A numerical model for bird strike on sidewall structure of an aircraft nose

In order to examine the potential of using the coupled smooth particles hydrodynamic(SPH) and finite element(FE) method to predict the dynamic responses of aircraft structures in bird strike events, bird-strike tests on the sidewall structure of an aircraft nose are carried out and numerically simulated. The bird is modeled with SPH and described by the Murnaghan equation of state, while the structure is modeled with finite elements. A coupled SPH–FE method is developed to simulate the bird-strike tests and a numerical model is established using a commercial software PAM-CRASH. The bird model shows no signs of instability and correctly modeled the break-up of the bird into particles. Finally the dynamic response such as strains in the skin is simulated and compared with test results, and the simulated deformation and fracture process of the sidewall structure is compared with images recorded by a high speed camera. Good agreement between the simulation results and test data indicates that the coupled SPH–FE method can provide a very powerful tool in predicting the dynamic responses of aircraft structures in events of bird strike.     

Damage sensitivity of a wing-type leading edge structure impacted by a bird

On the windward side of an aircraft, the components with higher probability of impact with birds are the wing-type leading edge structures, such as the wing and tail. A study on the damage sensitivity of a wing-type leading edge structure under bird strikes was presented in this paper. First, a bird strike test was carried out on a wing. The principles of the bird strike test equipment and method were introduced in detail, including the bird strike test system, bird projectile production process and data acquisition system. The dynamic strain measurement results, the high-speed camera videos, and the final deformation and damage morphology observations of the structure were obtained. Based on the coupled Smooth Particle Hydrodynamics (SPH) - Finite Element Method (FEM), the commercial software PAM-CRASH was used to simulate the process of a bird strike with the wing. The good agreement between the finite element simulation results and the experimental results shows that the calculation method and the numerical model presented in this paper were reasonable. On this basis, wing-type leading edge structures can be designed by adding triangular support. The bird strike resistances of an original structure and improved structure were studied by numerical simulation. The calculated results show that the improved wing-type leading edge structure is less damaged than the original structure under bird strike. The improved leading edge structure satisfied the anti-bird strike airworthiness requirements, as the thickness of the triangular support was 1.2 mm, and the weight of the structure was reduced by 0.87 kg compared with the original structure. This indicated that the bird strike resistance of the improved structure is better than that of the original structure, and the improved design of the wing-type leading edge structure presented in this paper is reasonable.     

Mass and performance optimization of an airplane wing leading edge structure against bird strike using Taguchi-based grey relational analysis

Collisions between birds and aircraft are one of the most dangerous threats to flight safety. In this study, smoothed particles hydrodynamics (SPH) method is used for simulating the bird strike to an airplane wing leading edge structure. In order to verify the model, first, experiment of bird strike to a flat aluminum plate is simulated, and then bird impact on an airplane wing lead-ing edge structure is investigated. After that, considering dimensions of wing internal structural components like ribs, skin and spar as design variables, we try to minimize structural mass and wing skin deformation simultaneously. To do this, bird strike simulations to 18 different wing structures are made based on Taguchi’s L18 factorial design of experiment. Then grey relational analysis is used to minimize structural mass and wing skin deformation due to the bird strike. The analysis of variance (ANOVA) is also applied and it is concluded that the most significant parameter for the performance of wing structure against impact is the skin thickness. Finally, a validation simu-lation is conducted under the optimal condition to show the improvement of performance of the wing structure.     

鸟撞飞机风挡动态响应数值模拟方法研究现状

总结了目前用于鸟撞飞机风挡动态响应的数值模拟方法,主要有解耦解法、耦合解法和光滑质点动力学法,其中耦合解法涉及接触-碰撞耦合解法和流固耦合解法。各种方法围绕鸟体（鸟撞载荷）的模拟和风挡的模拟,部分内容针对鸟撞击发动机叶片、雷达罩和垂直尾翼等,但其方法同样适用于飞机风挡,最后指出应进一步深入研究的内容。     

典型前缘结构抗鸟撞性能改进研究

 针对某典型前缘结构,研究了使用纤维金属层板(Fibre Metal Laminates,FMLs)蒙皮进行抗鸟撞设计的可行性。以显式动态冲击分析程序PAM-CRASH为平台,结合由鸟撞平板试验结果验证的鸟体本构模型参数,建立了鸟撞前缘结构数值模型。通过计算研究了使用不同蒙皮(铝合金、FMLs)的前缘结构在鸟撞作用下的变形破坏模式及吸能效果。结果表明：采用适当铺层的FMLs蒙皮可以有效地提高前缘结构的抗鸟撞性能。研究结论对飞机结构的抗鸟撞研究具有一定的参考价值。     

