Fiber optic fence sensor developments

Many detection technologies have been employed for perimeter detection, to sensitize a barrier. These outdoor perimeter fence detection sensors must reliably detect intruders attempting to cut or climb the barrier, while ignoring the effects of environmental noise, including nearby activity. In recent conference proceedings, the new IntelliFIBER/spl trade/ fiber optic based product was introduced and compared with previous technologies. IntelliFIBER is designed to provide the advantages of a nonconductive "dielectric" cable sensor, e.g., resistance to electromagnetic interference and the ability to provide longer cable zones. It utilizes the proven processor of the Intelli-FLEX/spl trade/ triboelectric cable fence sensor, which provides relay or bidirectional networked serial communications and is compatible with its calibration module. IntelliFIBER also capitalizes on the Intelli-FLEX's adaptive detection algorithms that were developed through extensive field-testing, to provide exceptional immunity to environmental alarms while still detecting the skilled intruder.     

Optimal Detection and Performance of Distributed Sensor Systems

Global optimization of a distributed sensor detection system withfusion is considered, where the fusion rule and local detectors aresolved to obtain overall optimal performance. This yields coupledequations for the local detectors and the fusion center.The detection performance of the distributed system with fusionis developed. The globally optimal system performance is comparedwith two suboptimal systems. Receiver operating characteristics(ROCs) are computed numerically for the problem of detecting aknown signal embedded in non-Gaussian noise.     

光纤传感器在测量领域的发展与应用

光纤传感器是近年来发展起来的一种新型传感器的技术，本文介绍了两种不同类型的新型光纤传感器的结构原理及在不同领域的应用，并介绍了光纤传感器在测量领域广阔的应用前景。     

Intelligent UUVs: Some issues on ROV dynamic positioning

Intelligent unmanned underwater vehicles (UUVs) fall under two main group categories: the remotely operated vehicles (ROVs), which are characterized by remote operation and presence of a tether cable; and the autonomous underwater vehicles (AUVs), which are characterized by their autonomous behavior and absence of a tether cable. One fundamental issue of the UUV design is the dynamic position control system. This system plays a crucial role together with the sensor architecture in the degree of system autonomy that can be achieved. This paper is concerned with a few issues when dynamically positioning remotely operated underwater vehicles (ROVs). By restricting the operating regime of ROVs to slow velocity requirements the paper investigates the implementation of a few decentralized control strategies and compare their performance measures, which are assessed by simulating a nonlinear ROV system model for each control strategy. Issues concerning input tracking, disturbance rejection, and plant variations are discussed. The evaluations consider the use of linear PID feedback and feedforward variants, and a robust nonlinear control strategies applied to a full order, fully coupled, and nonlinear vehicle model. These evaluations consider a vehicle undertaking standard mission activities where the tether cable dynamics, with load estimates obtained from a lumped mass cable model, and the vehicle actuator system are present. The paper shows that much of the performance deterioration may be attributed mainly due to cable inertia. The authors also verify that the nonlinear robust control strategy does not necessarily allow for better performance over the linear feedback control strategies implemented when vehicle motions are confined to slow velocity profiles. These and other partial results will aid the design of the control system for an underwater vehicle currently under construction     

电缆故障在线检测定位装置研究

电缆作为飞机电源系统的重要组成部分,实现电缆故障的在线诊断,可以提高其可靠性。采用扩展频谱时域反射法(SSTDR),基于FPGA技术,设计一种板级速率为500 MHz的飞机电缆故障在线检测和定位装置,并进行实验验证。结果表明:该装置能够实现电缆开路、短路以及间歇性电弧的在线检测和定位,具有定位精度高、实时性好等优点;利用该装置在线监测电缆的健康状态,实现难以复现的间歇性故障的检测,能够提高地面运营、维护效率,节省人力物力,具有较高的工程应用价值。     

