临近空间无人飞行器多余度容错导航系统设计

临近空间无人飞行器导航系统的故障直接影响到飞行器的任务执行和飞行安全,因此必须能够长时间地保持稳定性和精确性,为达到此目的必须设计由惯性导航、卫星导航等多种导航传感器组成的多源多余度容错导航系统,提高系统的可靠性。针对临近空间飞行器制导控制对导航信息的需求,提出了一种标准的三余度导航系统架构,并设计了采用新型加权平均表决子算法,具备故障检测和隔离以及故障重构功能的容错重构算法,构建了适用于临近空间无人飞行器的多余度容错导航系统,通过实测试验数据仿真验证了容错导航系统的性能,展示了系统一次故障工作的故障容错能力。所研究内容也可被其他类型的无人飞行器借鉴和参考。     

航空发动机控制律容错重组设计

针对发动机数字电子控制系统中传感器易于出现故障的特点,以某型发动机为例,采用基于控制律容错重组方法在飞行包线内的不同点上设计出了发动机容错控制器。仿真结果表明：该控制器具有很好的容错能力,故障情况下系统的动态品质与正常情况下系统的动态品质具有良好的一致性。     

Future architecture of flight control systems

The development of fault tolerant embedded control systems such as flight control systems (FCS) are currently highly specialized and time-consuming. We introduce a conceptual architecture for the next decade control system where all control and logic are distributed to a number of computer nodes locally linked to actuators and connected via a communication network. In this way, we substantially reduce the life-cycle cost of embedded systems and attain scalable fault tolerance. All fault tolerance is based on redundancy. Our philosophy is to cover permanent faults with hardware replication and handle all error processing caused by both permanent and transient faults with software techniques. With intelligent nodes and use of inherent redundancy we introduce a robust and simple fault tolerant system that utilizes minimum hardware and has bandwidth requirements of less than 300 kbits/s, which can be met with an electrical bus. The study is based on an FCS for JAS 39 Gripen, a multi-role combat aircraft that is statically unstable at subsonic speed.     

基于FPGA内置RAM的抗辐射有限状态机设计

在现代卫星设计中广泛使用的可重构现场可编程门阵列(FPGA),在空间高能粒子的影响下很容易产生单粒子翻转(SEU),从而功能紊乱甚至失效。在面向航天应用的FPGA设计中,必须采用容错设计技术来弥补器件本身抗辐射能力的不足。本文首先分析了有限状态机(FSM)的内部结构,并指出由于自身电路结构的特点,传统的FPGA容错设计方法应用于FSM时有一定的局限性。然后,针对基于FPGA的FSM容错设计技术进行了研究,根据现代FPGA的结构特点,提出了一种基于FPGA内置双端口随机存取存储器(RAM)、具有周期校验功能的FSM设计方案。经过可靠性分析和实验可以看出,与采用传统容错设计方法的FSM相比,采用本文方案构建的FSM在太空辐射环境下具有更高的长期可靠性、更小的FPGA资源占用量和更低的功耗。     

容错航空蓄电池电源及其均衡管理

航空蓄电池在实际使用中会出现电池性能衰退与退化速率不一致,电池组容量与使用寿命降低,甚至可能出现严重的安全事故。针对电池单体不一致性和故障隔离问题,提出一种蓄电池电源系统容错体系结构和分级容错控制策略,提出基于电池单体动态重构的主动均衡管理新方法,设计基于"冒泡沉底（BS）择优上岗"的电池单体实时动态重构策略。开发容错航空镍镉电池电源原理样机,给出系统实验性能分析,实验结果表明所提出的系统技术方案可行有效,能够快速隔离故障失效电池单体,明显改善电池不一致性,提高了电池组容量利用率和剩余使用寿命。     

