共查询到20条相似文献,搜索用时 890 毫秒
1.
飞机维修(护)质量关系到飞机的飞行安全。本文阐述了飞机维修(护)工作卡标推化的提出理由、编写原则、使用与管理、应用效果等,为飞机维修(护)提供可靠保证。 相似文献
2.
飞机健康管理(AHM)是飞机设计和维修领域正在兴起的研究课题,属于飞机维修的新理念和新技术。波音的AHM是一套以信息驱动的系统,其目的是通过对飞机系统当前产生数据的智能分析,确定飞机目前状态和未来的适用性,帮助航空公司实现主动维护管理。 相似文献
3.
一、概 述 波音737-300飞机是84年投入航线的中短程运输机,它所安装的飞行管理计算机系统(FMCS)是737-300飞机数字式航空电子综合系统飞行管理系统(FMS)的主要分系统之一,除了FMOS以外,737-300飞机中FMS包括的主要分系统还有: △自动驾驶/飞行指引系统(AFDS), △自动油门系统(A/T), 相似文献
4.
5.
GAMECO(广州飞机维修工程有限公司)是合资企业,它是在原广州飞机维修厂的基础上建立起来的,1989年10月开始营运。通过合资,引进了外资,引进了技术,引进了管理,使企 相似文献
6.
介绍了北京飞机维修工程有限公司(Ameco)工程处工时管理系统的研究和开发,分析了飞机维修工程工作中隐藏的问题,提出了优化流程和解决问题的方案,以提高工程部门的工作效率、减少飞机停场时间、增加企业利润。 相似文献
7.
飞机是航空公司运输的主要工具,而根据运输对象的不同,民航运输机主要分为客机和货机两种。运营哪种类型的飞机则取决于航空公司的类型和运输的用途。就民航企业而言,一般多以客为主,货为辅。所以,按此定位各航空公司多引进、使用客机。(或准确地说叫做客货机———主要的空间及业载供客舱使用,仅利用飞机的腹舱(货舱)顺带货物、邮件及行李)正因为腹舱是大多数航空公司货物运输的主要渠道,所以有必要对客机腹舱的合理利用作如下讨论:1腹舱利用的重要性利用飞机腹舱的重要性在于:(1)如前所述,大多数航空公司都是以客机为主,所以客机的腹舱是… 相似文献
8.
9.
飞机是由各大部件(机头、机身、机翼等)和机载设备(发动机、油箱、电台等)组成,每架飞机有一定的使用寿命.而飞机中各机载设备自身的使用寿命却各不相同。本文介绍如何应用信息系统对飞机机载设备使用寿命进行动态管理.以便及时更换到期的机载设备。 相似文献
10.
根据空中客车公司的 A300—600飞机维护大纲(Maintenance Planning Document)的规定,对 A300—600飞机需要进行结构抽样检查,以便发现可能存在的疲劳损伤、环境造成的退化和偶然性的损伤,从而为用户整个机群的结构检查提供有价值的分析和研究数据。结构抽样检查只在所抽样的飞机上完成,共分为两类:一类称为 FLP(Fleet Leader Program),即机群领头飞机计划;另一类称为 AEP(Age Exploration Program),即老龄飞机暴露计划。FLP 和 AEP 计划是在相应的抽样飞机上完成一系列 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:2,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
14.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
15.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
16.
17.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
18.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
19.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
20.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献