General Relativity Accuracy Test (GReAT): New configuration for the differential accelerometer

We presents the results of an activity concerning the test of the Einstein Weak Equivalence Principle with an accuracy of about 5 × 10⁻¹⁵. The experiment will be performed in an “Einstein elevator” using a differential accelerometer with a final sensitivity of about 10⁻¹⁴ g_⊕/Hz^1/2. The differential accelerometer is spun about an horizontal axis at a frequency in the range 0.5–1 Hz in order to modulate, during the free fall, the signal from a possible violation of the Equivalence Principle. In the paper the perturbing effects with the same signature of the possible violation are analyzed and constrained. The experimental results obtained in the laboratory with a first prototype of the differential accelerometer are discussed, comparing this results with those obtained using a new prototype.     

Testing Modified Newtonian Dynamics with LISA Pathfinder

We suggest that LISA Pathfinder, a technology demonstrator for the future gravitational wave observatory LISA, could be used to carry out a direct experimental test of Modified Newtonian Dynamics (MOND). The LISA Pathfinder spacecraft is currently being built and the launch date is just a few years away. No modifications of the spacecraft are required, nor any interference with its nominal mission. The basic concept is to fly LISA Pathfinder through the region around the Sun-Earth saddle point, in an extended mission phase, once the original mission goals are achieved. We examine various strategies to reach the saddle point, and find that the preferred strategy, yielding relatively short transfer times of just over 1 year, probably involves a lunar fly-by. LISA Pathfinder will be able to probe the intermediate MOND regime, i.e. the transition between deep MOND and Newtonian gravity. We present robust estimates of the anomalous gravity gradients that LISA Pathfinder should be exposed to, based on MONDian effects as derived from the Tensor-Vector-Scalar (TeVeS) theory. The spacecraft speed and spatial scale of the MOND signal combine in a way that the spectral signature of the signal falls precisely into LISA Pathfinder’s measurement bandwidth. We find that if the gravity gradiometer on-board the spacecraft achieves its currently predicted sensitivity, these anomalous gradients could not just be detected, but measured in some detail.     

Improved kHz-SLR tracking techniques and orbit quality analysis for LEO missions

Satellite gravity field missions such as CHAMP, GRACE and GOCE are designed as low Earth orbiting spacecraft (LEO) with orbit heights of about 250–500 km. The challenging mission objectives require a very precise knowledge of the satellite orbit position in space. For these missions precise orbit information is typically provided by GPS satellite-to-satellite tracking (SST) observations supported by satellite laser ranging (SLR).     

Atomic clocks for astrophysical measurements

Recently developed atomic hydrogen masers have achieved stability well into the 10^?16 domain for averaging time intervals beyond 1000 sec and future devices promise further improvements. These devices are very adaptable for space use in very high precision measurements of angle through Very Long Baseline Interferometry (VLBI) and range and range-rate through Doppler techniques. Proposed space missions using these clocks will be discussed for the measurement of the sun's gravity field distribution and tests of gravitation and relativity including a search for pulsed low frequency (～0.001 Hz) gravitational waves, and orbiting VLBI stations. Estimates of system performance capability will be discussed and the accuracy capability of relativistic measurements evaluated in terms of results from the 1976 NASA/SAO spaceborne clock test of the Einstein Equivalence Principle.     

Mars Phobos and Deimos Survey (M-PADS) – A martian Moons orbiter and Phobos lander

We describe a Mars ‘Micro Mission’ for detailed study of the martian satellites Phobos and Deimos. The mission involves two ∼330 kg spacecraft equipped with solar electric propulsion to reach Mars orbit. The two spacecraft are stacked for launch: an orbiter for remote investigation of the moons and in situ studies of their environment in Mars orbit, and another carrying a lander for in situ measurements on the surface of Phobos (or alternatively Deimos). Phobos and Deimos remain only partially studied, and Deimos less well than Phobos. Mars has almost always been the primary mission objective, while the more dedicated Phobos project (1988–89) failed to realise its full potential. Many questions remain concerning the moons’ origins, evolution, physical nature and composition. Current missions, such as Mars Express, are extending our knowledge of Phobos in some areas but largely neglect Deimos. The objectives of M-PADS focus on: origins and evolution, interactions with Mars, volatiles and interiors, surface features, and differences. The consequent measurement requirements imply both landed and remote sensing payloads. M-PADS is expected to accommodate a 60 kg orbital payload and a 16 kg lander payload. M-PADS resulted from a BNSC-funded study carried out in 2003 to define candidate Mars Micro Mission concepts for ESA’s Aurora programme.     

