商业静止卫星发射现状和未来预测

发射地球静止轨道(GEO)商业卫星数量最多的一年是1996年,卫星数量达到了30颗.但1996年以后,GEO商业卫星发射数量连续3年下降.虽然2000年发射数量出现反弹,不过2001年又大幅下降,而2002年GEO 卫星数量有一定的增加.在2003-2005年,GEO卫星发射数量相对平稳,平均每年发射约16颗.表1列出了1996-2005年发射的GEO商业卫星数量统计.     

卫星与测站钟差支持条件下的GEO卫星精密定轨

在基于伪距的GEO卫星精密定轨中, GEO卫星的静地特性导致定轨解算无法对星地组合钟差进行有效估计, 需要独立的时间同步支持. 本文讨论了卫星和测站钟差支持条件下的GEO卫星定轨原理, 利用仿真数据系统地分析了中国区域网跟踪条件下GEO卫星的定轨精度, 从定性和定量角度分析了钟差二次项、星地时间同步精度、站间时间同步精度及系统差等因素对定轨精度的影响.      

混合星座导航卫星广播星历相关问题研究

GPS卫星广播星历参数具有参数少、物理意义明确以及精度高等特点,可以考虑将它应用于包含MEO、IGSO和GEO卫星的混合星座卫星导航系统。分析了采用GPs卫星广播星历参数时MEO、IGSO和GEO卫星的广播星历拟合精度,并且比较分析了在一个卫星的轨道周期内,广播星历参数拟合结果的变化规律。仿真结果表明,MEO、IGSO和GEO卫星的广播星历拟合误差最大在分米量级;MEO和IGSO卫星在一个轨道周期内星历参数拟合结果的变化规律相近,但是与GEO卫星的差异较大。     

星载GNSS确定GEO卫星轨道的积分滤波方法

采用星载全球导航卫星系统（GNSS）确定地球静止轨道（GEO）,以解决目前应用星载全球定位系统(GPS)时导航卫星可见性差的问题。以风云卫星为例,分析了未来的GNSS相对于GEO卫星的可见性,针对GEO轨道上导航接收机采样间隔较长的问题,综合轨道积分和卡尔曼滤波方法的优点,提出了确定GEO卫星轨道的积分滤波方法。并利用STK软件仿真产生所需数据,用MATLAB对提出的算法编程并进行仿真验证,结果表明,提出的方法性能优越,定轨精度较高。     

卫星组网构型设计及接入算法技术研究

为了弥补单层卫星网络的缺点,综合各单层卫星网络的优点,形成优势互补,为用户提供更好的服务质量,混合卫星网络应运而生.针对不同的卫星接入算法对卫星的服务质量的影响各不相同,重点研究设计更好的混合卫星网络和卫星接入算法.在分析GEO、MEO、LEO和HEO卫星网络各自的特点的基础上,综合其性能的好坏和设计实现的难易程度,设计并提出5 GEO+66 LEO的双层卫星网络及多QoS约束的卫星接入算法.最后通过仿真分析,验证该算法的正确性.     

基于机动力模型的GEO卫星恢复期间定轨

北斗卫星导航系统(BDS)中GEO卫星频繁的轨道机动对高精度、实时不间断的导 航服务需求提出了更高要求, 如何在短弧跟踪条件下提高GEO卫星轨道快速 恢复能力, 是提升导航系统服务精度的关键因素. 针对该问题, 本文提出了基 于机动力模型的动力学定轨方法, 尝试利用高精度的C波段转发式测距数据, 辅 以机动期间的遥测遥控信息建立机动力模型, 联合轨控前后的观测数据进行动 力学长弧定轨. 利用BDS中GEO卫星实测数据进行了定轨试验与分析, 结果表明, 恢复期间需要采用解算机动推力的定轨方法, 联合机动前、机动期间和机 动后4h数据定轨的轨道位置精度在20m量级, 径向精度优于2.5m. 该方 法克服了短弧跟踪条件下动力学法定轨和单点定位中的诸多问题, 提供了解决 GEO卫星机动后轨道快速恢复问题的技术方法.      

地球静止轨道卫星电推进位保策略研究

研究了利用电推进系统进行GEO卫星轨道保持问题,给出了一种基于日预报的位置保持策略。首先,根据GEO卫星轨道漂移规律,分析了小推力推进系统每日进行位保的可行性;然后,针对四电推力器配置构型,给出了每日轨道误差、各推力器工作时间与区间的预测方法;进一步,针对给定的定点位置,根据位保效果对电推进安装角进行了优化选择,并研究了推力变化对位保效果和燃料消耗的影响。以东经100°定点为例对所给方法进行了仿真验证,数值结果表明:所给策略可有效用于GEO卫星位置保持。     

太阳帆板驱动机构的表面充放电效应研究

空间等离子体环境效应导致的卫星表面充放电是造成卫星在轨工作异常及故障的重要原因之一. 太阳帆板驱动机构（Solar Array Drive Assembly,SADA）是长寿命、大功率卫星电传输环节的关键部件,易成为充放电效应的对象,可使卫星丧失能源,导致整星失效. 为验证空间等离子体环境导致的表面充放电对SADA特别是其功率传输可靠性和安全性的影响,利用等离子体环境模拟试验装置,模拟地球同步轨道（Geostationary Orbit,GEO）等离子体环境,针对SADA进行试验研究. 结果表明,使用两种不同绝缘材料的SADA在空间等离子体模拟环境下表现没有明显区别,表面充放电未对设计合理的SADA正常工作造成明显影响. 研究结果对未来GEO轨道SADA等空间机构的可靠性和安全性设计具有一定指导意义.      

