面向互联飞机的空天地网络一体化融合研

随着数字化技术的发展，民用飞机会在飞行各阶段产生大量数据，这些数据的利用及处理将提升飞机运营的经济性、安全性与舒适性。为了适应未来互联飞机对海量数据交换与传输的迫切需求，满足民用飞机对无线通信服务质量(QoS)的要求，有必要充分利用并合理分配多种现有和未来的空天地无线通信链路资源。分析了互联飞机的概念、生态系统及其对空天地网络的网络需求，研究了地面异构移动互联网采用的紧耦合和松耦合两种融合方法，采用了网络体系融合、IP网络和非IP网络融合及终端融合等多种融合手段，提出了适应于多种通信链路与网络体系特点的一体化空天地无线通信链路的融合架构，并对网络协议栈、网络安全以及集成验证提出了初步考虑。     

基于分布式仿真技术的惯性导航模拟训练软件设计

利用两台计算机分别对飞机的飞行过程(圆周协调转弯)和惯导系统进行仿真,对飞机飞行过程的仿真采用VC++和LabWindows/CVI语言,同时运用LabWindows/CVI语言完成了可视界面的制作,制作的用户界面直观、方便、简洁,易于使用与维护。最后利用相应的通讯程序通过网络将两台模拟器连接起来,完成基于分布式仿真技术的惯性导航模拟训练软件设计和实现。     

Security, Internet connectivity and aircraft data networks

Internet connectivity which was in experimental stages only a few years ago is a reality today. Current implementations allow passengers to access Internet for pleasure and in some cases secure VPN access is provided to corporate networks. Several researchers are looking at the possibility of the existence of a total of three networks: passenger network (PN); crew network (CRN); and the control network (CON). Researchers envision an architecture where these three networks will co-exist in an airplane. The available Internet connectivity can be utilized for transporting flight critical information like cockpit flight data recorder (CFDR) data, digital flight data recorder (DFDR) data, cockpit voice recorder (CVR) data, and controller pilot data link communication. In addition, the Internet connectivity could also be used for other safety mechanisms like video surveillance and remote control of the flight. Security is one of the major concerns that affect the successful deployment of aircraft data networks (ADN) and other safety features. Several studies have been carried out to secure the network using firewalls and intrusion detection system but so far no study has focused on securing the communication channel (between the aircraft and the ground station) and its impact on the ADN. The scope of this research is to determine the viability and need of a security mechanism. The research also focuses on the performance of different security architectures and determine their usability in the framework of an ADN.     

空中机器人飞行平台设计与分析

空中机器人指能够实现自主或者半自主飞行的无人飞行器,一般还具有一定的自主执行任务能力.自主特性减少了其对地面站的依赖,但同时要求飞行平台有良好的操纵性和稳定性,飞行高效、安全、可靠.本文介绍了空中机器人的种类、实用价值和使用要求,并为此设计了一款飞行平台,论述了该飞行平台总体设计与分析的方法.以此为基础搭建的"哨兵"无人机系统,在2005"枭龙杯"中国空中机器人中大赛表现不凡,获得固定翼5公斤级亚军、飞行器系统设计一等奖的优异成绩.本文的计算结果在无人机系统试飞和比赛中都得到了验证.     

一种艇翼式飞行器的设计及验证

艇翼式飞行器结合了浮空飞艇和飞机的特点,具有低速性能优越、有效载荷大、应用范围广和节能环保等优势。针对升浮一体布局的气动、结构等特殊问题,提出一种艇翼式飞行器的布局方案,完成艇翼式飞行器的总体设计,制作验证样机并成功试飞。通过飞行数据的对比说明艇翼式飞行器的性能特点,验证了设计方法的正确性和设计方案的可行性。     

一种优先级区分的机载无线网络MAC层自适应退避算法

针对现有无线网络媒介接入控制(MAC)协议退避机制存在的竞争窗口(CW)易产生振荡、不能为紧急业务提供低时延QoS保障、难以区分服务类别等不足,提出了一种区分业务优先级的自适应退避(PAB)算法。该算法在二进制指数退避(BEB)算法的基础上,根据信道忙闲标识和业务优先级自适应选择相应退避阶段,通过参数设置可对不同优先级业务相邻退避阶段的前、后转移概率进行调整。利用二维马尔可夫链理论对PAB进行了建模分析,理论分析获得了饱和吞吐量和平均MAC时延的数学表达式,仿真实验结果表明:在机载无线网络(AN)环境下,PAB的性能相对BEB有了显著提升,可有效保障机载无线网络多业务类型的传输需求。     

