翼伞系统在未知风场中的归航控制

翼伞系统在未知风场中执行归航任务时,需获得风场的大小和方向信息,以便在归航过程中利用或者消除风场的影响。为实现翼伞系统在未知风场中精确归航与逆风雀降着陆,首先提出一种利用全球定位系统(GPS)定位数据和最小二乘法在线辨识风向和风速的方法,然后将风场中平均风的影响在轨迹规划中予以考虑,设计分段归航路径;将突风作为外界干扰,在轨迹跟踪过程中由线性自抗扰控制(LADRC)器进行观测和补偿。最后通过仿真实验验证了本文所提出的归航控制方法对于提高翼伞系统在未知风场中的归航精度和抗风能力有重要意义。     

切换拓扑下无人机集群系统时变编队控制

针对多无人机(UAV)间通信拓扑可能发生变化的情况,研究了具有二阶积分特性的无人机集群系统的轨迹跟踪与时变编队控制问题。基于一致性方法设计了编队控制器,将编队控制问题转换成闭环系统的稳定性问题,引入了切换拓扑平均驻留时间的概念,并在此基础上利用线性矩阵不等式(LMI)方法,给出了控制器设计步骤。通过构造分段连续Lyapunov函数,证明了切换拓扑下无人机集群系统能够实现对指定轨迹的跟踪并且实现时变编队飞行。以三维空间运动的无人机集群系统为例进行了仿真验证,结果表明本文所提方法能够解决切换拓扑下无人机集群系统的轨迹跟踪与时变编队问题。     

基于径向基神经网络干扰观测器的空天飞行器自适应轨迹线性化控制

 研究了一种自适应轨迹线性化控制策略并应用于空天飞行器(ASV)飞行控制系统设计。通过理论分析指明当前轨迹线性化控制方法(TLC)对系统中的不确定存在鲁棒性不足的问题。为了解决这一问题，首先研究了一种径向基神经网络干扰观测器(RDO)技术，严格证明了RDO对于系统中不确定因素具有良好的逼近能力。然后利用RDO输出得到一种新的基于RDO的自适应TLC控制策略。神经网络自适应律采用Lyapunov方法设计，保证了闭环系统所有信号有界。最后采用新方案实现了ASV飞控系统，仿真结果表明整个闭环系统在鲁棒性能方面得到很大提高。     

基于鲁棒伺服 LQR的无人机横航向自动着陆控制律设计

针对无人机自动着陆过程中外部不确定性强,影响控制精度和飞行安全的问题,提出一种基于鲁棒伺服线性二次型(Linear Quadratic Regulator,LQR)的横航向自动着陆控制律设计方法。基于鲁棒伺服LQR设计滚转姿态保持内回路,设计航向保持/预选模态和航向信标(Localizer,LOC)截获与跟踪模态,实现横航向轨迹的稳定与精确跟踪。数字仿真结果表明,该方法具有较好的控制效果。     

Variational method based robust adaptive control for a guided spinning rocket

In this paper, a robust adaptive controller is designed for a guided spinning rocket, whose dynamics presents the characteristics of pitch-yaw cross coupling, fast time-varying aerodynamics parameters and wide flight envelop. First, a coupled nonlinear six-degree-of-freedom equation of motion for a guided spinning rocket is developed, and the lateral acceleration motion is modeled as a control plant with time-varying matched uncertainties and unmodeled dynamics. Then, a robust adaptive control method is proposed by combining Bregman divergence and variational method to achieve fast adaption and maintain bounded tracking. The stability of the resulting closed-loop system is proved, and the ultimate bound and convergence rate are also analyzed. Finally, numerical simulations are performed for a single operating point and the whole flight trajectory to show the robustness and adaptability of the proposed method with respect to time-varying uncertainties and unmodeled dynamics.     

