基于先验知识及其定量评估的自适应杂波抑制研究

 为了改善训练样本数受限的非均匀杂波环境中的系统检测性能,研究了基于先验知识及其定量评估的自适应杂波抑制算法。提出了使用经真实杂波信息白化后的先验杂波协方差矩阵与单位矩阵之差的谱范数,来定量评估杂波先验知识的准确程度,并给出了真实杂波协方差矩阵未知时的矩阵谱范数估计方法。结合先验知识定量评估结果,获得了具有先验知识约束时的杂波协方差矩阵最大似然估计方法。分别基于多脉冲相参雷达以及空时自适应雷达进行了杂波建模,在此基础之上分析了算法性能。仿真结果证实了该算法优于使用样本协方差矩阵及先验杂波信息形成杂波抑制权值的性能。     

基于导航雷达实测数据的CFAR检测算法分析

为提高导航雷达在复杂环境中的目标检测能力,研究了修正中值(MMD)检测器在导航雷达中的应用,并与经典非参量广义符号(GS)检测器和参量最小选择(SO)检测器的检测结果进行对比。仿真结果表明:GS检测器对海上单一目标有较好的检测性能,但是在多目标环境下的检测性能严重下降;SO检测器虽然对上述环境有较好的检测性能,但是由于杂波包络分布类型难以准确已知,杂波抑制能力较差;MMD检测器在多目标环境下有较好的检测性能和杂波抑制能力。     

利用神经网络的海杂波幅度分布参数估计方法

海杂波是制约对海雷达探测性能的主要因素之一,掌握其特性,具有十分重要的意义。经典海杂波统计模型在参数估计方法上以传统统计学理论为基础,在样本数较少的情况下,估计结果往往较差,导致建模准确度下降。此外,在复杂非均匀探测背景下,难以实现海杂波模型参数的准确实时估计。针对该问题,文章将深度神经网络模型引入海杂波参数估计领域,通过构建合理的模型,使其具备海杂波幅度分布模型的高精度参数估计能力。该方法采用直方图统计的方法进行数据预处理,合理划分输入数据标签的分组区间,构建数据集训练神经网络,并利用测试数据得到神经网络估计结果。仿真数据和X波段IPIX雷达实测数据验证结果表明,与传统数理统计估计方法相比,该算法明显提升了海杂波统计模型参数估计精度。     

非高斯杂波下自适应雷达目标检测新方法

在球不变随机向量(SIRV)非高斯杂波背景下,研究了多脉冲相参雷达目标的自适应检测问题。假设杂波具有相同的协方差矩阵结构和可能相关的纹理分量,提出了新的协方差矩阵估计器,并获得了相应的自适应归一化匹配滤波器(ANMF)。理论分析表明,在估计杂波分组大小与实际情况匹配时,所获得的ANMF对杂波功率水平和协方差矩阵结构均具有恒虚警率(CFAR)特性。仿真结果表明:当估计的杂波分组大小失配时,所获得的ANMF具有近似CFAR特性,并进一步分析了不同参数变化对所提检测器性能的影响。与已有的ANMF相比,所获得的ANMF具有更好的检测性能,且迭代次数更小,其相对于已知杂波协方差矩阵的最优归一化匹配滤波器(NMF)的检测损失也更小,具有很好的实际应用前景。     

基于Agent理论的飞机敏感性评估方法

在以信息战为核心的现代战争中,各机种、多平台之间的信息交互成为影响战争结果的关键因素。因此进行飞机敏感性设计时,应当置于信息对抗的环境中并考虑信息交互过程。本文阐述了网络中心战的理论,建立了基于Agent理论的战场模型以及飞机对抗模型,通过对Agent对抗过程中的3个阶段（探测阶段、信息交互阶段、作战阶段）进行建模仿真,研究了预警机探测能力、飞机雷达散射截面（RCS）、信息传输时延和红外电子对抗能力等因素对飞机敏感性的影响,得到了雷达特征参数、飞机RCS与探测概率之间的关系,传输时延与先敌发射概率之间的关系,以及红外干扰弹的最优发射区间,为飞机的敏感性设计提供了一定的依据。     

Lognormal杂波环境中基于Hough变换的目标检测

给出了基于Hough变换的信号检测结构,推导了Lognormal分布杂波背景下基于Hough 变换检测器的检测性能的解析表达式,设计了具体的仿真环境和仿真流程,对基于Hough变换检测器在非起伏目标和四种Swerling起伏环境下的目标检测性能进行了分析。     

雷达探测距离的区间估计

雷达探测距离是雷达发射功率、频率、接收信号功率等这些不确定参数的函数。以区间数学为基础,将这些不确定参数描述为区间变量,借助一阶泰勒级数,提出了近似估计雷达探测距离的区间分析方法。区间分析方法降低了以往处理不确定问题概率方法需要知道不确定参数均值、方差或概率分布密度等详细统计信息的要求,只要求知道不确定信息所在的边界,而且计算量少。通过算例与概率分析方法相比较,表明了区间分析方法的可行性和优越性。     