基于FC光传总线的分布式容错系统组通信协议

分布式容错系统常用于构造高可靠的关键应用,其核心构件组通信协议(GCP)实现了带有可靠性语义的多对多的通信原语。本文主要讨论基于光纤通道(FC)总线用于分布式容错的组通信协议,探讨了使用冗余消息技术实现实时、可靠数据传输的方法,提出了将数据和控制消息分开处理来实现数据输入实时性和控制消息按因果顺序提交的算法,力求获得最大程度的并行性。提出并设计了基于领导者-跟随者的故障处理机制,利用两阶段事务处理协议实现故障处理中的视图同步和状态切换,给出了协议的设计原理和实现框架。最后给出了该协议在基于PowerPC单板计算机的三余度容错飞行控制计算机系统中的运行结果,并对该结果进行了简要分析。     

飞行器神经元控制系统的研究与设计

提出了一种基于神经元网络的飞行控制系统设计方法 ,该方法设计的神经元飞行控制器具有良好的鲁棒性 ,使飞行器在整个飞行包络内都能保持某种最优的操纵品质。给出的计算机仿真结果显示出神经元网络作为飞行控制器在处理飞行器参数大范围变化的非线性特性方面具有潜在的优良品质     

千兆光纤先锋网通信协议及其在网卡中的实现

根据航空电子综合系统的特点,对FC标准簇进行简化,设计了先锋交换网的通信协议(FC-Pio(Fibre Channel-Pioneer Net)协议).重点介绍其在网卡(MC)中的实现.由于简化了通信协议,软硬件的合理分工,使全部控制电路集成在一片FPGA之中,用双面PCB板实现.采用FC-Pio精简协议,也有效地降低了软件通信开销,提高了数据通信效率.     

Effective control allocation using hierarchical multi-objective optimization for multi-phase flight

For different flight phases in an overall flight mission, different control and allocation preferences should be pursued considering lift, drag or maneuverability characteristics. The multi-objective flight control allocation problem for a multi-phase flight mission is studied. For an overall flight mission, different flight phases namely climbing, cruise, maneuver and gliding phases are defined. Firstly, a multi-objective control allocation problem considering drag, lift or control energy preference is constructed. Secondly, considering different control preferences at different flight phases, the analytic hierarchical process method is used to construct a comprehensive performance index from different objectives such as lift or drag preferences. The active set based dynamic programming optimization method is used to solve the real-time optimization problem. For the validation, the Innovative Control Effector (ICE) tailless aircraft nonlinear model and the angular acceleration measurements based adaptive Incremental Backstepping (IBKS) are used to construct the validation platform. Finally, an overall flight mission is simulated to demonstrate the efficiency of the proposed multi-phase and multi-objective flight control allocation method. The results show that the comprehensive performance index for different phases, which are determined from the Analytic Hierarchy Process (AHP) method, can suitably satisfy the preference requirements for different flight phases.     

Networks of low-Earth orbit store-and-forward satellites

A slotted multiaccess protocol is proposed for networks of low-Earth orbit store-and-forward communications satellites. Networks of this type would provide communication between low cost geographically distributed Earth stations, and would be particularly attractive in areas where conventional terrestrial communications systems were not available. Applications of this type include data acquisition and remote process monitoring. The proposed protocol incorporates time division multiplexing (TDM) on the downlink, slotted Aloha with collision resolution on the uplink, and an automatic repeat request (ARQ) algorithm. Since the network connectivity is intermittent, analysis of networks of this type is difficult. Nevertheless, relationships among the performance parameters for a general network are deduced, and performance of three particular network configurations is studied via simulation     

折叠翼飞行器发射段鲁棒非线性控制系统设计

为解决折叠翼飞行器在发射段各项特性变化较大、对飞行控制律鲁棒性要求较高的问题,设计了一种以块控反步法为基础的自适应鲁棒非线性控制器.在发射段动态模型基础上,该控制器采用径向基函数( RBF)神经网络自适应逼近飞行器特性变化时的系统未知不确定性和干扰,通过在虚拟控制律中引入动态面控制技术避免多重微分运算,克服了传统反步法...     

