Extraction of hydrothermal alterations from ASTER SWIR data from east Zanjan,northern Iran

The use of satellite images for mineral exploration has been very successful in pointing out the presence of minerals such as smectite and kaolinite which are important in the identification of hydrothermal alterations. Shortwave infrared (SWIR) bands from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) with the wavelength of ASTER SWIR bands between 1.65 and 2.43 μm has a good potential for mapping a hydrothermal alteration minerals such as alunite, pyrophyllite, kaolinite, illite–muscovite–sericite, and carbonate. In this range, hydroxide minerals which have been produced by hydrothermal alteration exhibit good absorption compared to shorter or longer wavelengths. In this research which aims to remove atmospheric and topographic effects from ASTER SWIR data, the authors used the log-residual method (LRM) with the minimum noise fraction (MNF) transformation to create a pixel purity index (PPI) which was used to extract the most spectrally pure pixels from multispectral images. Spectral analyses of the clay mineralogy of the study area (east Zanjan, in northern Iran) were obtained by matching the unknown spectra of the purest pixels to the U.S. Geological Survey (USGS) mineral library. Three methods, spectral feature fitting (SFF), spectral angle mapping (SAM), and binary encoding (BE) were used to generate a score between 0 and 1, where a value of 1 indicates a perfect match showing the exact mineral type. In this way, it was possible to identify certain mineral classes, including chlorite, carbonate, calcite–dolomite–magnesite, kaolinite–smectite, alunite, and illite. In this research, two main propylitic and phyllic–argillic zones could be separated using their compositions of these minerals. These two alteration zones are important for porphyry copper deposits and gold mineralization in this part of Iran.     

Identifying areas of high economic-potential copper mineralization using ASTER data in the Urumieh–Dokhtar Volcanic Belt,Iran

This study investigates the application of spectral image processing methods to ASTER data for mapping hydrothermal alteration zones associated with porphyry copper mineralization and related host rock. The study area is located in the southeastern segment of the Urumieh–Dokhtar Volcanic Belt of Iran. This area has been selected because it is a potential zone for exploration of new porphyry copper deposits. Spectral transform approaches, namely principal component analysis, band ratio and minimum noise fraction were used for mapping hydrothermally altered rocks and lithological units at regional scale. Spectral mapping methods, including spectral angle mapper, linear spectral unmixing, matched filtering and mixture tuned matched filtering were applied to differentiate hydrothermal alteration zones associated with porphyry copper mineralization such as phyllic, argillic and propylitic mineral assemblages.     

Application of WorldView-3 imagery and ASTER TIR data to map alteration minerals associated with the Rodalquilar gold deposits,southeast Spain

The Rodalquilar epithermal quartz-alunite gold deposits that occur within the Rodalquilar caldera complex in southeast Spain, are associated with a pronounced hydrothermal alteration of the country rocks. The hydrothermal alteration zones that are exposed on the surface consist of the vuggy silica zone, the advanced argillic alteration zone, the intermediate argillic alteration zone, the propylitic alteration zone, and a second stage supergene acid sulfate alteration. High spatial resolution multispectral imagery recorded by the WorldView-3 satellite was used in this study to map the spatial distribution of the main alteration minerals in the Rodalquilar caldera complex. Thermal infrared (TIR) data of the ASTER satellite were used to detect the quartz-rich zones. The analysis of the Rodalquilar WorldView-3 data was based on the Adaptive Coherence Estimator (ACE), a partial unmixing algorithm. The ACE processing accurately mapped the spatial distribution of alunite, kaolinite, illite and goethite. Alunite is abundant in the vuggy silica and advanced argillic alteration zones, and in the second stage supergene acid sulfate alteration. Kaolinite is predominant in the intermediate argillic alteration zone. Illite is abundant in the outer parts of the intermediate argillic alteration zone. Goethite image maps gossans that mainly occur in the vuggy silica and advanced argillic alteration zones, and in the areas characterized by the second stage supergene acid sulfate alteration. The detection of quartz-rich zones from the ASTER TIR data complemented the WorldView-3 mapping results. The study shows the efficiency of high spatial resolution multispectral remote sensing imagery recorded by the WorldView-3 satellite for district-level mineral exploration studies.     