基于稀疏贝叶斯学习的字典失配杂波空时谱估计方法

杂波谱稀疏恢复空时自适应处理（STAP）是一种有效减少杂波样本数需求的机载雷达杂波抑制方法。然而,空时平面被离散地划分为若干个网格点来构建空时导向矢量字典,当字典在失配时,杂波脊不能准确落在预先离散化的网格点上,稀疏恢复STAP性能严重下降。提出了一种基于稀疏贝叶斯学习的字典失配杂波空时谱估计方法,首先利用二维泰勒级数建立空时动态字典模型,然后将字典失配误差作为待估超参数构建贝叶斯稀疏恢复模型,并利用失配误差估计值对空时导向矢量字典进行修正,最后利用修正后的空时导向矢量字典重构杂波协方差矩阵,进而计算杂波空时谱。实验证明,该方法能够有效提高字典失配情况下的杂波谱稀疏恢复精度,杂波抑制性能优于已有字典预先离散化的稀疏贝叶斯学习STAP方法。     

从探测概率的角度评价飞机的隐身性能

采用雷达散射截面(RCS)均值来衡量飞机的隐身性能并不能给出足够充分的信息,从信号检测概率的角度来衡量飞机的可探测性可以提供更完整的信息。本文从探测概率的角度详细分析了4种典型隐身飞机RCS起伏数据与虚警概率、探测概率、探测距离、信噪比(SNR)等参数间的关系,并给出了完整的推导过程,采用此方法可以对任意飞机目标在给定雷达参数下的可探测性进行准确计算。一般在雷达性能评估中需要用到RCS起伏模型,本文对飞机目标回波信号进行检测分析时采用数值计算方法,信号的概率密度函数(PDF)直接来源于原始回波起伏信号,避免了模型拟合带来的回波特性失真,且不会产生大的计算误差。通过对比分析计算结果发现:单脉冲检测下回波信号均值中值比越大,回波取值范围越小,则信号的检测概率越小,其中均值中值比一般相差3倍以上时可以得到明显不同的检测概率;在快起伏假设下,非相参积累检测的积累脉冲数Nin即便较小,也能得到较大的信噪比增益,此增益可能大于Nin。     

子空间干扰加高斯杂波背景下基于 GLRT的斜对称方向检测器设计

文章研究了背景为子空间干扰加高斯杂波的距离扩展目标方向检测问题。杂波是均值为零协方差矩阵未知但具有斜对称特性的高斯杂波,目标与干扰分别通过具备斜对称特性的目标子空间和干扰子空间描述。针对方向检测问题,利用上述斜对称性,根据广义似然比检验(Generalized Likeli-hood Ratio Test,GLRT)准则的一步与两步设计方法,设计了基于 GLRT的一步法与两步法的距离扩展目标方向检测器。通过理论推导证明了这 2种检测器相对于未知杂波协方差矩阵都具有恒虚警率。对比相同背景下已有检测器,特别是在辅助数据有限的场景下,文章提出的 2个检测器表现出了优越的检测性能。     

Difference beam aided target detection in monopulse radar

The classical detection step in a monopulse radar system is based on the sum beam only,the performance of which is not optimal when target is not at the beam center. Target detection aided by the difference beam can improve the performance at this case. However, the existing difference beam aided target detectors have the problem of performance deterioration at the beam center, which has limited their application in real systems. To solve this problem, two detectors are proposed in this paper. Assuming the monopulse ratio is known, a generalized likelihood ratio test(GLRT) detector is derived, which can be used when targeting information on target direction is available. A practical dual-stage detector is proposed for the case that the monopulse ratio is unknown. Simulation results show that performances of the proposed detectors are superior to that of the classical detector.     

Target detection with synthetic aperture radar

Target detection with synthetic aperture radar (SAR) is considered. We derive generalized likelihood ratio (GLR) detection algorithms that may be used with SAR images that are obtained with coherent subtraction or have Gaussian distributions. We analytically compare the performance of (1) a single pixel detector, (2) a detector using complete knowledge of the target signature information and known orientation information, (3) a detector using incomplete knowledge of the target signature information and known orientation information (4) a detector using unknown target signature information and known orientation information, and (5) a detector using unknown target signature information and unknown orientation information     

Airborne/spacebased radar STAP using a structured covariance matrix

It is shown that partial information about the airborne/spacebased (A/S) clutter covariance matrix (CCM) can be used effectively to significantly enhance the convergence performance of a block-processed space/time adaptive processor (STAP) in a clutter and jamming environment. The partial knowledge of the CCM is based upon the simplified general clutter model (GCM) which has been developed by the airborne radar community. A priori knowledge of parameters which should be readily measurable (but not necessarily accurate) by the radar platform associated with this model is assumed. The GCM generates an assumed CCM. The assumed CCM along with exact knowledge of the thermal noise covariance matrix is used to form a maximum likelihood estimate (MLE) of the unknown interference covariance matrix which is used by the STAP. The new algorithm that employs the a priori clutter and thermal noise covariance information is evaluated using two clutter models: 1) a mismatched GCM, and 2) the high-fidelity Research Laboratory STAP clutter model. For both clutter models, the new algorithm performed significantly better (i.e., converged faster) than the sample matrix inversion (SMI) and fast maximum likelihood (FML) STAP algorithms, the latter of which uses only information about the thermal noise covariance matrix.     

