飞机管理系统1394总线AS5643协议的设计与实现

随着JSF项目首先在航空器中采用IEEE-1394b总线,使得该总线在航空电子系统中被快速广泛地使用。AS5643协议在IEEE-1394b总线协议的基础上通过增加限制的方法,满足了新一代飞机管理系统总线对于高带宽、高确定性和高可靠性的要求。分析了基于飞机管理系统总线的基本拓扑结构和AS5643协议,阐述了一种基于FPGA逻辑设计实现AS5643协议的解决方案。通过实验验证,表明设计解决方案满足设计指标,性能良好,实现了飞机管理系统总线机载环境的应用要求。     

An innovative commercial avionics architecture for militarytanker/transport platforms

Honeywell has implemented a versatile integrated avionics (VIA) architecture in several advanced commercial flight deck applications ensuring a military tie to future commercial upgrades related to global air traffic management functions. The VIA architecture can also be easily extended to meet unique military requirements of the advanced military flight decks for military tanker/transport upgrade programs. The subtle changes in the architecture are a result of unique equipment interfaces and unique military equipment such as communications radios, identification friend or foe, station keeping equipment and defensive systems which must be integrated within the architecture. The ability to integrate both commercial and military functions in the same high integrity computing platform truly offers the military the best of both worlds     

航空电子通信系统关键技术问题的浅析

现代航空电子综合化技术的发展大大提高了军用飞机的性能 ,信息综合化技术中最重要的技术之一就是航空电子通信技术。基于MIL -STD— 15 5 3B总线 ,本文分析了航空电子通信系统设计中若干关键性问题的解决途径。最后着重说明了某机载ACT飞控系统 15 5 3B总线通信网络的实现技术。     

Switched Ethernet testing for avionics applications

Switched Ethernet is being implemented as an avionics communication architecture. A commercial standard (ARINC-664) and an aircraft vendor-specific implementation known as avionics full duplex switched Ethernet (AFDX) have been developed that defines the topology and use of switched Ethernet in an avionics application. In avionics applications, the movement of data between devices must take place in a deterministic fashion and must be delivered reliably. All aircraft flight hardware must be tested to be sure that it will communicate information properly in the switched Ethernet network. The airframe manufacture must test the integrated network to verify that all flight hardware is communicating properly. Testing and maintenance testing is required to perform data communication level testing of switched Ethernet architectures for avionics applications to insure that all communication is deterministic and reliable. This paper provides an overview of a switched Ethernet avionics network and identifies the testing challenges associated with a switched Ethernet avionics application. A practical implementation performing the required tests is discussed.     

Data link communication equipment approved by USAF for civil air traffic control

Operations within civil airspace will transition from traditional ground-based air traffic control (ATC) to air traffic management (ATM), a concept that requires aircrews and ground managers to share responsibility of aircraft separation assurance. Increased levels of information exchange will be necessary for this concept to work safely; therefore, air-ground communications will transition from voice to data link communications. The nature of data link communications procurement requires that avionics suppliers not only verify their products meet contractual performance requirements, but also demonstrate that their products are compatible with civil communication networks and ATC. In addition, the USAF needs to demonstrate that their crew-training program is adequate to maintain the required level of aircrew proficiency and equipment can be maintained for the required level of system performance, integrity, and interoperability with the civil environment. This paper outlines some of the certification issues facing the USAF with respect to the "Approval for Use" of data link equipment to be used for communication with ATC. It will also suggest a methodology for the avionics supplier and USAF to obtain the approvals required to ensure the installation of data link communications equipment on military aircraft will remain interoperable with civil ATC.     

40G以太网在航电系统中的应用初探

随着飞机整体性能的提升，航电系统的发展日新月异，对总线网络提出了越来越高的要求。基于远端内存直接访问技术传输机制的以太网以其高带宽、低延时以及生态开放性的特点，在航电系统总线中逐渐得到推广。本文介绍了航电总线网络的发展，对典型的航电总线进行了对比分析，开展了10G/40GE交换工程样机的研制和测试工作，为下一代航电系统总线网络的选型提供了参考。     

ARINC659总线在IMA架构中的适用性分析

综合模块化航电系统在飞机航电设备的研制中逐渐得到应用,实现综合化模块化航电的一个关键技术是系统内部总线的选择,通过论述综合模块化航电系统对系统内部总线的要求、介绍ARINC659总线的特点,分析ARINC659总线在综合模块化航电系统中的适用性,可以得出ARINC659总线能够满足综合模块化航电系统的要求,目前ARINC659总线已经开始广泛应用于综合模块化航电系统中.     