Love波飞机结冰传感器研究

Love波结冰传感器有望应用于飞机结冰预测与监测,其通过Love波在导波层中的传播变化,来敏感导波层表面冰的厚度以及状态变化。在Zimmermann理论基础上,根据Love波结冰传感器实际结构,针对导波层为冰层及压电材料为ST90°X石英的实际实验情况进行了仿真计算,计算得到了冰层厚度与相速之间的特性关系,以及冰层厚度对灵敏度的影响,并与N.Bari等的灵敏度理论的计算结果进行了比较,结果表明Love波结冰传感器的灵敏度与相速的理论计算是正确的。通过初步的实验对Love波结冰传感器进行原理性的验证研究,实验结果表明Love波结冰传感器可以明显区分空气、水和冰的状态,实验数据符合理论计算的结果。     

On distributed detection with correlated sensors: two examples

The authors study the effect of correlated noise on the performance of a distributed detection system. They consider a suboptimal scheme by assuming that the local sensors have the same operating point, and that the distribution of the sensor observation is symmetric. This implies that the joint distribution of the sensor decisions, and therefore the fusion rule, are symmetric functions of the sensor decisions. The detection of a known signal in additive Gaussian noise and in Laplacian noise are considered. In both cases, system performance deteriorates when the correlation between the sensor noises is positive and increasing, whereas the performance improves considerably when the correlation is negative and increasing in magnitude     

斜拉桥拉索风雨激振理论模型和机理研究

斜拉桥拉索风雨激振的机理研究是国际风工程和桥梁工程领域的著名难题。本文设计、制作了可方便调节拉索模型倾角和风向角的试验装置以及用于测压试验的带人工雨线的拉索模型,并在风洞中进行了细致的试验。试验得到了具有典型倾角的拉索在不同风向角下,拉索和水线模型上的平均风压和脉动风压系数,以及气动力系数。在此基础上,建立了拉索风雨激振新的理论模型,计算分析了节段三维拉索的风雨激振响应及其机制。     

In-Flight Parity Vector Compensation for FDI

The performance of a failure detection and isolation (FDI) algorithm applied to a redundant strapdown inertial measurement unit (IMU) is limited by sensor errors such as input axis misalignment, scale factor errors, and biases. A techique is presented for improving the performance of FDI algorithms applied to redundant strapdown IMUs. A Kalman filter provides estimates of those linear combinations of sensor errors that affect the parity vector. These estimates are used to form a compensated parity vector which does not include the effects of sensor errors. The compensated parity vector is then used in place of the uncompensated parity vector to make FDI decisions. Simulation results are presented in which the algorithm is tested in a realistic flight environment that includes vehicle maneuvers, the effects of turbulence, and sensor failures. The results show that the algorithm can significantly improve FDI performance, especially during vehicle maneuvers.     

基于Ansoft的同面电容传感器的研究与仿真

阐述了利用同面电容传感器对复合材料进行无损检测的原理,运用AnsoftMaxwell有限元分析软件对不同极板间距和屏蔽电极形式的传感器进行仿真计算,比较分析了不同极板间距的传感器产生的电场强度变化趋势,研究了不同屏蔽电极对传感器检测特性的影响。仿真结果表明：传感器极板间距越大,检测深度越大,检测特性越好;在3种屏蔽电极中,环形屏蔽电极的检测特性最好。     

FDI Performance of Two Redundant Sensor Configurations

A geometrical interpretation of the generalized likelihood test (GLT) approach to sensor failue detection and isolation (FDI) is provided, and analytical expressions are derived to evaluate FDI performance parameters of interest. These results are used to determine the FDI performance which can be achieved when various FDI decision strategies are applied to two redundant sensor configurations: a conical array of five single degree-of-freedom sensors and a dodecahedron array of six single degree-of-freedom sensors.     

A Fault-Tolerant Multisensor Navigation System Design

The problem of soft-failure tolerant estimation in navigationsystems composed of multiple inertial measurement clusters and oneor more reference sensors is addressed. A new approach ispresented that achieves containment of failed sensor data, andisolates the historic good data provided by the unfailed sensors.Multiple (local) estimates are computed where the estimates areconditioned on different subsets of the sensors. A statistical overlaptest is used to determine the validity of the local estimates, and afailed sensor can be identified from analysis of the invalid localestimates. After the time of detection the most accurate estimatebased on all but the failed sensor is identified. The results areapplied to a dual-inertial/Doppler radar navigation system andsimulation results are presented.     

