微型涡轮发动机综合测控系统设计

针对微型涡轮发动机测控要求,设计了集试车、控制系统半物理模拟、电动供油试验功能于一体的综合测控系统.各传感器调理信号并接到测控计算机与电子控制器;电子控制器通过串口接受测控计算机操纵指令,并采集p₂进行转速间接闭环控制.详细介绍了转速测量方法、电动油泵(pulse width modulation,PWM)驱动设计,并分析、设计了发动机控制律.测试软件以Lab Windows/CVI为平台,采用多线程技术设计.应用表明,系统结构简单、试验效率高,可为同类发动机研发提供支持.      

车载GPS复合定位系统仿真研究

研究了基于ＧＰＳ的复合定位车载系统仿真方法,建立了车辆移动轨迹发生器、移动轨迹测量和各种敏感器模型,通过计算机仿真,可以进行室内“模拟跑车”试验,从而为设计系统所关心的问题如总体定位精度等的研究提供了一个模拟试验平台。     

Temporally staggered sensors in multi-sensor target tracking systems

For a multi-sensor target tracking system, the effects of temporally staggered sensors on system performance are investigated and compared with those of synchronous sensors. To capture system performance over time, a new metric, the average estimation error variance (AEV), is proposed. For a system that has N sensors with equal measurement noise variance, numerical results show that the optimal staggering pattern is to use N uniformly staggered sensors. We have also shown analytically that the AEV of the system with N uniformly staggered sensors is always smaller than that of the system with N synchronous sensors. For sensors with different measurement noise variances, the optimal staggering pattern can be found numerically. Practical guidelines on selecting the optimal staggering pattern have been presented for different target tracking scenarios. Due to its simplicity, uniform staggering can be used as an alternative scheme with relatively small performance degradation.     

基于电磁波三维结构向量的飞行器姿态估计

以电磁波三维空间结构向量为参照的飞行器姿态/航向测量研究，可弥补空间参照物缺乏，丰富空间飞行器姿态/航向测量工具。本文根据各缺损电磁矢量传感器姿态位置与接收信号之间的变化规律，建立飞行器载电磁矢量传感器阵列导向矢量。根据协同导航的多个信号空间谱和最大化，实现平台姿态/航向测量。飞行器多位置的多个传感器共同测量姿态可避免遮挡，获得更高姿态精度的同时拓展了系统的适用领域。接收电磁信息完备状态下，不需导航信号，测绘平稳的杂波就能作为姿态基准。仿真试验验证了姿态估计的有效性。     

Design and implementation of a sensorless switched reluctance drivesystem

This paper presents a new sensorless switched reluctance drive system. The drive system can perform well when the system is operated in the pulse-width modulated (PWM) region. By suitably shaping an induced voltage in an inactive phase which is adjacent to an energized phase of a switched reluctance motor (SRM), the shaft position of the rotor can be easily obtained. As a result, the position sensor can be eliminated. First, the theoretical analysis of the proposed method is presented. By systematic theoretical analysis, a voltage signal which can easily estimate the shaft position of the motor is derived. This signal is only related to the input dc voltage of the converter, and the self and mutual inductances of the motor. Then, a new method to measure the self and mutual inductances of the SRM is proposed. After that, the design for a simple circuit which can synthesize the required voltage signal for rotor position estimation is presented. Next, how a 32-bit microprocessor system is used to execute the position and speed estimation, speed-loop control, and current-commands generation is shown. A closed-loop drive system is thus achieved. Several simulated and experimental results validate the theoretical analysis. A new direction in the design and implementation of a sensorless switched reluctance drive system is presented     

Performance evaluation of track fusion with information matrixfilter

In a multisensor environment, each sensor detects multiple targets and creates corresponding tracks. Fusion of tracks from these, possibly dissimilar, sensors yields more accurate kinematic and attribute information regarding the target. Two methodologies have been employed for such purpose, which are: measurement fusion and state vector fusion. It is well known that the measurement fusion approach is optimal but computationally inefficient and the state vector fusion algorithms are more efficient but suboptimal, in general. This is so because the state vector estimates to be fused obtained from two sensors, are not conditionally independent in general due to the common process noise from the target being tracked. It is to be noted that there are three approaches to state vector fusion, which are: weighted covariance, information matrix, and pseudomeasurement. This research is restricted solely to performance evaluation of the information matrix form of state vector fusion. Closed-form analytical solution of steady state fused covariance has been derived as a measure of performance using this approach. Note that the results are derived under the assumptions that the two sensors are synchronized and no misassociation or merged measurement is considered in the study. Results are compared with those using Monte Carlo simulation, which was used in the past to predict fusion system performance by various authors. These results provide additional insight into the mechanism of track fusion and greatly simplify evaluation of fusion performance. In addition, availability of such a solution facilitates the trade-off studies for designing fusion systems under various operating conditions     

光纤图像观测系统在燃烧实验中的应用

阐述了光导纤维图像观测系统的工作原理、主要部件及功能。利用该系统观测燃烧室内部不同工作状态下的火焰状况,对所记录下来的火焰图像进行了较为详细的分析,并对实验过程中出现的一些问题提出了改进措施。     