Integrated active fault-tolerant control using IMM approach

An integrated fault detection, diagnosis, and reconfigurable control scheme based on interacting multiple model (IMM) approach is proposed. Fault detection and diagnosis (FDD) is carried out using an IMM estimator. An eigenstructure assignment (EA) technique is used for reconfigurable feedback control law design. To achieve steady-state tracking, reconfigurable feedforward controllers are also synthesized using input weighting approach. The developed scheme can deal with not only actuator and sensor faults, but also failures in, system components. To achieve fast and reliable fault detection, diagnosis, and controller reconfiguration, new fault diagnosis and controller reconfiguration mechanisms have been developed by a suitable combination of the information provided by the mode probabilities from the IMM algorithm and an index related to the closed-loop system performance. The proposed approach is evaluated using an aircraft example, and excellent results have been obtained     

A self-healing strategy with fault-cell reutilization of bio-inspired hardware

The self-healing strategy is a key component in designing the bio-inspired embryonics circuit with the structure of cell arrays. However, the existing self-healing strategies of embryonics circuits mainly focus on permanent faults inside the modules of cells such as the function module and the configuration register, while little attention is paid to transient faults. From the point of view of obtaining high efficiency of hardware utilization, it would be a huge waste of hardware resources by permanent elimination when a cell only suffers a transient fault which can be repaired by a configuration mechanism. A new self-healing strategy, the Fault-Cell Reutilization Self-healing Strategy(FCRSS) which presents a method for reusing transient fault cells, is proposed in this paper. The circuit structures of all the modules in the cells are described in detail. In the new strategy, two processes of elimination and reconfiguration are combined. Within the process of fault-cell elimination, cells with transient faults in the embryonics circuit array could be reused simultaneously to replace the functions of the cells on their left side in the same row. Therefore, transient fault-cells in a transparent state can be reconfigured to realize the fault-cell reutilization. Finally,a circuit simulation, resource consumption, a reliability analysis and a detailed normalization analysis are presented. The FCRSS can improve the hardware utilization rate and system reliability at the expense of a small amount of hardware resources and reconfiguration time. Following the conclusion, the method of determining the optimal self-healing strategy is presented according to the environmental conditions.     

综合化飞行器管理计算机技术研究

目前国外新一代飞机的设计中,为进一步提高飞机的性能,同时降低系统费用,采用飞行器管理系统综合管理包括飞行控制、发动机控制、机电公共设备管理等飞机平台的功能.飞行器管理系统核心是飞行器管理计算机,细粒度可配置飞行器管理计算机不同于以往基于通道容错的计算机系统,它是基于模块级容错的计算机系统,细粒度可配置飞行器管理计算机设计利用综合化技术,通过采用通用的、标准的模块,提高系统的可靠性和可用性.它既要具有飞行控制系统的多余度安全,同时又需要满足发动机控制、机电管理等不同系统、不同余度配置的安全要求.另一方面飞行器管理计算机从系统结构、容错技术等方面要适应不断变化的微电子技术和计算机技术的发展,保持飞机平台具有相对的稳定性,更要具有灵活的系统配置能力.主要介绍了细粒度可配置飞行器管理计算机体系结构、软件要求、容错结构的实现.     

航空发动机内置式永磁容错发电系统的研究

针对内置式航空发电系统高功率密度、高可靠性和高输出性能的要求,提出了基于三相四桥臂的航空用永磁容错发电系统。利用永磁容错电机大电感的特点,改进了传统弱磁控制算法,提出了简单高效的直轴电流I_d解析法弱磁控制,通过实时计算弱磁电流给定实现了宽速范围（3倍额定转速）内的恒压发电控制。同时,根据容错电机磁隔离的特点,以保证故障前后电机定子磁场为圆形旋转磁场为前提,结合电压空间矢量脉宽调制（SVPWM）算法实现了单相断路或短路故障的容错发电控制。通过MATLAB仿真验证了控制算法的正确性。最后,对一套7.5 kW永磁容错发电系统进行了算法验证实验,验证了I_d解析法弱磁控制和容错控制的可行性,为后续的系统性能测试打下基础。     

