民机高速风洞试验的阻力雷诺数效应修正

在飞机设计阶段,获得准确的气动特性数据对设计者是十分重要的,采用缩比模型的风洞试验是主要途径之一。但是风洞条件限制了试验的Re数,从而影响了对跨音速巡航阻力的评估,因此需要对风洞试验结果的阻力进行Re数效应修正。分析了风洞试验结果阻力的误差构成,提出了Re数效应修正的风洞试验数据基础;进一步就跨音速巡航阻力的构成进行分析,论述了对最小阻力和升致阻力分项修正的方法,并对修正结果进行了验证,得到了一种可靠的工程方法。     

高超声速湍流分离激波运动特性

给出半圆柱前缘舵诱导的高超声速湍流分离激波运动特性。实验气流Ｍ数为７．８,单位长度Ｒｅ为３．５＊１０＾７／ｍ。     

直方管内充分发展湍流的大涡模拟 第一部分

本文用大涡模拟的方法对直方管内Ｒｅ＝４．９×１０￣４的充分发展湍流运动进行数值模拟，所得结果清楚地显示了二次流的存在。统计平均量的数值结果也与实验结果吻合甚好，这表明大涡模拟是高雷诺数复杂湍流运动数值模拟的一个有效手段。     

直方管内充分发展湍流的大涡模拟 第二部分

本文第一部分用大涡模拟的方法对直方管内Ｒｅ＝４．９×１０￣４的充分发展湍流运动进行了数值模拟。所得结果证实大涡模拟是高雷诺数复杂湍流运动数值模拟的一个有效手段。在本文第二部分用所得的数据库对湍流运动的结构和形态进行了分析，并且用流体质点运动图形显示了湍流运动的二次流。     

高超声速进气道内激波－边界层干扰研究

为了研究高超声速进气道内激波干扰和流场结构，对一个二维进气道模型在中国空气动力研究与发展中心超高速所风洞流场中进行了实验（Ｍ＿∞＝５．０，Ｒｅ＿∞＝７．５×１０￣６ｍ￣（－１））。采用纹影方法，结合压力测量对进气道内流结构进行诊断，同时用Ｙｅｅ的ＴＶＤ有限差分格式通过求解二维Ｎ─Ｓ方程对相应实验状态下的进气道内流场进行了数值模拟。风洞实验与数值模拟取得了较好的一致。进一步的分析还表明高超声速进气道内的激波─边界层干扰对进气道性能有很大的影响。     

尖前缘翼干扰区的壁面压力和热流率分布

本文给出Ｍ＿∞＝７．８和６．７２，Ｒｅ＝３．５×１０￣７／ｍ和５．４×１０￣７／ｍ气流绕迎角为２０°、３０°和３５°尖前缘翼运动时，平板锥型干扰区的壁面压力和热流率分布。结果表明：（１）平板锥型干扰区的特征几何尺度与无粘激波角β＿０和翼迎角α相关，而壁面压力和热流率的峰值与法向马赫数Ｍ＿ｎ相关。（２）翼面压力和热流率分布由于受拐角涡影响，前者在翼根部呈波谷状，而后者呈波峰状，影响尺度与翼前缘处来流边界层厚度有关。     

跨音速二元槽壁风洞中绕翼型流动的有限差分计算

1.引言 风洞中实验数据的测量受到多种因素的影响,其中首要的是洞壁干扰影响,而在跨音速区尤为严重。采用两壁或四壁通气的跨音速风洞可使干扰影响大为减轻,但M数较高时不论从理论或实验上研究洞壁干扰都是相当困难的。 经典的洞壁干扰理论是以考虑压缩性影响的线化亚音速理论为基础的,但当翼面上     

跨音速翼型多参数多约束优化设计方法

本文通过采用EXTREM数值优化方法并基于求解全速势方程的跨音速粘流翼型计算方法, 研究发展了一种应用形状函数修形的跨音速翼型多参数多约束数值优化设计方法, 应用该方法可以从普通低速翼型和超临界翼型出发通过数值优化后得到在跨音速区阻力系数最小化的翼型几何外形。设计表明, 该方法具有收敛快、调用目标函数次数少等优点。      

跨音速机翼的方案设计方法

阐述了跨音速机翼的方案设计方法，文中所描述的研究是开发该技术用于方案设计，建立并存取跨音速气动力数据库的第一步，该研究的主导思想是开发一种可以进行非线性气流数据叠加的方法，用轻型公务机的实际设计对该方法进行了测试。     

动态网格快速生成及组合体跨音速非定常气动力计算

采用代数方法、局部变形技术及快速动态弹性变形技术生成三维翼/体组合的贴体动态网格。用时间精确近似因式分解差分方法求解守恒型非定常全位势方程。考虑附面层影响，通过粘/位迭代得到跨音速翼/体的非定常气动力。所得结果与实验数据相比相当吻合。     

基于飞机油箱模型形状特征油量测量切片步长选择方法研究

 在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明：该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

二维翼段颤振的μ控制

 采用超声电机作为作动器来实现含控制面的翼段颤振鲁棒抑制。针对作者设计的二维翼段颤振主动抑制系统，通过理论与实验相结合的方法，建立了考虑沉浮方向阻尼和作动器模型参数不确定性的控制系统模型，设计了μ控制器，并对控制器做了降阶处理。数值仿真和风洞试验表明，μ控制器可有效地抑制颤振的发生，将颤振临界速度提高23.4%。相对于H_∞控制器，μ控制器的控制效果和鲁棒性更好。     

Abnormal Shape Mould Winding

为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。     

基于H∞性能指标的质量矩拦截弹鲁棒控制

 以所建立的质量矩拦截弹数学模型为基础，利用微分几何的反馈线性化理论，得到一个解耦线性系统，考虑到拦截弹的鲁棒性要求和3个滑块的协调控制问题，提出采用双回路的设计方法，内回路采用线性二次调节器（LQR），外回路采用考虑混合灵敏度问题的H_∞控制设计。仿真结果证明了该方法动态性能满足设计要求，同时对系统参数的不确定性具有较强的鲁棒性。     

航天器返回地球的气动特性综述

航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.