An improved quaternion Gauss–Newton algorithm for attitude determination using magnetometer and accelerometer

For the vector attitude determination, the traditional optimal algorithms which are based on quaternion estimator(QUEST) measurement noise model are complicated for just two observations. In our application, the magnetometer and accelerometer are not two comparable kinds of sensors and both are not small field-of-view sensors as well. So in this paper a new unit measurement model is derived. According to the Wahba problem, the optimal weights for each measurement are obtained by the error variance researches. Then an improved quaternion Gauss–Newton method is presented and adopted to acquire attitude. Eventually, simulation results and experimental validation employed to test the proposed method demonstrate the usefulness of the improved algorithm.     

风洞模型-支撑系统涡激振动测量与分析

以0.55m×0.4m低湍流航空声学风洞某模型及其支撑系统为研究对象,采用基于加速度传感器直接测量支撑系统和热线间接测量模型尾流相结合的方法,测量并分析了风洞模型-支撑系统的涡激振动模态,给出了测量方案和数据处理方法。采用基于加速度传感器的功率谱分析方法,获得了模型-支撑系统的三阶振动频率分别为31.1、120.9和221.4Hz;采用基于加速度传感器的频域滤波和频域积分方法,提高了有效信号的信噪比,获得了模型-支撑系统振动的振型和振动节点位置;采用热线测量模型尾流分离涡脱落频率的方法,获得了模型一阶和二阶振动的尾流涡激频率分别为31.1和124.1Hz,并从测量尾流速度脉动量获得了模型振幅变化和抖振边界信息。实验结果表明,采用热线测量模型尾流从而分析模型振动的方法,有利于小尺度的模型振动测量,而且相对于加速度传感器装于模型表面的直接测量方法而言,对试验模型的绕流流场干扰较小,为测量风洞试验模型的涡激振动模态提供了一种方法。     

Design and implementation for a digital synchronous reluctancedrive

A systematic controller design for a synchronous reluctance drive system is presented. This controller consists of two parts: a forward-loop H^∞ controller to improve the transient response, and a load compensator to reduce the load disturbance. Based on a simplified model of the drive system, a control algorithm has been derived. Detailed analysis of the characteristics of the closed-loop system is presented. The effects of the parameter variations are also studied. A digital signal processor, TMS-320-C30, is used to implement the control algorithm. Both the speed control and the position control of the drive system can be implemented by using the proposed control method. Furthermore, all the control loops are executed by the digital signal processor. The system, as a result, is very flexible. The whole drive system performs well although its hardware is very simple. For speed control, the system can be operated at a speed as low as 1 r/min. For position control, the system can accurately control a one-axis table. In addition, the system also has good position tracking ability. Several experimental waveforms validate the simulated results     

Adaptive sliding mode control for limit protection of aircraft engines

In practice, some sensors of aircraft engines naturally fail to obtain an acceptable measurement for control propose, which will severely degrade the system performance and even deactivate the limit protection function. This paper proposes an adaptive strategy for the limit protection task under unreliable measurement. With the help of a nominal system, an online estimator with gradient adaption law and low-pass filter is devised to evaluate output uncertainty. Based on the estimation result, a sliding mode controller is designed by defining a sliding surface and deriving a control law. Using Lyapunov theorem, the stability of the online estimator and the closed-loop system is detailedly proven. Simulations based on a reliable turbofan model are presented, which verify the stability and effectiveness of the proposed method. Simulation results show that the online estimator can operate against the measurement noise, and the sliding controller can keep relevant outputs within their limits despite slow-response sensors.     

旋转式SINS的自标校技术研究

惯性器件常值及慢变误差是影响捷联惯导系统精度的主要因素之一,所以在捷联惯导系统出厂前需要对常值及慢变误差参数进行标定。但这些误差参数会随时间发生变化,对于高精度捷联惯导系统,每次启动后需要对惯性器件的误差参数进行重新标校。针对光纤惯导系统,建立了IMU误差模型,并根据提出的旋转式捷联惯导系统自标校转位方案原则设计出了一种8位置自标校方案,对惯性器件标定参数进行激励和辨识,并建立了Kalman滤波状态方程及量测方程,对惯导系统误差参数进行在线标定。实验结果表明,该方案对其惯性器件误差参数能进行准确估计,具有一定的参考价值。     

基于DDS驱动PLL结构的X波段雷达信号频率综合器

给出了一种基于DDS驱动PLL的频率综合器结构。该结构采用AD9854DDS芯片产生低频的参考信号,然后驱动锁相环和VCO产生X波段射频信号。实验和测量结果表明,该频率综合器具有较宽的工作带宽和较低的相位噪声,可以用来产生连续波、线性调频信号和频率捷变信号用于X波段雷达信号的仿真。     

STRAIN MEASUREMENT IN THE SMART COMPOSITE

ＳＴＲＡＩＮＭＥＡＳＵＲＥＭＥＮＴＩＮＴＨＥＳＭＡＲＴＣＯＭＰＯＳＩＴＥＬｉａｎｇＤａｋａｉ；ＴａｏＢａｏｑｉ（ＳｅｎｓｏｒｉｎｇａｎｄＴｅｓｔｉｎｇＲｅｓｅａｒｃｈｉｎｓｔｉｔｕｔｅ，ＮａｍｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄ...     