采用简单太阳翼指向控制的IGSO星座设计

在对以地球静止轨道（GEO）卫星为基础的全球覆盖通信星座的设计中,提出一种特殊的倾斜地球同步轨道（IGSO）星座,该星座中的卫星可采用与GEO卫星相同的太阳翼对日指向策略,避免了IGSO卫星为实现太阳翼对日指向采用偏航控制而引起的卫星设计复杂性和研制成本的增加。采用网格法对该星座的覆盖特性进行分析计算,结果表明这种IGSO星座可应用于单重覆盖或极区覆盖的任务,而3颗IGSO与3颗GEO卫星共同使用时可实现95%以上的全球通信覆盖率。     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.     

基于单站CCD漂移扫描光电设备的同步轨道目标测定轨

地基光电观测在同步轨道目标监测领域具有重要作用.为评估单站光电设备对同步轨道目标的实际测定轨能力,利用上海天文台佘山站1.56m望远镜,采用CCD漂移扫描光电技术,对3颗北斗同步卫星开展试验观测,基于卫星精密星历评估目标的测定轨外符精度.结果表明:同步轨道目标的天文定位在方位和俯仰方向上的外符精度均好于0.3";在单圈次观测情况下,尽管轨道预报精度较低,约为数千米量级,但是观测弧段内定轨精度可优于百米;在多圈次观测情况下,轨道改进效果显著,定轨精度优于50m,外推至4d的轨道预报精度为百米量级.此外,定量评估了每晚不同观测时间跨度下同步轨道目标的测定轨精度,为单站光电设备实际应用提供了参考.      

北斗GEO卫星CEI相时延解算方法研究

连线端站干涉测量(connected element interferometry，CEI)是高精度测角技术，在中高轨卫星、月球及深空航天器定轨定位中有良好的应用前景。基于CEI技术特点，提出了一种新的测量方法，即在相干测距模式下利用测距音和载波信号作为信号源进行连线端站干涉测量。构建了CEI试验系统对北斗GEO卫星进行观测，利用相干测距模式下的下行信号解算群时延、相时延。利用北斗GEO卫星精密星历计算的时延理论值，对北斗GEO卫星CEI群时延和相时延结果进行评估。结果表明，相干测距模式下CEI群时延和相时延残差均值分别为0.47ns、0.08ns，标准差(3σ)分别4.2ns、0.13ns。该项研究验证了相干测距模式下CEI相时延解算的可行性，可为共位地球同步卫星精密相对定位、月球探测器CEI测量提供技术参考。     

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.     

A universal on-orbit servicing system used in the geostationary orbit

The geostationary orbit (GEO), a unique satellite orbit of the human beings, is a very precious orbit resource. However, the continuous increasing of GEO debris makes the GEO orbit more and more crowded. Moreover, the failures of GEO spacecrafts will result in large economic cost and other bad impacts. In this paper, we proposed a space robotic servicing system, and developed key pose (position and orientation) measurement and control algorithm. Firstly, the necessity of orbit service in GEO was analyzed. Then, a servicing concept for GEO non-cooperative targets was presented and a universal space robotic servicing system was designed. The system has a 2-DOF docking mechanism, a 7-DOF redundant manipulator and a set of stereo vision, in addition to the traditional subsystems of a spacecraft. This system can serve most existing satellites in GEO, not requiring specially designed objects for grappling and measuring on the target. The servicing contents include: (a) visual inspecting; (b) target tracking, approaching and docking; (c) ORUs (Orbital Replacement Units) replacement; (d) Malfunctioned mechanism deploying; (e) satellites life extension by taking over its control, or re-orbiting the abandoned satellites. As an example, the servicing mission of a malfunctioned GEO satellite with three severe mechanical failures was designed and simulated. The results showed the validity and flexibility of the proposed system.     

Analysis on navigation accuracy of high orbit spacecraft based on BDS GEO and IGSO satellites

To make up for the insufficiency of earth-based TT&C systems, the use of GNSS technology for high-orbit spacecraft navigation and orbit determination has become a new technology. It is of great value to applying Geosynchronous Earth Orbit (GEO) and Inclined GeoStationary Orbit (IGSO) navigation satellites for supporting the navigation of high-orbit spacecraft since there are three different types of navigation satellites in BeiDou Navigation Satellite System (BDS): Medium Earth Orbit (MEO), GEO and IGSO. This paper conducts simulation experiments based on Two-Line Orbital Element (TLE) data to analyze and demonstrate the role of these satellites in the navigation of high-orbit spacecraft. Firstly, the spacecraft in GEO was used as the target satellite to conduct navigation experiments. Experiments show that for the spacecraft on the GEO orbit, after adding GEO and IGSO respectively on the basis of receiving MEO navigation satellite signals, the accuracies were improved by 7.22 % and 6.06 % respectively. When adding both GEO and IGSO navigation satellites at the same time, the accuracy can reach 16 m. In the second place, navigation and positioning experiments were carried out on three high elliptical orbit (HEO) satellites with different semimajor axis (32037.2 km, 42385.9 km, 67509.6 km). The experiments show that the number of visible satellites has been improved significantly after adding GEO and IGSO navigation satellites at the same time. The visible satellites in these three orbits were improved by 32.84 %, 41.12 % and 37.68 %, respectively compared with only observing MEO satellites.The RMS values of the navigation positioning errors of these three orbits are 25.59 m, 87.58 m and 712.48 m, respectively.     

WAAS卫星播发电文一致性分析

星基增强系统(SBAS)是在传统GNSS的基础上为了进一步满足民航用户对卫星导航系统越来越高的精度、完好性、连续性和可用性需求而应运而生.目前全球已建立起了多个SBAS系统,其中提供服务时间最长的是美国的WAAS系统.WAAS系统包括38个参考站、3个主控站、6个上注站和3颗GEO卫星,每个参考站配备3套独立的监测接收...