Remote sensing detection of gold related alteration zones in Um Rus area, Central Eastern Desert of Egypt

Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and Phased Array L-band Synthetic Aperture Radar (PALSAR) images covering the Um Rus area in the Central Eastern Desert of Egypt were evaluated for mapping geologic structure, lithology, and gold-related alteration zones. The study area is covered by Pan-African basement rocks including gabbro and granodiorite intruded into a variable mixture of metavolcanics and metasediments. The first three principal component analyses (PCA1, PCA2, PCA3) in a Red-Green-Blue (RGB) of the visible through shortwave-infrared (VNIR + SWIR) ASTER bands enabled the discrimination between lithological units. The results show that ASTER band ratios ((2 + 4)/3, (5 + 7)/6, (7 + 9)/8) in RGB identifies the lithological units and discriminates the granodiorite very well from the adjacent rock units.The granodiorites are dissected by gold-bearing quartz veins surrounded by alteration zones. The microscopic examination of samples collected from the alteration zones shows sericitic and argillic alteration zones. The Spectral Angle Mapper (SAM) and Spectral Information Divergence (SID) supervised classification methods were applied using the reference spectra of the USGS spectral library. The results show that these classification methods are capable of mapping the alteration zones as indicated by field verification work. The PALSAR image was enhanced for fracture mapping using the second moment co-occurrence filter. Overlying extracted faults and alteration zone classification images show that the N30E and N-S fractures represent potential zones for gold exploration. It is concluded that the proposed methods can be used as a powerful tool for ore deposit exploration.     

Mineral mapping in the Kap Simpson complex,central East Greenland,using HyMap and ASTER remote sensing data

This research focuses on the application of HyMap airborne hyperspectral data and ASTER satellite multispectral data to mineral exploration and lithologic mapping in the Arctic regions of central East Greenland. The study area is the Kap Simpson complex in central East Greenland. The Kap Simpson complex is one of the largest exposed Palaeogene felsic complexes of East Greenland. It has been the target of several mineral exploration projects. The analysis of the HyMap data produced a detailed picture of the spatial distribution of the alteration minerals in the Kap Simpson complex, unavailable from field-based studies in the area. The analysis of the ASTER data produced mineral maps which due to the moderate spatial and spectral resolution of the ASTER imagery can be useful for reconnaissance level mineral exploration. Colour composites of the mean normalized ASTER thermal bands display lithological information and detected a large felsic igneous intrusion that has not been shown on the recently compiled geological maps of the area. The results of this research have considerable potential to evaluate the use of hyperspectral and multispectral remote sensing for geological purposes in the Arctic regions of central East Greenland.     

Study of changes in the lineament structure,caused by earthquakes in South America by applying the lineament analysis to the Aster (Terra) satellite data

The region between Southern Peru and Northern Chile is one of the most seismically and volcanically active regions in South America. This is caused by a constant subduction of the South American Plate, converging with the Nazca Plate in the extreme North of Chile. We used the 15 and 30 m resolution satellite images, provided by the ASTER (VNIR and SWIR) instrument onboard the Terra satellite to study changes in the geological faults close to earthquake epicenters in southern Peru. Visible and infrared spectral bands were analysed using “The Lineament Extraction and Stripes Statistic Analysis” (LESSA) software package to examine changes in the lineament features and stripe density fields caused by seismic activity. We used the satellite images 128 and 48 days before and 73 days after a 5.2 Richter scale magnitude earthquake. The fact that the seasonal variations in the South of Peru and North of Chile are very small, and the vegetation is very limited, allowed us to establish substantial changes in the lineament and the stripe density field features. We develop a methodology that allows to evaluate the seismic risk in this region for the future.     