大机动飞机的非线性鲁棒控制律设计

采用非线性不确定系统的高增益控制建设设计方法,为某型大机动飞机在特定飞行条件下设计了鲁棒控制律,以跟踪期望的输出轨迹,并在不同飞行条件下进行了系统仿真研究。仿真结果表明,采用所设计的控制律,在不同飞行条件下,飞机均可同时完成较精确的纵向和侧向机动跟踪,说明控制律具有较好的鲁棒性。     

基于高斯伪谱法的翼伞系统复杂多约束轨迹规划

翼伞系统在实际环境中飞行时易受到风场以及地形环境等复杂干扰的影响,无法精确归航,控制难度较大。针对该问题,提出了一种针对复杂多约束条件的翼伞系统的最优控制轨迹规划方法,可同时实现翼伞系统在复杂环境下逆风对准、精确着陆以及控制量全局最优的控制目标。首先,建立了风场干扰下的翼伞系统模型;然后,通过引入地形环境曲面,将复杂环境转化为实时路径约束,将轨迹着陆偏差以及逆风雀降转化为终端约束,并考虑控制量消耗最小为目标函数,以此将复杂环境下的翼伞系统的轨迹优化转化为一系列非线性的带有复杂约束的最优控制问题;最后,采用高斯伪谱法将多约束最优控制问题转化为易于求解的非线性规划问题。通过设立3组复杂环境仿真实例和实验验证,表明本文方法使翼伞系统在多种较恶劣的复杂环境中有效应对多类约束条件,规划出控制量全局最优的可行轨迹。与已有的混沌粒子群优化算法相比,本文方法具有较好的最优性和较高的精度。     

一种两自由度飞行机械臂系统的设计与实现

提出了一种基于欧拉-拉格朗日方法的飞行机械臂系统模型,在机械臂缓慢运动的合理假设下,模型不仅能有效描述实际系统,同时模型表达得到了精简。在此基础上进行控制器设计,首先使用输出变换将系统反馈线性化,并将内外环动态分离,基于此分别设计外环滑模控制器和内环比例-积分-微分（PID）控制器。该控制器在仿真实验中能有效抑制机械臂带来的扰动且镇定和轨迹跟踪性能明显优于经典的串级比例-积分-微分控制器。结果表明本文提出的建模和控制方法能够有效补偿机械臂的已建模扰动,并能充分抑制机械臂摆动产生的未建模扰动,且控制器计算复杂度适中,能够满足实际应用需求。     

可重复使用飞行器的保性能姿态跟踪控制方法

针对可重复使用飞行器再入姿态跟踪控制问题,在考虑执行器饱和、气动参数摄动和外部扰动的情况下,提出了一种保性能姿态跟踪控制方案。通过构造预设性能函数,使姿态跟踪误差在预先设置的包络内演化,保证了系统的瞬态和稳态性能;其次,借助于高增益扩张状态观测器解决了气动参数摄动和外部扰动的问题;之后,基于反步控制框架,设计了一种低复杂度的输出反馈扰动补偿控制方法,保证跟踪误差的收敛性。与已有方法相比,所设计的方法不包含一些复杂的非线性动力学近似技术,如神经网络等,降低了参数调节的复杂性,且无需对虚拟控制律重复微分,避免了"微分爆炸"问题。同时,Lyapunov稳定性分析表明,该方法能够保证误差变量的预期收敛以及其他闭环系统信号的有界性。最后,通过对比仿真验证了所提方法的有效性及可行性。     

高速开关阀控电液位置伺服系统自适应鲁棒控制

为研究高精度的液压缸位置跟踪控制问题，设计了高速开关阀和换向阀组合控制液压缸的结构方案，并通过实验分析了高速开关阀的静态流量特性。建立了液压缸的连续可微摩擦模型，利用粒子群优化算法对其参数进行辨识。建立了系统的非线性数学模型，基于非连续参数映射和反步法设计了直接自适应鲁棒控制器，通过参数在线自适应调节来更新估计值和鲁棒反馈项支配参数不确定性，实验结果表明:在跟踪幅值为5mm，频率为0.4Hz的正弦信号时，最后一个周期的最大跟踪误差、平均跟踪误差及其标准差分别为0.638、0.25mm和0.405mm，与传统PID控制器相比，控制精度显著提升，旨在为实现高精度的数字阀控位置伺服技术提供有价值的参考。      

