the lunar surface. Further analysis is needed to determine the net impact as a function of the complete system, taking into account both suit components and consumable mass, but the water mass reduction found in this study suggests a favorable system trade is likely.     

Application of China–Brazil Earth resources satellite in China

The launch and successful operation of Chinese–Brazil Earth resources satellite (CBERS-1) in China has accelerated the application of space technology in China. These applications include agriculture, forestry, water conservation, land resources, city planning, environment protection and natural hazards monitoring and so on. The result of these applications provides a scientific basis for government decision making and has created great economic and social benefits in Chinese national economy construction. In this paper we present examples and provide auxiliary documentation of additional applications of the data from Earth resource monitoring.     

Validation on MERSI/FY-3A precipitable water vapor product

The precipitable water vapor is one of the most active gases in the atmosphere which strongly affects the climate. China's second-generation polar orbit meteorological satellite FY-3A equipped with a Medium Resolution Spectral Imager (MERSI) is able to detect atmospheric water vapor. In this paper, water vapor data from AERONET, radiosonde and MODIS were used to validate the accuracy of the MERSI water vapor product in the different seasons and climatic regions of East Asia. The results show that the values of MERSI water vapor product are relatively lower than that of the other instruments and its accuracy is generally lower. The mean bias (MB) was ?0.8 to ?12.7?mm, the root mean square error (RMSE) was 2.2–17.0?mm, and the mean absolute percentage error (MAPE) varied from 31.8% to 44.1%. On the spatial variation, the accuracy of MERSI water vapor product in a descending order was from North China, West China, Japan -Korea, East China, to South China, while the seasonal variation of accuracy was the best for winter, followed by spring, then in autumn and the lowest in summer. It was found that the errors of MERSI water vapor product was mainly due to the low accuracy of radiation calibration of the MERSI absorption channel, along with the inaccurate look-up table of apparent reflectance and water vapor within the water vapor retrieved algorithm. In addition, the surface reflectance, the mixed pixels of image cloud, the humidity and temperature of atmospheric vertical profile and the haze were also found to have affected the accuracy of MERSI water vapor product.     

Injuries to plants from controlled environment contaminants.

The use of controlled environments is subject to problems from contaminants emitted from materials of the system and from plants. Many contaminants are difficult to identify because injurious dosages are very low, there is a lack of information on what compounds injure plants, because species and cultivars differ greatly in their sensitivity to injury and injury symptoms often are not distinctive. Plastics have been shown to emit many different volatile compounds. The compound, di-butyl phthalate, contained in certain flexible plastics, has been shown to be very toxic to plants. Other injuries have been produced by caulking compounds and bonded screening. Paints have been shown to release xylene that is toxic to plants. Steam for humidification can cause problems because of hydroxylamines and other compounds added to steam used for heating to control fungal growth in return lines. Mercury, from broken thermometers is a particular problem in growth chambers because small quantities can collect in cracks and slowly volatilize to slow growth of plants. Plants themselves release large quantities of volatile hydrocarbons, with ethylene being the commonly recognized chemical that can be damaging when allowed to accumulate. People release large quantities of carbon dioxide which can cause variations in the rate of growth of plants. Contaminant problems can be controlled through filtering of the air or ventilation with make-up air, however the potential for problems is always present and careful testing should be undertaken with the particular species and cultivars being grown insure that there are no toxic agents altering growth in each particular controlled environment being utilized.     

Analysis of precipitable water vapor from GPS measurements in Chengdu region: Distribution and evolution characteristics in autumn

The rainfall process of Chengdu region in autumn has obvious regional features. Especially, the night-time rain rate of this region in this season is very high in China. Studying the spatial distribution and temporal variation of regional atmospheric precipitable water vapor (PWV) is important for our understanding of water vapor related processes, such as rainfall, evaporation, convective activity, among others in this area. Since GPS detection technology has the unique characteristics, such as all-weather, high accuracy, high spatial and temporal resolution as well as low cost, tracking and monitoring techniques on water vapor has achieved rapid developments in recent years. With GPS–PWV data at 30-min interval gathered from six GPS observational stations in Chengdu region in two autumns (September 2007–December 2007 and September 2008–December 2008), it is revealed that negative correlations exist between seasonally averaged value of GPS–PWV as well as its variation amplitude and local terrain altitude. The variation of PWV in the upper atmosphere of this region results from the water vapor variation from surface to 850 hPa. With the help of Fast Fourier Transform (FFT), it is found that the autumn PWV in Chengdu region has a multi-scale feature, which includes a seasonal cycle, 22.5 days period (quasi-tri-weekly oscillation). The variation of the GPS–PWV is related to periodical change in the transmitting of the water vapor caused by zonal and meridional wind strengths’ change and to the East Asian monsoon system. According to seasonal variation characteristics, we concluded that the middle October is the critical turning point in PWV content. On a shorter time scale, the relationship between autumn PWV and ground meteorological elements was obtained using the composite analysis approach.     