Free fall tests of the accelerometers of the MICROSCOPE mission

The MICROSCOPE mission is fully dedicated to the in-orbit test of the Universality of free fall, the so-called Weak Equivalence Principle (WEP), with an expected accuracy better than 10⁻¹⁵. The test principle consists in comparing the accelerations of two proof masses of different composition in the Earth gravitational field. The payload embarks two pairs of test-masses made of Platinum Rhodium and Titanium alloys at the core of two dedicated coaxial electrostatic accelerometers. These instruments are under qualification for a launch in 2016.     

The ESA SMART-1 mission to the Moon with solar electric propulsion

SMART-1 is planned to be the first Small Mission for Advanced Research in Technology of the ESA Scientific Programme Horizons 2000 for a launch at the end of 2001. The mission is dedicated to the testing of new technologies for preparing future cornerstone missions, using Solar Electrical Propulsion in Deep Space. The mission operational lifetime includes a 6–17 months cruise until a lunar orbit (300–10000 km) with 6 month operations. The SMART-1 spacecraft will be launched either on Ariane 5 as auxiliary passenger or on Eurockot. The expected launch mass is 350 kg. This allows to bring a dedicated payload with spacecraft, instrument and electric propulsion diagnostics technologies, as well as giving an opportunity for new lunar geophysical and geochemical studies, and for cruise science on the way to the Moon.     

Coherent matter wave inertial sensors for precision measurements in space

We analyze the advantages of using ultra-cold coherent sources of atoms for matter-wave interferometry in space. We present a proof-of-principle experiment that is based on an analysis of the results previously published in Richard et al. (2003) from which we extract the ratio h/m for ⁸⁷Rb. This measurement shows that a limitation in accuracy arises due to atomic interactions within the Bose–Einstein condensate. Finally we discuss the promising role of coherent-matter-wave sensors, in particular inertial sensors, in future fundamental physics missions in space.     

多普勒跟踪测量用于时空引力检验的尝试:(Ⅰ)理论建模

作为多普勒跟踪测量用于时空引力检验的尝试,在多普勒建模过程中加入了对于局部洛仑兹不变性(LLI)以及局部位置不变性(LPI)的检验参数。LLI/LPI是包括广义相对论在内的任何度规引力理论的基石。通过迭代求解多普勒建模过程中所需的光行时解,证明了只有在单程以及三程多普勒测量中可以检验LLI和LPI。鉴于该种测量手段无需额外载荷以及我国测控精度,可以尝试通过单/三程多普勒测量来检验LLI和LPI的科学目标。     

Multiple Sun–Earth Saddle Point flybys for LISA Pathfinder

LISA Pathfinder is an ESA mission due to be launched in the next two years. The gravity gradiometer onboard has the sensitivity required to test predictions by gravitational theories proposed as alternatives to Dark Matter such as TeVeS. Within the Solar System measurable effects are predicted only in the vicinity of gravitational saddle points (SP). For this reason it has been proposed to fly LPF by the Earth–Sun SP, at some 259,000 km from Earth. This could be done in an extension to the nominal mission which uses a Lissajous orbit about the Earth–Sun L1 point. The responsibility for LPF mission design lies with ESA/ESOC, who have designed the transfer trajectories, orbits about L1, and station keeping strategies. This article describes an analysis performed by Astrium to support a suggestion for a possible mission extension to a saddle point crossing. With only very limited fuel availability, reaching the saddle point is a significant challenge. In this article, we present recent advances in the work on trajectory design. It is demonstrated that reaching the SP is feasible once the LPF mission is completed. Furthermore, in a significant enhancement, it is demonstrated that trajectories including more than one SP flyby are possible, thus improving the science return for this proposed mission extension.     

Energetic particle environment in near-Earth orbit.

The hazard of exposure to high doses of ionizing radiation is one of the primary concerns of extended manned space missions and a continuous threat for the numerous spacecraft in operation today. In the near-Earth environment the main sources of radiation are solar energetic particles (SEP), galactic cosmic rays (GCR), and geomagnetically trapped particles, predominantly protons and electrons. The intensity of the SEP and GCR source depends primarily on the phase of the solar cycle. Due to the shielding effect of the Earth's magnetic field, the observed intensity of SEP and GCR particles in a near-Earth orbit will also depend on the orbital parameters altitude and inclination. The magnetospheric source strength depends also on these orbital parameters because they determine the frequency and location of radiation belt passes. In this paper an overview of the various sources of radiation in the near-Earth orbit will be given and first results obtained with the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) will be discussed. SAMPEX was launched on 3 July 1992 into a near polar (inclination 82 degrees) low altitude (510 x 675 km) orbit. The SAMPEX payload contains four separate instruments of high sensitivity covering the energy range 0.5 to several hundred MeV/nucleon for ions and 0.4 to 30 MeV for electrons. This low altitude polar orbit with zenith-oriented instrumentation provides a new opportunity for a systematic study of the near-Earth energetic particle environment.     