电力作动器用高可靠性永磁容错电机控制系统的设计及其试验分析

针对电力作动器的高可靠性要求,结合转子磁钢采用离心结构的六相十极永磁容错电机(FTPMM),提出一种基于电流直接控制法的容错控制系统。当电机绕组或功率管发生断路及短路故障时,系统无需硬件故障辨识信号及软件算法切换就可实现系统的强容错功能,即故障后电机输出转速不变,输出功率与发生故障的相数有关,当电机系统出现一相、两相、三相故障时,电机分别可输出100%、80%、60%的额定功率;设计了一台750 W六相十极永磁容错电机的原理样机及其全数字化控制器,证明了该容错控制策略的正确性及整个电机控制系统的强容错性及可行性。     

电力作动器用高可靠性永磁容错电机控制系统的设计及其试验分析

 针对电力作动器的高可靠性要求,结合转子磁钢采用离心结构的六相十极永磁容错电机(FTPMM),提出一种基于电流直接控制法的容错控制系统。当电机绕组或功率管发生断路及短路故障时,系统无需硬件故障辨识信号及软件算法切换就可实现系统的强容错功能,即故障后电机输出转速不变,输出功率与发生故障的相数有关,当电机系统出现一相、两相、三相故障时,电机分别可输出100%、80%、60%的额定功率;设计了一台750 W六相十极永磁容错电机的原理样机及其全数字化控制器,证明了该容错控制策略的正确性及整个电机控制系统的强容错性及可行性。     

航空发动机主供油计量活门故障主动容错控制器设计

针对航空发动机主供油计量活门执行机构发生故障时,系统的输出将会发生跳变,不能很好地跟踪系统期望输出的现象,采用模型参考自适应方法设计了主动容错控制器来解决这一问题.首先针对执行机构故障问题进行了数学描述.其次,选取系统的标称模型为参考模型,以输出误差最小化为优化目标,基于李雅普诺夫稳定性原理,寻找合适的自适应调节律,设计了自适应容错控制器.最后,针对发动机某一工况点进行了不同故障情况下的数值仿真.仿真结果表明:在主供油计量活门发生跳变故障和卡死故障时,自适应容错控制器可以通过参数自动调节,使得系统的输出能够很好地跟踪模型的输出,跟踪误差最终逼近于零.      

一种新型高效容错体系结构的研究与实现

由于辐射而在电路的时序逻辑部分和组合逻辑部分产生的逻辑软错误已经逐渐成为阻碍系统可靠性和稳定性的主要威胁。提出了一种结合了基于主／g．1atch设计和改进的时间冗余策略两种技术的容错体系结构,通过ISCAS’89测试基准电路进行验证并对实验结果的分析发现,该容错体系结构获得了很高的容错性能。     

基于非对称SVPWM的电动汽车五相永磁无刷电机容错控制

针对电动汽车用五相永磁无刷电机单相开路故障,提出了一种基于非对称空间矢量脉宽调制策略的故障容错控制方案。新型故障容错控制的设计分为两个部分,对五相永磁无刷电机驱动系统开路故障下的电压矢量关系进行了分析,然后对空间矢量调制算法进行改进,即在一个扇区中选择构成不对称波形的开关状态作为输出。该非对称空间矢量调制可以降低非故障相的电流谐波和降低转矩脉动。基于试验平台开展了试验研究,试验结果验证了新型容错控制可实现系统故障期间的低转矩脉动,且保持较好的动态性能。     

基于冷备份多模冗余结构的BRAM自修复方法

随着现场可编程门阵列（FPGA）在空天电子系统中的广泛应用,受空间辐射恶劣环境影响,FPGA中重要的存储器电路BRAM,因采用SRAM技术极易发生位翻转故障,虽绝大部分情况表现为瞬时故障,但永久故障依然存在。针对BRAM自修复方法仅修复瞬时故障的现状,对能同时修复瞬时故障和永久故障的自修复方法进行研究,提出了一种冷备份多模冗余结构,用3个热备份模块和1个冷备份模块来构造BRAM,该结构可通过三模冗余刷新方法修复瞬时故障和冷备份替换方法修复永久故障。给出了整个BRAM自修复系统中各模块的电路结构和实现方法,实验验证了系统的自修复能力,并在可靠性、硬件资源和时间消耗3个方面,通过对比分析论证了自修复方法的有效性。     