Radiometric estimation of water vapor content over Brazil

A multi-channel microwave radiometre (make: Radiometrics Corporation) is installed at Instituto Nacional de Pesquisas Espaciais–INPE, Brazil (22°S). The radiometric output of two channels of the radiometer in the form of brightness temperature at 23.834 GHz and 30 GHz, initially, were used to find out the ambient water vapor content and the non-precipitable cloud liquid water content. The necessary algorithm was developed for the purpose. The best results were obtained using the hinge frequency 23.834 GHz and 30 GHz pair having an r.m.s. error of only 2.64. The same methodology was then adopted exploiting 23.034 GHz and 30 GHz pair. In that case the r.m.s. error was 3.42. These results were then compared with those obtained over Kolkata (22°N), India, by using 22.234 GHz and 31.4 GHz radiometric data. This work conclusively suggests the use of a frequency should not be at the water vapor resonance line. Instead, while measuring the vapor content for separation of vapor and cloud liquid, one of them should be a few GHz left or right from the resonance line i.e., at 23.834 GHz and the other one should be around 30 GHz.     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

GRACE products and land surface models for estimating the changes in key water storage components in the Nile River Basin

The Nile River Basin (NRB) is facing extreme demand for its water resources due to an alarming increase in population and the changing climate. The NRB is not compatible with ground-based in-situ observations owing to its large basin area size and limited hydrological data access from basin countries. Thus, it lends itself to remotely sensed approaches with high spatial resolution and extended temporal coverage. The Gravity Recovery and Climate Experiment (GRACE) avails a unique opportunity to investigate the changes in key components of terrestrial water storage (TWS). GRACE TWS solutions have specific tuning parameters and processing strategies that result in regionally specific variations and error patterns. We explored the TWS time series spatiotemporal changes, trends, uncertainties, and signal-to-noise ratio among different GRACE TWS data. We had also investigated the key terrestrial water storage components such as surface water, soil moisture, and groundwater storage changes. The results show that GRACE spherical harmonic solutions' uncertainty is higher than the mass concentration (mascon) over the NRB, and the Center for Space Research-mascons had the best performance. The evapotranspiration correlation (R² = 0.85) has the highest correlation with GRACE’s TWS, whereas the normalized difference vegetation index (R² = 0.82) has the second highest correlation. Notably, significant long-term (2003–2017) negative groundwater and soil moisture trends demonstrate a potential depletion of the NRB. Despite an increase in precipitation and the TWS time series, the rate of decline increased rapidly after 2008, thereby indicating the possibility of human-induced change (e.g. for irrigation purposes). Therefore, the results of this study provide a guide for future studies related to hydro-climatic change over the NRB and similar basins.     

Global monitoring of tropospheric water vapor with GPS radio occultation aboard CHAMP

The global positioning system radio occultation (GPS RO) technique provides a powerful tool for atmospheric sounding which requires no calibration, is not affected by clouds, aerosols or precipitation, and provides an almost uniform global coverage. The paper deals with application of GPS RO measurements from CHAllenging Minisatellite Payload (CHAMP) for the retrieval of tropospheric water vapor profiles. CHAMP RO data are available since 2001 with up to 200 high resolution atmospheric profiles per day. We introduce a new direct method for water vapor retrieval from GPS RO data. Additionally, a 1Dvar algorithm is used for this purpose. The so derived CHAMP water vapor profiles are validated with radiosonde data on a global scale. Here, both methods come to statistically comparable results revealing a negative bias of less than 0.1 g/kg and a standard deviation of less than 1 g/kg specific humidity in the mid troposphere. Potentials of CHAMP RO retrievals for monitoring the mean tropospheric water vapor distribution on a global scale are presented.     

