一种基于DRFM和数字信道化技术的 宽带雷达目标干扰模拟器设计

提出了一种DRFM和数字信道化技术的宽带雷达目标干扰模拟器设计方案,详细讨论了宽带雷达信号的数字信道化接收算法和基于DRFM的扩展目标/干扰生成方法。仿真分析结果表明,该方案可以实现1 GHz带宽的雷达导引头目标干扰信号模拟,并可推广用于宽带雷达导引头干扰机和宽带雷达导引头数据采集系统设计。     

Design of a space-based radar signal processor

Space-based radar (SBR) is capable of providing flexible wide-area coverage of air, land, and sea targets. Numerous studies have been carried out in the United States and Canada in recent years to investigate different concepts for SBR. The design of a suitable radar signal processor (RSP) is challenging due to the effects caused by the moving platform on target integration and clutter spectral spread. A candidate RSP is described that uses a corporate fed array (CFA) antenna as its primary radar sensor. The algorithmic definitions of the signal processing functions are provided; the relationships between these functions and the reasons for their location in the signal processing chain are also discussed. In addition, techniques for reducing the computational requirements are also presented     

Optimal Target t Designation Techniques

Studies of signal processing techniques are presented for achieving optimal autonomous acquisition of stationary targets located in a moderately intense nonhomogeneous radar ground clutter background. The process of target acquisition comprises three basic functions: 1) target detection, 2) target selection or designation, and 3) reacquiring the target for tracking. It is the second of these functions, i.e., autonomous designation of a target, that is the subject of this discussion. Theoretical analyses and predictions of the probability of correct target designation for two acquisition search methods are presented and compared with results achieved using real radar imagery.     

Tracker and signal processing for the benchmark problem with unresolved targets

Radar signal processing is particularly important in tracking closely spaced targets and targets in the presence of sea-surface-induced multipath. Closely spaced targets can produce unresolved measurements when they occupy the same range cell of the radar. These issues are the salient features of the benchmark problem for tracking unresolved targets combined with radar management, for which this paper presents the only complete solution to date. In this paper a modified version of a recently developed maximum likelihood (ML) angle estimator, which can produce two measurements from a single (unresolved) detection, is presented. A modified generalized likelihood ratio test (GLRT) is also described to detect the presence of two unresolved targets. Sea-surface-induced multipath can produce a severe bias in the elevation angle measurement when the conventional monopulse ratio angle extractor method is used. A modified version of a recently developed ML angle extractor, which produces nearly unbiased elevation angle measurements and significantly improves the track accuracy, is presented. Efficient radar resource allocation algorithms for two closely spaced targets and targets flying close to the sea surface are also presented. Finally, the IMMPDAF (interacting multiple model estimator with probabilistic data association filter modules) is used to track these targets. It is found that a two-model IMMPDAF performs better than the three-model version used in the previous benchmark. Also, the IMMPDAF with a coordinated turn model works better than the one using a Wiener process acceleration model. The signal processing and tracking algorithms presented here, operating in a feedback manner, form a comprehensive solution to the most realistic tracking and radar management problem to date.     

一种超宽带雷达信号模拟器的设计

为满足雷达装备不断增长的保障需求,研制了一套便携式雷达装备检测系统,该检测系统的核心组成部分是超宽带雷达信号模拟器。模拟器采用低频段基带信号与高频段本振信号2次混频来模拟产生0.05~16 GHz范围内多种体制的雷达信号,最后完成了电路实现,经过信号测试各项指标均达到设计要求。     

Dynamic Targets in CRRs Part II: Experiments and SAR Correspondence

Expressions describing the correspondence between moving-target artifacts for synthetic-aperture radar (SAR) and compact radar range (CRR) emulations are developed. Experimental results are then presented to verify the accuracy of these equations and to characterize the capacity of CRRs to emulate translating, vibrating, and rotating targets. We show that phase-compensation techniques can be applied to CRR data, providing a suitable test bed for SAR phase-compensation techniques.     