Surface temperature estimation in Singhbhum Shear Zone of India using Landsat-7 ETM+ thermal infrared data

Land surface temperature (LST) is an important factor in global change studies, heat balance and as control for climate change. A comparative study of LST over parts of the Singhbhum Shear Zone in India was undertaken using various emissivity and temperature retrieval algorithms applied on visible and near infrared (VNIR), and thermal infrared (TIR) bands of high resolution Landsat-7 ETM+ imagery. LST results obtained from satellite data of October 26, 2001 and November 2, 2001 through various algorithms were validated with ground measurements collected during satellite overpass. In addition, LST products of MODIS and ASTER were compared with Landsat-7 ETM+ and ground truth data to explore the possibility of using multi-sensor approach in LST monitoring. An image-based dark object subtraction (DOS3) algorithm, which is yet to be tested for LST retrieval, was applied on VNIR bands to obtain atmospheric corrected surface reflectance images. Normalized difference vegetation index (NDVI) was estimated from VNIR reflectance image. Various surface emissivity retrieval algorithms based on NDVI and vegetation proportion were applied to ascertain emissivities of the various land cover categories in the study area in the spectral range of 10.4–12.5 μm. A minimum emissivity value of about 0.95 was observed over the reflective rock body with a maximum of about 0.99 over dense forest. A strong correlation was established between Landsat ETM+ reflectance band 3 and emissivity. Single channel based algorithms were adopted for surface radiance and brightness temperature. Finally, emissivity correction was applied on ‘brightness temperature’ to obtain LST. Estimated LST values obtained from various algorithms were compared with field ground measurements for different land cover categories. LST values obtained after using Valor’s emissivity and single channel equations were best correlated with ground truth temperature. Minimum LST is observed over dense forest as about 26 °C and maximum LST is observed over rock body of about 38 °C. The estimated LST showed that rock bodies, bare soils and built-up areas exhibit higher surface temperatures, while water bodies, agricultural croplands and dense vegetations have lower surface temperatures during the daytime. The accuracy of the estimated LST was within ±2 °C. LST comparison of ASTER and MODIS with Landsat has a maximum difference of 2 °C. Strong correlation was found between LST and spectral radiance of band 6 of Landsat-7 ETM+. Result corroborates the fact that surface temperatures over land use/land cover types are greatly influenced by the amount of vegetation present.     

Sub-pixel mineral mapping of a porphyry copper belt using EO-1 Hyperion data

The main aim of the present study was to examine the feasibility of the EO-1 Hyperion data in discriminating and mapping diagnostic alteration minerals around porphyry copper deposits (PCDs), verified by field surveys and laboratory analyses. A partial sub-pixel method, mixture tuned matched filtering (MTMF), was implemented on a pre-processed and calibrated Hyperion dataset. The tested area is situated at the Central Iranian Volcano-Sedimentary Complex, where abundant porphyry copper deposits like Sarcheshmeh, Darrehzar, and Sereidun are located. The characteristic alteration minerals identified by Hyperion data included biotite, muscovite, illite, kaolinite, goethite, hematite, jarosite, pyrophyllite, and chlorite. Discrimination of these minerals especially biotite and iron oxide (hematite and goethite) can provide valuable evidences for PCD exploration projects. Results revealed that Hyperion data prove to be powerful in discriminating and mapping various types of alteration zones while the data were subjected to adequate pre-processing.     