Real time recovery of fault tolerant processing elements

A critical problem in the design of ultra-reliable fault tolerant systems is that of how to bring a redundant member back on-line, after a transient fault, without degrading critical real-time functions. Recovery from transients is imperative to maintain necessary system reliability in the face of transient errors which have been estimated to occur at a rate of 5 to 100 times that of permanent failures. Excessive delays associated with recovery become a problem when as much as 1 Mbytes of RAM in the faulty processor must be made congruent with the processing majority while maintaining full functionality of critical, real-time control algorithms. This paper describes a hardware assisted recovery technique which uses memory “tags” to determine which memory segments need to be restored such that recovery can be performed incrementally without affecting real-time operational tasks. Also presented is performance data associated with this technique's application to a Draper Laboratory quad-redundant processor responsible for vehicle control of a manned undersea vehicle     

面向雷达天线平台的容错纠错策略及其FPGA实现

 针对雷达天线平台可能出现的传感器故障,提出了一种容错纠错策略。如果雷达天线平台周围的3条驱动腿中的某一个传感器发生故障,则可根据空间闭链机构约束,由其他正常工作驱动腿的传感器和中间从动腿的冗余传感器的测量值计算出故障传感器的应测值。推导了对应的位移传感器故障的容错重构算法,研究了基于现场可编程门阵列（FPGA）的上述容错策略的硬件实现方法。通过引入坐标旋转数字计算（CORDIC）算法使得FPGA运算中只需进行基本的移位和加/减操作;设计了基于FPGA的循环高速流水线处理器结构,使得重构算法的在线计算速度大大提高。仿真模拟了突变型传感器故障,结果表明,所提容错纠错方案能有效地保证雷达天线平台运行的安全性和可靠性。     

重构控制律的容错控制

本文针对单输入单输出的多回路系统提出了一种简单可行的容错控制方法。当控制系统中任一传感器失效时 ,对该传感器的邻近回路采用重构控制律的方法加以补偿 ,不仅使系统仍能稳定且控制质量与传感器失效前相一致。本方法既适合于最小相位系统也适合于非最小小相位系统。数字仿真结果表明本方法可行。     

Research on a six-phase permanent magnet synchronous motor system at dual-redundant and fault tolerant modes in aviation application

With the development of more/all electrical aircraft technology,an electro-mechanical actuator (EMA) is more and more used in an aircraft actuation system.The motor system,as the crucial part of an EMA,usually adopts the redundancy technology or fault tolerance technology to improve the reliability.To compare the performances of these two motor systems,a 10-pole/ 12-slot six-phase permanent magnet synchronous motor (PMSM) is designed with the concentrated single-layer winding,which is able to operate at dual-redundant and fault tolerant modes.Furthermore,the position servo performances of the six-phase PMSM at dual-redundant and fault tolerant modes are analyzed,including the normal and fault conditions.In addition,a variable structure proportional-integral-derivative (PID) control strategy is proposed to solve the performance degradation problem caused by phase current saturation.Simulation and experimental results show that the fault tolerant PMSM has a better position servo performance than the dual-redundant PMSM,and the variable structure PID control strategy is able to improve the performance due to phase current saturation.     

军用飞机无维修工作期参数分解方法研究

 针对目前军用飞机设计中无维修工作期(Maintenance-free Operating Periods, MFOP)指标无法分解和落实的问题,通过对基本可靠性、故障预测、系统重构和冗余设计等影响军用飞机MFOP实现的主要因素进行分析和数理建模,提出了一种军用飞机MFOP参数的分解流程和方法,为MFOP由使用参数(使用要求)向合同参数(设计要求)的分解提供初步的方法基础,能够为军用飞机的MFOP指标分析论证和基于MFOP的飞机可靠性设计工作提供一定的理论指导.