空间核电推进系统比质量优化建模及其木星探测应用分析

空间核电推进(Nuclear Electric Propulsion,NEP)系统是一种将核热能转换成电能,并驱动大功率电推力器而产生推力的革命性空间推进技术。和传统推进技术相比,NEP具有高比冲、大功率、长寿命等技术优势,非常适合未来大规模深空探测任务。基于NEP系统组成和小推力轨道理论,建立了以有效载荷为目标的NEP系统比质量优化模型。该模型能够解析NEP航天器的轨道运行时间、比质量、功率与有效载荷比的复杂耦合关系,为任务优化提供了计算依据。最后,利用该模型对NEP系统完成NASA "Juno号"航天任务进行了技术指标评估分析。计算表明,当NEP系统比质量达到4.8 kg/kWe时,其能将"Juno号"航天任务的地木转移时间由2 266 d缩短至665 d,有效载荷由160 kg提高到1 179 kg,极大地提高了航天器的探测能力,为任务方案的可行性论证和后续设计提供参考。     

空间引力红移实验的原理与精度

通过对文献[4, 5]关于空间引力红移实验原理与精度的分析,根据爱因斯坦惯性力与引力等效的原理,提出在航天器内部,重力的大部分被惯性力抵消,因而其中的微重力比轨道重力小很多(失重).因此,应当把星载原子钟的重力势取为与微重力相当的有效重力势,而不能简单地将星载钟的重力势取为轨道重力势.另外,检验相对论红移需要将理论值与实验值进行对比,这两种数值均具有误差,而检验精度取决于误差较大者.因此,如果不提高地球重力模型(例如EGM2008)精度而只提高测量精度则不能提高检验精度.     

Validation of the in-flight calibration procedures for the MICROSCOPE space mission

The MICROSCOPE space mission aims to test the Equivalence Principle with an accuracy of 10^-15${10}^{-15}$. The drag-free micro-satellite will orbit around the Earth and embark a differential electrostatic accelerometer including two cylindrical test masses submitted to the same gravitational field and made of different materials. The experience consists in testing the equality of the electrostatic acceleration applied to the masses to maintain them relatively motionless. The accuracy of the measurements exploited for the test of the Equivalence Principle is limited by our a priori knowledge of several physical parameters of the instrument. These parameters are partially estimated on-ground, but with an insufficient accuracy, and an in-orbit calibration is therefore required to correct the measurements. The calibration procedures have been defined and their analytical performances have been evaluated. In addition, a simulator software including the dynamics model of the instrument, the satellite drag-free system and the perturbing environment has been developed to numerically validate the analytical results. After an overall presentation of the MICROSCOPE mission, this paper will describe the calibration procedures and focus on the simulator. Such an in-flight calibration is mandatory for similar space missions taking advantage of a drag-free system.     

一种空间目标高精度指向控制方法

针对空间动目标指向任务对卫星提出的高精度控制需求，研究了卫星星体/快反镜二级复合系统的指向控制问题，给出了一种空间运动目标高精度指向控制方法。首先，基于近圆轨道Clohessy Wiltshire方程获得追踪卫星与目标卫星的位置信息；然后，基于扩展Kalman滤波算法进行多信息融合确定追踪卫星姿态参数，并实时解算出追踪卫星载荷光轴与目标卫星的相对姿态，获得跟踪指向所需的方位角和俯仰角；最后，通过星体一级姿态控制和基于快反镜的载荷光轴二级指向控制，实现对目标卫星的快速、高精度指向。仿真结果表明，该方法可以在保证快速性的同时实现动态指向控制误差小于072″。该方法可以实现对空间目标的高精度指向控制，为未来空间中激光通信等航天任务提供技术支持。     

The interstellar heliopause probe technology reference study

The interstellar heliopause probe (IHP) is one of ESA’s technology reference studies (TRS). The TRS aim to focus the development of strategically important technologies of relevance to future science missions by studying technologically demanding and scientifically interesting missions that are currently not part of the science mission programme.

Equipped with a highly integrated payload suite (HIPS), the IHP will perform in situ exploration of the heliopause and the heliospheric interface. The HIPS, which is a standard element in all TRSs, miniaturize payloads through resource reduction by using miniaturized components and sensors, and by sharing common structures and payload functionality.