用SPH和有限元方法研究鸟撞飞机风挡问题

鸟与飞行中的飞机相撞是飞机结构损坏的重要因素,严重时会引发机毁人亡的灾难性事故。对高速低空飞行的军用飞机而言,风挡部分抗鸟撞的研究对保证飞行安全尤其重要。基于飞机圆弧风挡受鸟体撞击的实验观察,建立了国产某型军用飞机圆弧风挡及鸟体的计算模型,采用LS-DYNA3D中有限元和光滑粒子流体动力学(SPH)耦合的数值分析方法,对某飞机圆弧风挡受鸟体撞击的过程进行了数值模拟。计算结果得到了风挡结构的变形、位移和应变等几方面的数据,与实验结果基本吻合。同时,给出了500～650km/h速度范围内的撞击力和应力时程曲线、风挡发生破坏的临界撞速、圆弧风挡经受鸟体撞击时发生破坏的可能位置及其破坏方式。最后,与鸟体采用任意拉格朗日(ALE)和无网格伽辽金方法(EFG)进行了对比,验证了SPH方法在分析鸟撞问题中的优越性。研究结果为风挡的安全设计和研制新机型提供了有价值的数据。     

Numerical simulation of a rotary engine primary compressor impacted by bird

In order to examine the process of a rotary engine primary compressor impacted by bird, a finite element model of a bird impacted on plate is developed with the explicit code PAM-CRASH. The smooth particles hydrodynamic (SPH) method is used to simulate the bird because of the SPH method showing no signs of instability and correctly modeling the breaking-up of the bird into particles. Good agreement between the simulation results and experimental results indicates that the numerical method of bird strike used in the present paper is reasonable. Then a rotary engine primary compressor impacted by three different configurations bird named straight-ended cylinder bird, quadrangular bird, hemispherical-ended bird are investigated using the numerical simulation method. It is found that the whole process of bird strike sustained about 3.5 ms and the bird is slashed by blade during the strike. The geometry configuration of bird affected the displacement and von Mises stress of some blades severely, just because the breaking bird’s mass is affected by the bird’s configuration. In the event of bird striking on the site of"up"some blades may develop plastic deformation and it is very adverse for the safety work of the engine.     

民机机头复合材料风挡结构鸟撞分析

在鸟体撞击风挡结构过程中,鸟体与风挡结构撞击相对速度很大,呈现出流体特性,属于典型的流固耦合瞬态冲击动力学问题。首先针对文献中的鸟撞铝板试验采用任意的拉格朗日-欧拉(ALE)流固耦合方法进行了分析,对计算方法与鸟体模型进行了验证。然后建立了包括风挡玻璃、风挡骨架以及蒙皮在内的民机全尺寸风挡结构抗鸟撞动响应分析的有限元模型,进行了鸟撞数值模拟,其中风挡骨架与蒙皮采用复合材料。全尺寸的复合材料风挡骨架目前还没有应用到民机上,因此,对复合材料风挡结构的研究是很有意义的。     

基于ANSYS Workbench鸟撞飞机风挡有限元分析

利用ANSYS Workbench三维有限元软件,建立了鸟撞飞机风挡的力学分析模型,形成了一套完整合理的鸟撞飞机动态响应分析方法。其中,对模型建立和约束施加等提出了简便的处理方法,并且进行了比较详细的描述。通过有限元分析模拟计算鸟撞飞机前风挡的动态响应,得出了风挡的应力、位移及其分布规律,并与试验结果进行比较,两者吻合较好,可为新型风挡结构设计提供参考。     