Adaptive formation control of quadrotor unmanned aerial vehicles with bounded control thrust

In this paper, the flight formation control problem of a group of quadrotor unmanned aerial vehicles (UAVs) with parametric uncertainties and external disturbances is studied. Unit-quaternions are used to represent the attitudes of the quadrotor UAVs. Separating the model into a translational subsystem and a rotational subsystem, an intermediary control input is introduced to track a desired velocity and extract desired orientations. Then considering the internal parametric uncertainties and external disturbances of the quadrotor UAVs, the priori-bounded intermediary adaptive control input is designed for velocity tracking and formation keeping, by which the bounded control thrust and the desired orientation can be extracted. Thereafter, an adaptive con-trol torque input is designed for the rotational subsystem to track the desired orientation. With the proposed control scheme, the desired velocity is tracked and a desired formation shape is built up. Global stability of the closed-loop system is proven via Lyapunov-based stability analysis. Numer-ical simulation results are presented to illustrate the effectiveness of the proposed control scheme.     

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method.     

Real-time trajectory planning for UCAV air-to-surface attack using inverse dynamics optimization method and receding horizon control

This paper presents a computationally efficient real-time trajectory planning framework for typical unmanned combat aerial vehicle (UCAV) performing autonomous air-to-surface (A/S) attack. It combines the benefits of inverse dynamics optimization method and receding horizon optimal control technique. Firstly, the ground attack trajectory planning problem is mathematically formulated as a receding horizon optimal control problem (RHC-OCP). In particular, an approximate elliptic launch acceptable region (LAR) model is proposed to model the critical weapon delivery constraints. Secondly, a planning algorithm based on inverse dynamics optimization, which has high computational efficiency and good convergence properties, is developed to solve the RHCOCP in real-time. Thirdly, in order to improve robustness and adaptivity in a dynamic and uncer- tain environment, a two-degree-of-freedom (2-DOF) receding horizon control architecture is introduced and a regular real-time update strategy is proposed as well, and the real-time feedback can be achieved and the not-converged situations can be handled. Finally, numerical simulations demon- strate the efficiency of this framework, and the results also show that the presented technique is well suited for real-time implementation in dynamic and uncertain environment.     

Trajectory Tracking Control for a GMM Actuator Based on a Heuristic ILC Method

A heuristic iterative learning control (ILC) method is presented and applied to the trajectory tracking control of a giant magne-tostrictive material (GMM) actuator. A GMM actuator is used as experimental equipment for micro-displacement trajectory tracking control. The advantage of the presented approach lies in quitting the model of the GMM actuator. The experimental results attest to the high efficiency of the presented method for the micro-displacement trajectory tracking control.     

Fuzzy adaptive robust control for space robot considering the effect of the gravity

Space robot is assembled and tested in gravity environment, and completes on-orbit service（OOS） in microgravity environment. The kinematic and dynamic characteristic of the robot will change with the variations of gravity in different working condition. Fully considering the change of kinematic and dynamic models caused by the change of gravity environment, a fuzzy adaptive robust control（FARC） strategy which is adaptive to these model variations is put forward for trajectory tracking control of space robot. A fuzzy algorithm is employed to approximate the nonlinear uncertainties in the model, adaptive laws of the parameters are constructed, and the approximation error is compensated by using a robust control algorithm. The stability of the control system is guaranteed based on the Lyapunov theory and the trajectory tracking control simulation is performed. The simulation results are compared with the proportional plus derivative（PD） controller, and the effectiveness to achieve better trajectory tracking performance under different gravity environment without changing the control parameters and the advantage of the proposed controller are verified.     