光纤通道节点端口状态机的分析、建模与仿真

随着航电系统的发展,传统的通信网络已经不能满足发展需要,光纤通道(FC)技术已成为航电系统新一代高性能网络的研究方向.研制机载FC网络,其中一个重要环节是FC协议分析,FC节点端口状态机作为FC-2层中最为基础但最为复杂的功能块需要重点突破.分析了FC节点端口状态机的状态组成,基于0PNET Modeler仿真软件,说明了FC端口状态机的建模和仿真结果,通过仿真分析为下一步深入研究FC协议积累了一些理论基础.     

Distributed flight control system using fiber distributed datainterface (FDDI)

The design of fault-tolerant distributed control systems is discussed. The application described is a generic flight control system (FCS) for a fighter aircraft. The system is designed for high redundancy and expandability to meet various requirements. The communication network is based on the fiber distributed data interface (FDDI), which provides a high level of electromagnetic interference resistance and reliability. The choice of fiber optic media also provides an extremely high bandwidth and tremendous growth capability for future communications needs. This study is not specific to FDDI or flight control systems. The methods and configurations presented should be applicable to many real-time control implementations     

自动着舰的控制构型研究

在参考美军自动着舰系统(ACLS)的基础上,研究工程上最合适的ACLS控制构型。首先,分析了垂直速度指令和俯仰角指令在轨迹控制本质上的不同点和相同点;然后,将上述两种指令控制结构与两种动力补偿系统(速度保持APCS和迎角保持APCS)一对一组合成4种控制构型,仿真比较了这4种构型在指令响应、风扰抑制上的性能差异,分析了其物理原因。结果表明,H·指令加迎角保持APCS的控制构型对飞机纵向控制更有利,特别是对轨迹、高度要求严格的着舰任务。这与美军的实际试飞结论相同。     

民用飞机甚高频通信系统适航审定技术分析

民用飞机进行可靠的空地、空空通信,对飞行安全尤为重要。甚高频(very high frequency,简称VHF)通信系统是目前应用最为广泛的航空通信方式,VHF通信系统通过与机上音频系统交联实现飞机与外部的语音通信,通过与机上数据链系统交联实现飞机与地面的数据链通信。甚高频通信系统与民用飞机的安全运行密切相关,也是适航规章和运行规章要求的内容。结合甚高频通信系统功能要求和设计架构,针对适用于甚高频通信系统的中国民用航空规章第25部：运输类飞机适航标准(CCAR-25-R4-2011)条款,分析并给出甚高频通信系统可接受的符合性方法,同时根据型号工作经验给出甚高频通信系统在适航审查中的审定要素。针对甚高频通信系统所涉及的各项条款,为局方提供了适航审查工作需要关注的审定要素和评审要求。研究有助于民机甚高频通信系统的安全设计与适航验证。     

编制摸拟器设计和性能数据要求的初步考虑

在研制飞行模拟器时，飞行模拟器的设计和性能数据是必需的。这些数据不仅是形成满足飞行模拟器各种规范和标准要求的基础，而且也是构成模拟器逼真度要求的基础。根据国际航空运输协会的要求，初步讨论了编制飞行模拟器设计和性能数据要求所考虑的因素。     

Semi-global leader-following consensus-based formation flight of unmanned aerial vehicles

In this paper, we investigate a formation control problem of multi-agent systems(specifically a group of unmanned aerial vehicles) based on a semi-global leader-following consensus approach with both the leader and the followers subject to input saturation. Utilizing the low gain feedback design technique, a distributed static control protocol and a distributed adaptive control protocol are constructed. The former solves the problem under an assumption that the communication network is undirecte...     

基于动态逆的神经网络超机动飞行控制

为战斗机的过失速超机动飞行设计了一种神经网络控制器。基于时标分离的原则,神经控制器被设计为内环控制器和外环控制器两个部分。网络的训练利用改进的BP算法,将因子模糊化快速进行。样本点数据则由利用动态逆控制所得到的结果来提供。网络的使用利用联想记忆法则。仿真结果说明所设计的系统具有良好的控制性能及鲁棒性。     

飞机管理系统1394总线AS5643协议的设计与实现

随着JSF项目首先在航空器中采用IEEE-1394b总线,使得该总线在航空电子系统中被快速广泛地使用。AS5643协议在IEEE-1394b总线协议的基础上通过增加限制的方法,满足了新一代飞机管理系统总线对于高带宽、高确定性和高可靠性的要求。分析了基于飞机管理系统总线的基本拓扑结构和AS5643协议,阐述了一种基于FPGA逻辑设计实现AS5643协议的解决方案。通过实验验证,表明设计解决方案满足设计指标,性能良好,实现了飞机管理系统总线机载环境的应用要求。