1553 emulation over ATM (asynchronous transfer mode)-a hybridavionics communications architecture

The issue of meeting the higher communications requirements of future aircraft avionics systems in an incremental manner is addressed. A communications architecture is proposed which is based upon a switched network technology from the telecommunications area asynchronous transfer mode (ATM). However, the major step of migrating all existing avionics equipment into an ATM compliant form is avoided by the process of “emulating” a current avionics data bus such as MIL-STD-1553B over an ATM network. This allows current 1553 subsystems to co-exist with ATM compliant equipment on a single physical ATM network     

航空电子设备研制的测试性设计考虑

测试性是航空电子设备基本设计特性,测试性设计的好坏直接决定了航空电子设备感知自身状态(正常、故障和降级)并自动隔离内部故障的能力。从全寿命周期费用探讨了民用飞机航空电子设备开展测试性设计的必要性,给出了民用飞机研制过程中航空电子设备通用测试性设计、机内测试设计和电路及元器件的测试性设计考虑。实践证明航空电子设备开展测试性设计能有效提高民用飞机的功能安全性和维修经济性。     

Open systems avionics network to replace MIL-STD-1553

This paper is a proposal for a future method of avionics data communication. The need for this proposal results from the shortcomings in the current avionics architecture, video distribution network, and in the MIL-STD-1553 data communication system. The separately wired video and data communication systems can be combined to save weight, which is especially critical for rotorcraft. Aircraft, once fielded, have limited capacity for modification and improvement due to fixed computer throughput and processing performance, network bandwidth, and space available in the avionics equipment bays. The changes proposed by this paper are to be made in conjunction with the replacement of the redundant computer boxes with open system avionics functions on industry standard circuit cards. This open architecture approach was developed over the last ten years and is now being implemented in many aircraft applications including the F-22 and the RAH-66 programs. The V-22 rotorcraft, which although just entering production, is being modified for joint service customers where modern computer performance and expanded data network bandwidth is needed. The changes of this proposal will fill this need, reduce the weight of upcoming production models, and provide growth or spare capability so that additional video and data components can be added with minimal effect on existing components. This paper examines the current V-22 avionics video and data communication hardware and wiring and propose a new implementation of open system architecture standards with integrated digital video and data communication based on ANSI standard copper fibre channel     

Integrated flight/fire control for attack helicopters

It is shown that integrated flight and fire control modes, analogous to those used in fixed-wing applications, can be implemented to enhance an attack helicopter's air-to-air and air-to-ground combat effectiveness. With fly-by-wire active flight controls and state-of-the-art technology in target acquisition and tracking, integrated flight/fire control can increase firing opportunities, improve weapon accuracy and enhance survivability. Two typical applications are illustrated, using detailed simulations of the fly-by-wire controlled helicopter and associated weapons systems. The avionics architecture needed to implement an integrated system is described, and it is shown that it is achievable with straightforward extensions of designs already in place for advanced versions of the AH-64 aircraft     

航电记录数据加密算法的研究

军用飞机的航空电子系统在飞机飞行过程中所产生和使用的飞行数据因没有相应的保护措施,在某些情况下往往容易被窃取,甚至在危急时只能以毁掉数据存储卡里珍贵的数据为代价来保密。本文分析了几种密码算法的原理及其脆弱性,提出了一种综合运用对称密码技术和非对称密码技术来对飞行数据进行加密的设计方法。     

Aviation electronics/avionics

International regulations prohibit aircraft from entering high-density airspace and heavily trafficked over-ocean airways without suitable avionics. The widespread use of GPS navigation and increasing complexity of passenger entertainment systems have become the latest electronics trends on large commercial aircraft. The cost of avionics plus software is approaching 50% of the total. New aircraft have multiple computers and millions of lines of software. The following sections present the most important avionics subsystems and highlight some differences between military and commercial aircraft     

基于AFDX的特种飞机任务电子系统总线应用研究

随着航空电子系统综合化程度的不断提高,对数据总线的通信能力提出了更高的要求,此需求对于具备较高信息收集能力的特种飞机任务电子系统来说尤为突出.本文提出了一种基于航空全双工交换式以太网(AFDX)的特种飞机任务电子系统构建思路,并对其进行了分析与验证.     