Optimal sensor selection strategy for discrete-time stateestimators

A novel sensor selection strategy is introduced, which can be implemented on-line in time-varying discrete-time system. We consider a case in which several measurement subsystem are available, each of which may be used to drive a state estimation algorithm. However, due to practical implementation constraints (such as the ability of the on-board computer to process the acquired data), only one of these subsystems can actually by utilized at a measurement update. An algorithm is needed, by which the optimal measurement subsystem to be used is selected at each sensor selection epoch. The approach described is based on using the square root V-Lambda information filter as the underlying state estimation algorithm. This algorithm continuously provides its user with the spectral factors of the estimation error covariance matrix, which are used in this work as the basis for an on-line decision procedure by which the optimal measurement strategy is derived. At each sensor selection epoch, a measurement subsystem is selected, which contributes the largest amount of information along the principal state space direction associated with the largest current estimation error. A numerical example is presented, which demonstrates the performance of the new algorithm. The state estimation problem is solved for a third-order time-varying system equipped with three measurement subsystem, only one of which can be used at a measurement update. It is shown that the optimal measurement strategy algorithm enhances the estimator by substantially reducing the maximal estimation error     

IDENTIFICATION OF GYRO DRIFTS UNDER THREE AXIS ATTITUDE COUPLING

ＩＤＥＮＴＩＦＩＣＡＴＩＯＮＯＦＧＹＲＯＤＲＩＦＴＳＵＮＤＥＲＴＨＲＥＥＡＸＩＳＡＴＴＩＴＵＤＥＣＯＵＰＬＩＮＧＪＩＮＧＷｕｘｉｎｇ（荆武兴），ＷＡＮＧＸｕｅｘｉａｏ（王学孝），ＷＵＹａｏｈｕａ（吴瑶华）（ＨａｒｂｉｎＩｎｓｔｉｔｕｔｅｏｆＴｅｃｈｎ...     

基于压缩感知的整体叶盘多模态振动叶尖定时信号重构方法

叶尖定时测量技术是近年来发展的一种非接触式旋转叶片振动监测方法,具有非入侵性的优点,但是该系统测得的振动信号通常是欠采样的。为了能够重构叶尖定时欠采样信号,本文根据压缩感知理论以及叶尖定时采样原理引入了叶尖同步振动信号稀疏模型以及叶尖振动信号重构方法。对整体叶盘有限元模型进行瞬态分析得到叶尖振动信号,使用优化的正交匹配追踪算法以及基追踪对欠采样信号进行重构并和传统方法进行对比。计算结果表明：在信噪比为30dB的噪声环境下,限制频域的正交匹配追踪算法(OMP-RFD)可以准确地识别出叶尖振动信号的主要频率成分。最后使用试验所获得的叶尖振动信号进行重构,验证了OMP-RFD算法有效性。综上可知：压缩感知方法可以很好地应用于叶尖定时测量装置中,能够使用较少传感器识别叶尖同步振动欠采样信号参数,有效提高噪声环境下识别高阶频率的成功率以及准确度。     

电机电流分析法在测控天线传动系统故障诊断中的应用

分析了天线传动系统影响电机电流特性的因素，提出了天线正常跟踪卫星以及电机启动、制动时的电流特性标准，利用电机电流分析法对测控天线传动系统的周期性故障、阻尼增大故障以及系统级故障进行定位判断。结果表明，电机电流分析法可以作为天线传动系统故障诊断的一种有效手段。     

A new system identification technique for harmonic decomposition

An extended and unifying system identification technique is presented for a class of systems that include all main signal models that arise in the harmonic decomposition problem. This technique unifies and extends the previously developed system identification techniques which are improvements on the Pisarenko harmonic decomposition (or, its spatial dual, MUSIC) as they arise in arrays of sensors. The advantages of the technique and some of its specializations include having no assumptions of stationarity on the stochastic processes involved. Another contribution of this technique is that it can also be used without any resort to probability theoretic concepts, thus bypassing the approximation of autocorrelations via time averages, yielding the system parameters exactly. This technique can be utilized to determine the dominant modes of vibrations of flexible structures as well. An analogy is established between arrays of sensors for target signal returns and those that can be used for vibrations in flexible structures. This enables the results developed for each one of these problems to be applied to the other     

硅谐振压力微传感器开环测试中的信号处理技术

介绍了自行设计的专用开环测试系统。该系统为一个自动测试系统,可测出谐振梁的幅频和相频特性,而且能成功地测出从拾振电阻获得的若干微伏的微弱信号。开环测试中最重要的问题是所谓的同频干扰。发现通过激励电阻与拾振电阻间的分布电容耦合的激励信号是同频干扰的最终来源。用对称激励技术成功地解决了这一问题。