民用飞机方向舵抗鸟撞分析研究

民用飞机方向舵结构通常位于垂尾后部,通过连接铰链与垂直安定面后缘相连,并通过作动器驱动其偏转,从而为飞机提供偏航力矩。对民用飞机方向舵鸟撞相关适航条款要求进行了分析,明确了方向舵抗鸟撞需要满足的具体要求。在完成上述工作后,对某型民机方向舵的抗鸟撞性能进行了全面的评估。首先通过工程算法,初步评估了该方向舵不同偏角下的鸟体撞击力,并以此为依据筛选出了鸟撞的严酷工况,避免了大量计算方向舵不同偏角的鸟撞情况,从而大大降低了仿真分析的工作量。通过SPH方法,使用PAM-Crash软件对方向舵结构进行了抗鸟撞分析,得到了方向舵翼面本体结构的损伤情况、连接铰链的受载情况和方向舵作动器的受载情况,并以此为依据,完成了对方向舵抗鸟撞性能的完整评估。     

大型民用飞机风挡鸟撞的适航分析与数值仿真

鸟撞一直都是航空安全的隐患,对此需要有相应的适航条款来表明民用飞机相关部件的抗鸟撞性能符合要求。针对风挡鸟撞问题现状,分析了目前民用飞机鸟撞适航验证的方法和手段,对比研究了不同鸟撞数值模型,通过计算机辅助设计软件建立了某型民用飞机风挡三维几何模型,采用显式非线性数值分析软件ANSYS/LS-DYNA进行风挡鸟撞过程的数值仿真分析,以期为大型民机风挡鸟撞适航验证提供更有效的方法和手段,提高适航验证工作效率,降低工作成本。     

基于LS-DYNA和HyperMesh的某型飞机垂尾翼尖前缘鸟撞分析

飞机的鸟撞事故是一种突发性和多发性的飞行事故,轻则飞机受损,重则机毁人亡.在飞机设计过程中,为了通过严格的适航条例,需要进行大量的鸟撞试验.随着有限元理论和计算机软、硬件的发展,利用计算机仿真技术进行飞机结构的抗鸟撞设计分析可以减少试验数量或者加强试验针对性,提高试验效率.基于LS-DYNA软件和前处理软件HyperMesh,利用光滑粒子法（SPH）与有限元耦合算法,采用带失效模型的短梁单元模拟铆钉失效,对某型飞机垂尾前缘进行鸟撞分析.通过对应力和位移结果的分析以及对沙漏能的有效控制,表明本文提出的建模方法具有满足工程要求的准确性,符合适航条例的规定.     

全尺寸复合材料垂尾前缘抗鸟撞仿真与试验

基于Pam/crash软件,建立SPH鸟体模型,仿真分析了两种工况:芳纶与玻璃钢全尺寸复合材料垂尾前缘分别在3.6 kg鸟体以114 m/s速度冲击下的动力学特性;通过模拟与试验结果的对比,验证了仿真方法有效。结果表明:在鸟体与结构接触区域以及前缘与盒段连接区域,需要划分更为精细的网格以真实模拟实际情况;芳纶及玻璃钢前缘的抗鸟撞性能与蒙皮的具体铺层信息相关。仿真及试验方法对工程设计具有实际参考价值。     

发动机一级转子抗鸟撞试验与数值模拟研究

鸟撞发动机在鸟撞事故中最容易造成飞机损坏失事的情况,为了研究发动机一级压气机转子抗鸟撞适航性能,对发动机转子在工作状态下进行鸟撞试验,鸟体质量为1 000 g,撞击速度为195 m/s,发动机一级转子转速为8 525 r/min;基于显式碰撞动力分析软件PAM-CRASH 建立相应的叶片鸟撞数值计算模型,通过与试验结果的对比来验证本文计算模型的合理性;根据发动机适航条例分析不同工况下发动机一级转子抗鸟撞性能。结果表明：大鸟撞击相比于中鸟鸟群和小鸟鸟群,对于叶片的撞击结果更加恶劣;叶尖位置撞击会引起叶尖部位的大变形,叶根和叶中位置撞击会引起叶片根部较大的集中应力,导致叶片断裂。     