To achieve the scientific requirements of the mission, the spacecraft is to leave the heliosphere as close to the heliosphere nose as possible and reach a distance of 200 AU from the Sun within 25 years. This is possible by using a trajectory with two solar flybys and a solar sail with characteristic acceleration of 1.1 mm/s², which corresponds to a 245 × 245 m² solar sail and a sail thickness of 1–2 μm. The trajectory facilitates a modest sail design that could potentially be developed in a reasonable timeframe.

In this paper, an update to the results of studies being performed on this mission will be given and the current mission baseline and spacecraft design will be described. Furthermore, alternative solar sail systems and enabling technologies will be discussed.     

A European probe to comet Halley

A European probe to comet Halley is proposed. The probe's model payload consists of 8 scientific instruments, viz. neutral, ion and dust impact mass spectrometers, magnetometer, medium energy ion and electron analyzer, camera, dust impact detectors and plasma wave experiment. Fly-by of the comet Halley nucleus will take place on November 28th, 1985, at about 500 km miss distance. The main spacecraft serves as relay link to transmit the observed data to Earth. As probe, a modified ISEE 2 design is proposed. Because of the cometary dust hazard expected in the coma a heavy dust shield (27 kg) is required, consisting of a thin front sheet and a 3 layer rear sheet. The probe is spin-stabilized (12 rpm), has no active attitude and orbit control capability and uses battery power only to provide about 1000 Wh for a measuring phase. A despun antenna transmits up to 20 kbit/s, in X-band. The total probe mass is estimated at 250 kg. The 3 model development programme should start in mid 1981 with Phase B.     

圆及椭圆轨道释放绳系子星的方法研究

研究绳系卫星系统质心沿椭圆轨道运动时，子星释放的最佳初始条件，运用变量替代简化动力学控制方程；对圆轨道运动的母星，采用轨道转移方法释放子星，计算弹射变轨参数及过渡轨道终了真近点角。本文取消母星质量远大于子星质量的假设，考虑子星释放过程中绳系卫星系统质心随子星运动的变化，所得结果更具有普遍意义。数值模拟结果表明，所述方法的有效性。     

Space debris mitigation strategies and practices in geosynchronous transfer orbits

Missions to geosynchronous orbits remain one of the most important elements of space launch traffic, accounting for 40% of all missions to Earth orbit and beyond during the four-year period 2000–2003. The vast majority of these missions leave one or more objects in geosynchronous transfer orbits (GTOs), contributing on a short-term or long-term basis to the space debris population. National and international space debris mitigation guidelines seek to curtail the accumulation of debris in orbits which penetrate the regions of low Earth orbit and of geosynchronous orbit. The orbital lifetime of objects in GTO can be greatly influenced by the initial values of perigee, inclination, and right ascension of the orbital plane, leading to orbital lifetimes of from less than one month to more than 100 years. An examination of the characteristic GTOs employed by launch vehicles from around the world has been conducted. The consequences of using perigees above 300 km and super-synchronous apogees, typically above 40,000 km, have been identified. In addition, the differences in orbital behavior of launch vehicle stages and mission-related debris in GTOs have been investigated. Greater coordination and cooperation between space launch service providers and spacecraft designers and owners could significantly improve overall compliance with guidelines to mitigate the accumulation of debris in Earth orbit.     

Low-thrust transfer to Backflip orbits

The aim of the work is to design a low-thrust transfer from a Low Earth Orbit to a “useful” periodic orbit in the Earth–Moon Circular Restricted Three Body Model (CR3BP). A useful periodic orbit is here intended as one that moves both in the Earth–Moon plane and out of this plane without any requirements of propellant mass. This is achieved by exploiting a particular class of periodic orbits named Backflip orbits, enabled by the CR3BP. The unique characteristics of this class of periodic solutions allow the design of an almost planar transfer from a geocentric orbit and the use of the Backflip intrinsic characteristics to explore the geospace out of the Earth–Moon plane. The main advantage of this approach is that periodic plane changes can be obtained by performing an almost planar transfer. In order to save propellant mass, so as to increase the scientific payload of the mission, a low-powered transfer is considered. This foresees a thrusting phase to gain energy from a departing circular geocentric orbit and a second thrusting phase to match the state of the target Backflip orbit, separated by an intermediate ballistic phase. This results in a combined application of a low-thrust manoeuvre and of a periodical solution in the CR3BP to realize a new class of missions to explore the Earth–Moon neighbourhoods in a quite inexpensive way. In addition, a low-thrust transit between two different Backflip orbits is analyzed and considered as a possible extension of the proposed mission. Thus, also a Backflip-to-Backflip transfer is addressed where a low-powered probe is able to experience periodic excursions above and below the Earth–Moon plane only performing almost planar and very short transfers.