直接力与气动力复合控制拦截弹轨迹控制

研究了直接力与气动力复合控制拦截弹的轨迹控制问题.建立了复合控制拦截弹的动力学模型,分析了不同复合方式的差别,指出了直接力对弹体运动的影响.建立了拦截弹与目标的相对运动模型,针对直接力与气动力复合控制的特殊性,基于滑模控制理论给出了轨迹控制算法,并在此基础上针对传统控制方法的缺陷,设计了脉冲发动机的点火逻辑.仿真结果表明,该方法能有效的实现拦截弹在末制导段的精确制导控制,并具有较强的鲁棒性.      

轨迹跟踪伺服系统的鲁棒复合控制

针对控制输入饱和受限且带有未知扰动的电机伺服系统,提出一种实现曲线轨迹准确跟踪的鲁棒复合控制方案。该方案引入一个参考信号生成器和一个扩展状态观测器,其中参考信号生成器可根据目标轨迹信号构造出对应的状态量,扩展状态观测器用于对系统的状态量和扰动进行估计, 采用反馈与前馈相结合构成最终的控制律。利用Lyapunov理论对闭环系统的稳定性进行了严格分析。在MATLAB中进行了仿真研究,随后在一个DSP控制的永磁直线电机二维伺服平台进行了试验验证。结果表明:所提的控制方案能在轨迹跟踪任务中取得优越的瞬态性能和稳态准确性,而且对目标轨迹和扰动的幅值差异具有较好的鲁棒性。     

Decentralized adaptive sliding mode control of a space robot actuated by control moment gyroscopes

An adaptive sliding mode control(ASMC) law is proposed in decentralized scheme for trajectory tracking control of a new concept space robot.Each joint of the system is a free ball joint capable of rotating with three degrees of freedom(DOF).A cluster of control moment gyroscopes(CMGs) is mounted on each link and the base to actuate the system.The modified Rodrigues parameters(MRPs) are employed to describe the angular displacements,and the equations of motion are derived using Kane's equations.The controller for each link or the base is designed separately in decentralized scheme.The unknown disturbances,inertia parameter uncertainties and nonlinear uncertainties are classified as a ‘‘lumped" matched uncertainty with unknown upper bound,and a continuous sliding mode control(SMC) law is proposed,in which the control gain is tuned by the improved adaptation laws for the upper bound on norm of the uncertainty.A general amplification function is designed and incorporated in the adaptation laws to reduce the control error without conspicuously increasing the magnitude of the control input.Uniformly ultimate boundedness of the closed loop system is proved by Lyapunov's method.Simulation results based on a three-link system verify the effectiveness of the proposed controller.     

空天飞行器的鲁棒自适应模糊轨迹线性化控制

提出了鲁棒自适应模糊轨迹线性化控制(RAFTLC)方法并应用于空天飞行器(ASV)飞行控制系统设计.根据系统的先验知识, 设计出标称模糊系统对系统的未知干扰和不确定进行估计, 并通过鲁棒自适应控制项来克服标称模糊系统逼近误差和权值误差的影响.标称模糊系统逼近误差和权值误差的界在线调整.采用Lyapunov方法证明了闭环系统的所有信号一致最终有界.最后利用提出的控制方案设计了ASV飞行控制系统, 并在高超声速条件下进行了仿真验证.仿真结果表明了控制方案的有效性和鲁棒性.      

非线性变结构解耦控制及对再入飞行器的应用

讨论了一类非线性系统的变结构解耦控制在再入飞行器的应用,变结构解耦控制号输入输出线性比相结合得到的控制规律,可对象模型的不确定有鲁棒性,对于再入飞行器再入段存在的多变量非线性和参数不确定,应用了相应的变结构解耦控制的方法,讨论了其滑模面的构造方法和解耦控制条件,在姿态控制中保证了姿态跟踪期望值,在轨迹跟踪中,设计了内外回路在控制律,内回路运用变结构解耦控制保持姿态稳定,外回路通过设计比例微分控制保