基于响应面法的鸟撞风扇叶片损伤预测

有限元模拟鸟撞风扇叶片损伤成本高,为解决工程问题,采用经典叶栅鸟撞切割模型建立了鸟撞风扇叶片动载荷数学模型,结合鸟撞部件试验结果,以拟合技术明确风扇叶片损伤程度与最大关键动载荷计算值间的函数关系,形成叶片损伤预测响应面,实现对鸟撞风扇叶片损伤的快速预测,并建立基于响应面法的鸟撞风扇叶片损伤预测工作流程。结合涡扇发动机吞鸟试验技术要求、风扇结构设计特征及已开展的鸟撞部件试验结果,建立叶片损伤预测响应面,初步识别2种鸟撞方案的径向弯曲、弦向弯曲,并计算撕裂范围分别不超过0.3867和0.3941,撕裂与弦向弯曲相关性显著,呈抛物线变化趋势。结果表明：预测的损伤在可接受的安全性水平范围内,预测方法能够识别损伤范围及趋势,可为后续鸟撞有限元模拟、试验策划、安全性分析、风扇叶片抗鸟撞设计等工作提供量化的技术支持。     

某型飞机平尾前缘抗鸟撞优化设计

进行了某型飞机部分平尾前缘结构的抗鸟撞优化设计。通过有限元分析对比研究了蒙皮厚度、翼肋个数、隔板对平尾前缘抗鸟撞性能的影响。从分析结果可以看出,增加隔板的方案对结构抗鸟撞性能的提高最明显。然后,进行了增加隔板的平尾前缘结构鸟撞试验,试验结果与模拟结果吻合良好,满足结构的抗鸟撞要求。     

民用飞机吊挂指形罩鸟撞分析

指形罩结构位于吊挂前缘,作为动力装置整流罩体的一部分,为吊挂及发动机提供气动外形,并为燃油、液压、电气、环控等系统管路提供保护和通路。指形罩的位置及功能决定了其结构必须满足鸟撞要求,承受鸟体撞击后不能影响飞机安全。通常采用鸟撞试验对指形罩结构抗鸟撞性能进行适航验证。为了降低适航验证周期和成本,一般通过鸟撞分析来降低取证试验的撞击点数量。介绍了一种吊挂指形罩鸟撞分析过程和方法,并对分析方法进行了工程试验验证,得到一种可靠的指形罩鸟撞分析方法,为类似的飞机整流结构的鸟撞分析提供了参考。     

Glare层合板的抗鸟撞分析

飞机结构的抗鸟撞性能对于飞行安全有着直接的联系,鸟撞事故一旦发生,对飞机结构、设备的破坏作用往往极为严重。针对Glare层合板材料进行了抗鸟撞分析,利用有限元方法,采用显式碰撞动力分析软件PAM-CRASH,对四种不同纤维铺层角的Glare层合平板进行了抗鸟撞仿真分析,比较选取了最优的纤维铺层角;设计了全尺寸的机翼前缘模型,对4/3和3/2两种构型的Glare层合蒙皮进行了抗鸟撞仿真。结果表明4/3构型的Glare层合蒙皮的抗鸟撞效果最好,该构型将被进一步应用于机翼抗鸟撞试验件的设计中。     

考虑鸟撞的航空发动机叶片动态拓扑优化设计

为了实现航空发动机冷端风扇叶片在考虑鸟撞情况下的轻量化设计,从结构拓扑优化计算的角度出发,对该问题展开深入的研究并提出具体的解决方案。针对叶片优化中存在的优化模型建立,结构动态工况优化,多条件约束并存处理,多工况联合优化等关键问题,进行了理论上的深入分析研究,阐述了结构多约束、多工况动态优化的理论基础,并结合相应的数值计算平台,提出了风扇叶片分步优化计算的方案,对航空发动机叶片进行拓扑优化计算。计算结果显示,最终的叶片轻量化结构满足所有鸟撞与离心载荷多工况的优化约束条件,拓扑结构中材料分布合理,在满足适航条例强度要求的同时质量减少达37.9%,具有一定的实际参考应用价值,同时所提出的动态优化计算方案,在工程结构的动态优化中具有广阔的应用前景。     

采用流固耦合的实体元空心叶片鸟撞数值模拟

针对目前通用流固耦合算法在模拟实体元结构破坏上存在不足,以MSC.Dytran软件为平台,研究和验证了不考虑失效和考虑失效的实体元平板叶片流固耦合数值模拟方法;在此基础上,结合大涵道比航空发动机工作过程中较为常见且非常严重的鸟撞事故,建立了实体元空心叶片鸟撞瞬态动力学有限元模型并进行相应计算,结果表明:计算较好地模拟了叶片在遭受鸟体撞击后会产生巨大的瞬时冲击应力,以及叶片由此产生局部塑性变形.最后模拟了叶片遭受鸟撞发生失效的过程.