微型镓场发射电推力器的推力和比冲测量

电推进技术的发展推动了微推力测量技术和比冲测量技术的研究进程。为了评估已研制出的微型镓场发射电推力器的性能,进行了推力和比冲测量。研制了一种用于场发射电推力器的微推力测量平台;进行了LabVIEW开发;对测量平台进行了标定与分析,并通过试验比较了推力实测值与理论值,实测值范围为3~28μN。另外,利用飞行时间法,测得推力器在不同发射电流下的比冲数据,比冲范围为5917~8875s。     

某型飞机水上迫降数值化模型

近海/跨海使用的飞机必须考核水上迫降性能,而目前飞机抗坠毁标准、设计方法和分析方法通常只考虑硬着陆情况,很少考虑水面迫降情况,这是由于水上迫降涉及多场耦合,问题十分复杂.为了简化问题,采用了解耦的方法,将仿真与试验相结合,利用MSC.PATRAN/DYTRAN软件平台,建立全机有限元模型,包括全尺寸机身、机翼和尾翼结构,并导入具体参数,对13种工况条件进行了动力学数值仿真计算.预测了飞机撞击水面过程中结构的瞬态应力分布,对飞机机身下部蒙皮进行了强度分析,表明飞机在着水过程中蒙皮不会发生损坏.      

Remote sensing techniques for monitoring and managing irrigated lands

Agriculture in semi-arid tracts of the world depends on water to sustain its irrigation systems. Such agricultural systems either derive from government investments in the control of surface flow or they have been developed through the exploitation of groundwater sometimes by a large community of unsupervised individuals seeking to maximise their own advantage without concern for the resource upon which they depend in the medium and long term. In both cases government agencies need data on the area irrigated and the volume of water used. In countries with highly developed scientific and agricultural institutions the contribution of remote sensing, though significant, may only provide between five and ten per cent of the data required to guide regional and national managers. In countries without such institutions the proportion contributed by remote sensing can be very much higher, as shown in a recent study in North Africa. The paper will emphasise the importance of carefully structured sampling procedures, both to improve the areal estimates from satellite imagery and the estimates of water use based upon them. The role of satellite imagery in providing information on the status of water resources, on trends in water use and in the implementation of policies to extend or diminish irrigated land are discussed.     

Tomographic determination of the spatial distribution of water vapor using GPS observations

With the advent of the GPS navigation system, a promising ground based technique has been introduced which makes it possible to estimate the amount of water vapor in the troposphere from operational GPS networks at relatively low additional costs. While the estimation of the integrated amount is currently well established, the determination of the spatial water vapor distribution and its temporal variation are still a major challenge. To account for the vertical resolution, several tomographic approaches were pursued. We developed the software package AWATOS (atmospheric water vapor tomography software) which is based on the assimilation of double differenced GPS observations. Applying a least-squares inversion, the inhomogeneous spatial distribution of water vapor is determined. An extensive investigation has been carried out in Switzerland. GPS measurements are performed by the dense permanent Swiss national GPS network AGNES of the Swiss Federal Office of Topography (swisstopo). A total of 40 equally distributed water vapor profiles have been estimated on an hourly basis. For the purpose of validation, 22 radiosonde profiles were used at the GPS and meteorological station Payerne. Furthermore, data of the numerical weather model aLMo (alpine model in Switzerland, MeteoSwiss) were compared with the tomographic results. An overall good agreement of the three methods with an rms of better than 1.6 g/m³ absolute humidity was achieved. The results show that AGNES can be used as a dedicated network for the purpose of GPS-tomography, using a horizontal resolution of approximately 50 km and height layers of 300–500 m thickness in the lower troposphere.     

Regional gravity field model in Pakistan area from the combination of CHAMP,GRACE and ground data using least squares collocation: A case study

This study describes a methodology of recovery of the Earth’s gravity field from CHAMP and GRACE satellites data in Pakistan using least squares collocation (LSC) based downward continuation technique. The CHAMP height anomalies and GRACE gravity disturbances derived from the observed satellite data have been used in combination solution using LSC with observed gravity values at the Earth surface. The combined covariance functions of height anomalies and/or gravity disturbances at satellite altitudes and observed gravity anomalies at Earth surface have been used as the basis for combination and downward continuation solution. The variance of predicted gravity anomalies from GRACE gravity disturbances is relatively lower than the corresponding results of gravity anomalies from CHAMP height anomalies. This fact may be attributed partly to the amplification of noise and partly to the unstable inverse transformation process of height anomalies to gravity anomalies. The impact of data error variance has been studied in the context of smoothing and noise reduction in the final solution of downward continuation using least squares collocation. The raising of data error suppresses the noise and as a result a smooth final solution is obtained. The prediction results appear to be dependent on the quality of data and goodness of combined covariance function, which are fairly comparable for the CHAMP and GRACE data. The recovered gravity field from satellite data appears to contribute mainly to medium and long wavelength parts of total gravity field spectrum. Due to flexibility of data handling in least squares collocation, this procedure is applicable to any observable of gravity field being at different altitudes and with different data spacing.     

Evolution of the Martian water cycle.