基于Keystone变换和MDCFT的高机动弱目标检测与参数估计

 常规雷达对隐身、超声速和高机动目标存在回波信噪比不足、距离徙动和多普勒谱扩展问题。将Keystone变换和修正离散Chirp-Fourier变换(MDCFT)相结合,提出了一种新的雷达信号处理算法。该算法通过Keystone变换补偿距离徙动问题,利用MDCFT对多普勒谱严重扩展的目标回波进行相参积累,提高目标检测性能的同时完成了对目标参数的估计,且该算法在方位向欠采样时仍可适用。最后对算法运算量及性能进行了分析,通过仿真验证了该算法的有效性。     

Software architecture requirements for DoD automatic test systems

The DoD has achieved success with recent automatic test equipment (ATE) families, as evidenced by the navy's consolidated automated support system (CASS) and the army's integrated family of test equipment (IFTE) programs. However, as these systems age, the increased requirements for technology insertion due to instrument obsolescence and the demands of advanced electronics are becoming evident. Recent advances in test technology promise to yield reduced total ownership costs (TOC) for ATE which can incorporate the new technology. The DoD automatic test system (ATS) executive agent office (EAO) objective is to significantly reduce total ownership cost. Several objectives have been identified including use of synthetic instruments, support for legacy test product sets (TPSs), and more efficient ways of developing TPSs. The NxTest software architecture will meet the objectives by providing an open systems approach to the system software. This will allow for the incorporation of commercial applications in the TPS development and execution environments and support current advances in test technology     

一种机动多目标雷达视频信号模拟器的设计

给出了一种机动多目标雷达视频信号模拟器的软硬件设计方案,它可实时输出所需的多个动目标雷达视频信号,雷达信号的类型、目标的数量、目标的回波特性、目标的运动特性、杂波的类型及参数等均可方便地进行设置。该模拟器可满足各种雷达信号处理算法(如杂波抑制、恒虚警检测、动目标跟踪、多基地数据融合等)的测试与效果分析,以及对雷达信号处理机等进行性能调试与测试的需要。     

起重机制动器试验台检测系统软件设计

数据的采集和处理是制动器试验台检测系统的关键,是制动器性能试验和质量检测的基础.根据某起重机制动器试验台的特点及检测项目需求,本文设计了基于虚拟仪器技术的起重机制动器试验台检测系统,详细阐述了该系统软件部分的结构、功能及其实现,并对其数据处理方法进行了具体说明.     

宽带信号去斜脉冲压缩处理方法的研究

宽带信号广泛应用于雷达、导航和卫星通讯等领域。宽带信号的传统接收处理方法主要是采用匹配滤波或子带分割技术。本文用去斜脉冲压缩处理方法处理宽带信号,给出了具体的实现结构和改进措施,分析了如何选择系统的信号采样频率,同时还给出了脉压波形的仿真结果及性能分析。实验表明:对中心频率为9.5GHz、带宽1.3GHz、脉冲宽度30μs的宽带线性调频信号,采用该方法处理只需90MHz采样数据率,大大降低了数据采集的难度。     

空间自旋目标宽带雷达干涉三维成像方法

空间目标三维成像可为目标的特征提取、分类与识别提供重要依据。基于L型三天线干涉成像原理,提出了一种宽带雷达条件下空间自旋目标干涉三维成像方法。首先,分析了雷达发射线性调频(LFM)信号条件下,空间自旋目标在距离-慢时间平面上的成像特点,建立了基于距离-慢时间平面的空间自旋目标干涉三维成像模型;其次,针对建立的干涉三维成像模型中,不同散射点的回波在距离-慢时间平面上会相互交叠的问题,对回波曲线分离、交叉点处理以及一维距离旁瓣的影响等进行了讨论,并给出了解决方法,从而获得目标三维图像。与已有方法相比,该方法可有效克服单基雷达三维成像无法获得目标各散射点真实三维位置以及在双/多基雷达三维成像时多部雷达回波联合处理较困难的问题。最后,仿真实验结果验证了所提方法的有效性。     

高距离分辨率的低截获概率雷达信号性能研究

首先,分析步进频率雷达信号实现高分辨率的优缺点,在此基础上设计了一种改进的步进频率信号-参差脉冲重复间隔步进频率信号;然后,分析了该信号的处理过程。与步进频率信号在高速目标下成像失真相比,参差脉冲重复间隔步进频率信号的多普勒性能有了很明显的改善。最后,分析了参差脉冲重复间隔步进频率信号的低截获概率特性。     