Evaluating Sensor Orientations for Navigation Performance and Failure Detection

A study of the constraints imposed by the choice of particular orientations of redundant inertial sensors upon navigation system performance and the detection and identification of sensor failures in fault-tolerant inertial measurement units is presented. Figures of merit are derived for systematically evaluating alternative sensor orientations. The volume of the ellipsoid associated with the covariance matrix of estimation errors is used to rank sensor orientations in terms of navigation performance. Distance measures commonly used in hypothesis testing are used to rank sensor orientations in terms of the detectability of sensor failures. The application of these results is illustrated for configurations of four 2-degree-of-freedom gyroscopes.     

高温耐辐照声发射传感器

研制了一种新的耐高温抗辐照声发射传感器,并讨论了传感器制作工艺上的特点和优点。在经受400℃和2.4×10~6GYγ辐照的考验后,传感器仍保持性能稳定。     

基于小生境遗传算法的分布式OS-CFAR检测系统优化与性能分析

 利用小生境遗传算法,对不同检测窗长度和检测信噪比的三传感器分布式 OS-CFAR检测系统进行了优化设计,给出了一组针对不同检测环境与融合方式的搜索结果。分析表明,对于非一致环境下分布式 OS-CFAR检测系统,小生境遗传算法是一种良好的优化算法。利用搜索结果,研究了不同融合方式下环境变化对分布式 OS-CFAR检测系统的性能影响,结果表明,“或”融合对检测环境的非一致变化具有较强的鲁棒性,而“3选2”融合和“与”融合对检测环境的变化比较敏感。     

改进的容错惯性导航系统

 用于余度捷联惯性测量单元(IMU)的故障检测及分离(FDI)方法的性能受到诸如输入轴不准,刻度因子误差以及偏倚这样的传感器误差的限制。本文采用分离偏倚估计方法以获得上述影响奇偶向量的传感器误差的线性组合的估计,然后将这些估计用于构成补偿的奇偶向量,该奇偶向量不包括传感器误差的影响。用经补偿的奇偶向量代替未经补偿的奇偶向量进行故障检测及分离判决以提高FDI的性能。仿真结果表明奇偶向量补偿算法可大大提高FDI的性能,特别是在飞行器做机动飞行时。     

飞机整机线缆自动化集成检测技术研究现状和发展

飞机整机线缆集成检测是飞机总装过程中的一项重要工作,是关乎线缆制造质量高低的一个关键环节,在航空制造企业受到了广泛重视。对飞机整机线缆检测方法进行了比较和分析,介绍了线缆自动化集成检测的内涵和主要研究内容,对比分析了国内外线缆自动化集成检测的研究现状,分析和指出了线缆自动化集成检测存在的问题以及发展趋势。最后对数字孪生技术在线缆自动化集成检测领域中的应用进行了展望。     

基于卡尔曼滤波器和遗传算法的航空发动机性能诊断

以某型涡扇发动机为研究对象,构建了基于卡尔曼滤波器和遗传算法的航空发动机性能诊断方法。卡尔曼滤波器根据发动机可测参数偏离额定特性时的变化量,对发动机性能参数进行了估计。当传感器存在测量偏差时,会使滤波器估计结果偏离真实情况。遗传算法以机载模型输出与发动机测量参数之间的误差最小为目标,通过优化计算,找出存在测量偏差的传感器,确定其偏差,并最终消除测量偏差对性能诊断的影响。     

涡轮叶片CT图像边缘提取的最优算子研究

为了解决叶片计算机断层(computed tomograghy,简称CT)图像边缘提取精度低效率差的问题,以解析法提取边缘的理论为基础,推导了适用于CT图像边缘提取的最优算子,并通过定量计算与模拟标准图像对最优算子的性能进行了分析,结果表明最优算子在抗噪、定位精度以及单像素响应等方面都比传统的边缘提取算子更为优越.实际应用最优算子提取的叶片边缘更光顺,噪声点以及伪边缘更少,进一步证明了最优算子在CT图像边缘提取方面有着明显的优势.