The future of transportation systems

The emergence of a world-wide duopoly in the design and production of large commercial aircraft at the end of the 1990s and cutbacks in aerospace and defense has put significant pressure on the number of avionics manufacturers. A similar duopoly exists very nearly for US military aircraft. In 1999, mergers created two large avionic suppliers in the USA. European avionics suppliers have also been consolidating. At worst, these larger entities will have a negative effect upon US aerospace employment, and further discourage the best and brightest engineers. Commuter and general aviation, where competition still reigns (more than ten manufacturers exist in 2000), may lead the avionics charge into the future     

Optical fiber wavelength division multiplexing

During flight, aircraft avionics transmit and receive RF signals to/from antennas over coaxial cables. As the density and complexity of onboard avionics increases, the electromagnetic interference (EMI) environment degrades proportionately, leading to decreasing signal-to-noise ratios (SNRs) and potential safety concerns. The coaxial cables are inherently lossy, limiting the RF signal bandwidth while adding considerable weight. To overcome these limitations, we have investigated a fiber optic communications link for aircraft that utilizes wavelength division multiplexing (WDM) to support the simultaneous transmission of multiple signals (including RF) over a single optical fiber. Optical fiber has many advantages over coaxial cable, particularly lower loss, greater bandwidth, and immunity to EMI. In this paper, we demonstrate that WDM can be successfully used to transmit multiple RF signals over a single optical fiber with no appreciable signal degradation. We investigate the transmission of FM and AM analog modulated signals, as well as FSK digital modulated signals, over a fiber optic link (FOL) employing WDM. We present measurements of power loss, delay, SNR, carrier-to-noise ratio (CNR), total harmonic distortion (THD), and bit error rate (BER). Our experimental results indicate that WDM is a fiber optic technology suitable for avionics applications.     

光纤通道交换网络WRR实时调度算法分析

 随着综合航电系统的发展,1553B总线已经不能满足发展的需要,光纤通道交换式网络作为新一代高性能网络通信协议被引入到航电系统中,其性能指标与整个航电系统的总体指标有着密切的关系.为了解决系统消息实时发送的问题,研究了光纤通道交换网络实时条件下加权轮询调度算法的通信性能,利用随机Petri网对光纤通道交换网络的调度过程进行了建模,通过对模型的仿真和分析,得到了数据传输量及传输时限变化时系统网络负载、延迟时间、超时消息所占比例等重要性能指标,并分析了调度算法的性能.仿真结果证明光纤通道交换式网络具有高速稳定性,加权轮询调度算法能够满足消息传输的实时性、公平性要求.     

Open system concepts for modular avionics

Advanced communications, guidance and navigation systems play key roles in determining superiority of one combat aircraft over another. The use of advanced technology is essential to meeting the mission requirements of present as well as future aircraft. Modular avionics are being used in next generation aircraft, such as the Air Force F-22 fighter and the Army Comanche helicopter, as the means of achieving higher levels of performance, including reduced volume and improved adaptability, maintainability, and expandability. New system acquisitions such as Joint Strike Fighter will attempt to achieve these same performance levels but at dramatically reduced life cycle cost. Retrofit applications will also take on increasing roles in meeting this affordability need as the Department of Defense (DoD) struggles to maintain readiness in the face of the shrinking defense budget. The government is encouraging the use of open standards practices as a means of addressing the affordability issue. The Open Systems Joint Task Force (OS-JTF), formed in September 1994, is chartered to “sponsor and accelerate the adoption of open systems in weapons systems and subsystem electronics to reduce life-cycle costs and facilitate effective weapon system intra- and interoperability”. The purpose of this paper is to relate the concept of open systems to modular avionics. It discusses the key attributes of an open systems approach and identifies key technologies necessary for its success     

新一代航空电子总线系统结构研究

航空电子总线系统结构是航空电子系统的神经中枢,直接决定着航空电子综合化程度的高低和性能的优劣。本文通过对航空电子数据总线结构现状和发展要求的分析,提出了新一代航空电子总线系统的设计原则和体系结构,并论述了其核心技术综合模块化航空电子系统的通用模块和综合核心处理机的组成。