基于频谱和倒谱分析的探地雷达地杂波抑制

超宽带探地雷达被广泛用于检测浅层埋藏的反人员地雷,其中滤除强的地表反射回波是完成目标检测、成像与识别的关键。将独立分量分析算法与数据非一致性检测方法相结合,通过分析独立分量的频谱和倒谱,给出了一种可以适应多目标数据区域且自动选取独立分量的地杂波抑制方法。实验结果证明了该方法的可行性和有效性。     

基于复近似消息传递的前视雷达成像分辨率增强算法

当机载/弹载雷达工作在前视状态时,由于成像场景内不同角度处目标的多普勒差异很小,很难得到 高的角度分辨率。针对海面舰船目标的前视成像应用,利用成像区域具有明显稀疏性的特点,提出一种基于复 近似消息传递压缩感知处理的前视成像角度分辨率增强算法,建立前视成像的线性观测信号模型,给出复近似 消息传递的迭代计算过程,以及多通道雷达前视成像的处理流程。通过仿真数据和 X 波段雷达实测数据的处 理结果验证了该方法的有效性。     

宽带认知雷达低峰均比波形快速设计算法

发射波形设计是宽带认知雷达系统的关键技术。为了提高宽带认知雷达系统对距离扩展目标的检测性能,建立了目标检测模型,分析了系统的检测性能,在此基础之上研究了基于最大输出信干噪比(SINR)的低峰均比(PAR)波形设计算法。通过将原波形优化问题等效为接收权值与低峰均比波形的联合优化问题,同时利用循环优化的思想,提出了一种低峰均比波形快速设计算法。相比于现有的梯度法以及凸优化算法,该算法所设计的恒模波形信干噪比与二者相当,但算法实现难度明显变小,计算复杂度明显降低。仿真结果证实了算法的有效性。     

Radar: the evolution since World War II

Modern radar design has benefited from the evolution of specialized digital processing, allowing high resolution ground mapping, target identification, and target tracking under many conditions. Air-to-air interception makes use of complex decision processes to select from many modes that depend on the clutter backgrounds and flight profiles. Today's multimode radars provide this information for each task while minimizing distractions. Fire control radars support a wide selection of weapons, including cannons and guided missiles. This is possible because of advanced digital processing. In the interval since WW II, radar design evolved from vacuum tubes to semiconductors and then to massively integrated circuits. Computers specialized for fast Fourier transforms (FFTs) have revolutionized radar data processing. System reliability has improved from a few hours to hundreds of hours. Effective built-in test informs ground maintenance personnel of problems for easy maintenance and low failure rates reduce or eliminate field maintenance benches at forward locations. Airborne surveillance radars, such as AW ACS Joint Stars have changed the nature of warfare. Commanders have virtually full view of enemy and friendly forces. Radars, in combination with other remote sensors, provide precise weapon delivery, reducing collateral damage and making all weapons more effective     

Smuggling interdiction using an adaptation of the AN/APG-76multimode radar

The AN/APG-76 multimode radar was designed and developed for a multimode attack fighter application requiring rapid search, detection, identification, and precision location of both airborne and surface targets from long standoff ranges under adverse weather conditions. Unique is the radar's ability to generate SAR images of a selected area while simultaneously detecting and tracking all-speed moving objects located within that imaged region. Northrop Grumman Norden Systems has recently upgraded and adapted this radar to smuggling interdiction and related law enforcement missions. These adaptations have added an integrated GPS/INS subsystem for enhanced self-navigation and target location accuracy, a long range wide-band digital data link and ground station for mission control and data dissemination, a 3-D interferometric SAR imaging capability for detailed high resolution topographic mapping, and 1 meter and 0.3 meter resolution SAR modes for positive target identification. Additionally, the radar has been installed into wing-mounted pods and adapted for side-looking and 360 degree coverage applications. Automatic target detection and enhanced-range sea-surveillance and air-targeting modes are also now available through the use of open architecture commercial processors and non-proprietary transportable programming languages