The current Martian water cycle is extremely asymmetric, with large amounts of vapor subliming off a permanent north polar water ice cap in northern summer, but with no apparent major source of water vapor in the southern hemisphere. Detailed simulations of this process with a three-dimensional circulation model indicate that the summertime interhemispheric exchange (Hadley cell) is very much stronger than transport by eddies in other seasons. As a result, water ice would be distributed globally were it not for the buffering action of regolith soil adsorption which limits the net flux of water vapor off the north polar cap to amounts that are insignificant even on the scale of thousands of years. It has been suggested that the polar layered deposits are the result of exchange on these long time scales, driven by changes in Martian orbital parameters. We therefore are conducting simulations to test the effect of varied orbital parameters on the Martian water cycle. We find that when the perihelion summer pole is charged with a polar water ice cap, large quantities of water are quickly transfered to the aphelion summer pole, setting up an annual cycle that resembles the present one. Thus, the adsorptivity of the Martian regolith may be in the narrow range where it can limit net transport from the aphelion but not the perihelion pole.     

The water cycle in closed ecological systems: Perspectives from the Biosphere 2 and Laboratory Biosphere systems

To achieve sustainable, healthy closed ecological systems requires solutions to challenges of closing the water cycle – recycling wastewater/irrigation water/soil medium leachate and evaporated water and supplying water of required quality as needed for different needs within the facility. Engineering Biosphere 2, the first multi-biome closed ecological system within a total airtight footprint of 12,700 m² with a combined volume of 200,000 m³ with a total water capacity of some 6 × 10⁶ L of water was especially challenging because it included human inhabitants, their agricultural and technical systems, as well as five analogue ecosystems ranging from rainforest to desert, freshwater ecologies to saltwater systems like mangrove and mini-ocean coral reef ecosystems. By contrast, the Laboratory Biosphere – a small (40 m³ volume) soil-based plant growth facility with a footprint of 15 m² – is a very simplified system, but with similar challenges re salinity management and provision of water quality suitable for plant growth. In Biosphere 2, water needs included supplying potable water for people and domestic animals, irrigation water for a wide variety of food crops, and recycling and recovering soil nutrients from wastewater. In the wilderness biomes, providing adequately low salinity freshwater terrestrial ecosystems and maintaining appropriate salinity and pH in aquatic/marine ecosystems were challenges. The largest reservoirs in Biosphere 2 were the ocean/marsh with some 4 × 10⁶ L, soil with 1 to 2 × 10⁶ l, primary storage tank with 0 to 8 × 10⁵ L and storage tanks for condensate and soil leachate collection and mixing tanks with a capacity of 1.6 × 10⁵ L to supply irrigation for farm and wilderness ecosystems. Other reservoirs were far smaller – humidity in the atmosphere (2 × 10³ L), streams in the rainforest and savannah, and seasonal pools in the desert were orders of magnitude smaller (8 × 10⁴ L). Key technologies included condensation from humidity in the air handlers and from the glass space frame to produce high quality freshwater, wastewater treatment with constructed wetlands and desalination through reverse osmosis and flash evaporation were key to recycling water with appropriate quality throughout the Biosphere 2 facility. Wastewater from all human uses and the domestic animals in Biosphere 2 was treated and recycled through a series of constructed wetlands, which had hydraulic loading of 0.9–1.1 m³ day⁻¹ (240–290 gal d⁻¹). Plant production in the wetland treatment system produced 1210 kg dry weight of emergent and floating aquatic plant wetland which was used as fodder for the domestic animals while remaining nutrients/water was reused as part of the agricultural irrigation supply. There were pools of water with recycling times of days to weeks and others with far longer cycling times within Biosphere 2. By contrast, the Laboratory Biosphere with a total water reservoir of less than 500 L has far quicker cycling rapidity: for example, atmospheric residence time for water vapor was 5–20 min in the Laboratory Biosphere vs. 1–4 h in Biosphere 2, as compared with 9 days in the Earth’s biosphere. Just as in Biosphere 2, humidity in the Laboratory Biosphere amounts to a very small reservoir of water. The amount of water passing through the air in the course of a 12-h operational day is two orders of magnitude greater than the amount stored in the air. Thus, evaporation and condensation collection are vital parts of the recycle system just as in Biosphere 2. The water cycle and sustainable water recycling in closed ecological systems presents problems requiring further research – such as how to control buildup of salinity in materially closed ecosystems and effective ways to retain nutrients in optimal quantity and useable form for plant growth. These issues are common to all closed ecological systems of whatever size, including planet Earth’s biosphere and are relevant to a global environment facing increasing water shortages while maintaining water quality for human and ecosystem health. Modular biospheres offer a test bed where technical methods of resolving these problems can be tested for feasibility.