Studies of target detection algorithms that use polarimetric radardata

Algorithms are described which make use of polarimetric radar information in the detection and discrimination of targets in a ground clutter background. The optimal polarimetric detector (OPD) is derived. This algorithm processes the complete polarization scattering matrix (PSM) and provides the best possible detection performance from polarimetric radar data. Also derived is the best linear polarimetric detector, the polarimetric matched filter (PMF), and the structure of this detector is related to simple polarimetric target types. New polarimetric target and clutter models are described and used to predict the performance of the OPD and the PME. The performance of these algorithms is compared with that of simpler detectors that use only amplitude information to detect targets. The ability to discriminate between target types by exploring differences in polarimetric properties is discussed     

Optimum and mismatched detection against K-distributed plusGaussian clutter

We derive the optimum radar receiver to detect fluctuating and non-fluctuating targets against a disturbance which is modeled as a mixture of coherent K-distributed and Gaussian-distributed clutter. In addition, thermal noise, which is always present in the radar receiver, is considered. We discuss the implementation of the optimum coherent detector, which derives from the likelihood ratio test under the assumption of perfectly known disturbance statistics, and evaluate its performance via a numerical procedure, when possible, and via Monte Carlo simulation otherwise. Moreover, we compare the performance of the optimum detector with those of two detectors which are optimum for totally Gaussian and totally K-distributed clutter respectively, when they are fed with such a mixed disturbance. We conclude that, though the optimum detector has a larger computational cost, it provides sensibly better detection performance than the mismatched detectors in a number of operational situations. Thus, there is a need to derive suboptimum target detectors against the mixture of disturbances which trade-off the detection performance and the implementation complexity     

Design and analysis of a knowledge-aided radar detector for doppler processing

In this paper we discuss the combined use of a priori information and adaptive signal processing techniques for the design and the analysis of a knowledge-aided (KA) radar receiver for Doppler processing. To this end, resorting to the generalized likelihood function (GLF) criterion (both one-step and two-step), we design and assess data-adaptive procedures for the selection of training data. Then we introduce a KA radar detector composed of three elements: a geographic-map-based data selector, which exploits some a priori information concerning the topography of the observed scene, a data-adaptive training selector which removes dynamic outliers from the training data, and an adaptive radar detector which performs the final decision about the target presence. The performance of the KA algorithm is analyzed both on simulated as well as on real radar data collected by the McMaster University IPIX radar. The results show that the new KA system achieves a satisfactory performance level and can outperform some previously proposed adaptive detection schemes     

A Sequential Detector

The PRSD detector improves radar performance by controlling the distribution of energy in space, thus making a radar adaptive to its environment. An increase in performance over classical detectors may be realized in any of several ways: 1) greater maximum range; 2) smaller minimum detectable targets; 3) higher data rates; 4) lower average transmitted power, which allows smaller size and weight of equipment. The model of the PRSD detector described herein was tested with a semi-agile beam radar, and gave measured field performance improvement (for this particular radar) equivalent to an S/N increase ranging from 5 to 22 dB with a mean of 9.5 dB. This increase is greater than the 5-dB improvement predicted for the system in a white noise environment because many of the field tests were at locations subjected to heavy interference. The PRSD detector was extremely effective reducing the interference. In this paper, we will briefly review the theory of operation, describe the equipment and the method of test, and present experimental data. The data presented here are essential to a complete understanding of sequential detection since a rigorous theory encompassing multiple range bin radar has not been developed at this time. Finally, an extensive bibliography is appended.     

Data Quantization for Narrowband Signal Detection

In automatic radar detection, digital integration of the envelope detector outputs is often used as a good approximation to the optimum. This requires quantizing the envelope detector outputs. In this paper, quantizer structures for narrowband signal detection are considered. Quantizer characteristics are derived to optimize performance as measured by the detector efficacy?an asymptotic performance measure. Asymptotic and finite sample performance results are presented. The results obtained are not limited in their application to Gaussian noise only, although this important case is given specific consideration.     

Analysis of an adaptive CFAR detector in non-Gaussian interference

Coherent signal detection in non-Gaussian interference is presently of interest in adaptive array applications. Conventional array detection algorithms inherently model the interference with a multivariate Gaussian random vector. However, non-Gaussian interference models are also under investigation for applications where the Gaussian assumption may not be appropriate. We analyze the performance of an adaptive array receiver for signal detection in interference modeled with a non-Gaussian distribution referred to as a spherically invariant random vector (SIRV). We first motivate this interference model with results from radar clutter measurements collected in the Mountain Top Program. Then we develop analytical expressions for the probability of false alarm and the probability of detection for the adaptive array receiver. Our analysis shows that the receiver has constant false alarm rate (CFAR) performance with respect to all the interference parameters. Some illustrative examples are included that compare the detection performance of this CFAR receiver with a receiver that has prior knowledge of the interference parameters