ASTER spectral sensitivity of carbonate rocks – Study in Sultanate of Oman

Remote sensing satellite data plays a vital role and capable in detecting minerals and discriminating rock types for explorations of mineral resources and geological studies. Study of spectral absorption characters of remotely sensed data are under consideration by the exploration and mining companies, and demonstrating the spectral absorption characters of carbonates on the cost-effective multispectral image (rather than the hyperspectral, Lidar image) for easy understanding of all geologists and exploration communities of carbonates is very much important. The present work is an integrated study and an outcome of recently published works on the economic important carbonate rocks, includes limestone, marl, listwaenites and carbonatites occurred in parts of the Sultanate of Oman. It demonstrates the spectral sensitivity of such rocks for simple interpretation over satellite data and describes and distinguishes them based on the absorptions of carbonate minerals in the spectral bands of advanced spaceborne thermal emission and reflection radiometer (ASTER) for mapping and exploration studies. The study results that the ASTER spectral band 8 discriminates the carbonate rocks due to the presence of predominantly occurred carbonate minerals; the ASTER band 5 distinguishes the limestones and marls (more hydroxyl clay minerals) from listwaenite (hydrothermally altered rock) due to the presence of altered minerals and the ASTER band 4 detects carbonatites (ultramafic intrusive alkaline rocks) which contain relatively more silicates. The study on the intensity of the total absorptions against the reflections of these rocks shows that the limestones and marls have low intensity in absorptions (and high reflection values) due to the presence of carbonate minerals (calcite and dolomite) occurred in different proportions. The listwaenites and carbonatites have high intensity of absorptions (low reflection values) due to the occurrence of Mn-oxide in listwaenites and carbonates in carbonatites apart the influence of major carbonate minerals that occurred predominantly in these rocks. The study of ASTER thermal infrared (TIR) spectral bands distinguished the marls have low emissivity of energy due to the presence of hydroxyl bearing alumina-silicate minerals from the other rocks such as limestones, listwaenites and carbonatites which have high emissivity due to the absence of hydroxyl bearing alumina-silicate minerals and the presence of carbonate minerals and carbonates.     

Mapping hydrothermal alteration zones and lineaments associated with orogenic gold mineralization using ASTER data: A case study from the Sanandaj-Sirjan Zone,Iran

The Sanandaj-Sirjan Zone (SSZ) is considered as an important region for gold exploration in the western sector of Iran. Its mountainous topography and unpaved routes make its study challenging for researchers and raise the costs for mining companies strating new exploration plans. Gold mineralization mainly occurs as irregular to lenticular sulfide-bearing quartz veins along shear zones in deformed mafic to intermediate metavolcanic and metasedimentary rocks. In this investigation, ASTER data are used for mapping hydrothermal alteration minerals and to better discriminate geological structural features associated with orogenic gold occurrences in the area. Image transformation techniques such as specialized band ratioing and Principal Component Analysis are used to delineate lithological units and alteration minerals. Supervised classification techniques, namely Spectral Angle Mapper (SAM) and Spectral Information Divergence (SID) are applied to detect subtle differences between indicator alteration minerals associated with ground-truth gold locations in the area. The directional filtering technique is applied to help in tracing along the strike the different linear structures. Results demonstrate that the integration of image transformation techniques and supervised classification of ASTER data with fieldwork and geochemical exploration studies has a great efficiency in targeting new prospects of gold mineralization in the SSZ. The approach used in this research provides a fast, cost-efficient means to start a comprehensive geological and geochemical exploration programs in the study area and elsewhere in similar regions.     

Spectral transformation of ASTER and Landsat TM bands for lithological mapping of Soghan ophiolite complex,south Iran

Spectral transformation methods, including correlation coefficient (CC) and Optimum Index Factor (OIF), band ratio (BR) and principal component analysis (PCA) were applied to ASTER and Landsat TM bands for lithological mapping of Soghan ophiolitic complex in south of Iran. The results indicated that the methods used evidently showed superior outputs for detecting lithological units in ophiolitic complexes. CC and OIF methods were used to establish enhanced Red–Green–Blue (RGB) color combination bands for discriminating lithological units. A specialized band ratio (4/1, 4/5, 4/7 in RGB) was developed using ASTER bands to differentiate lithological units in ophiolitic complexes. The band ratio effectively detected serpentinite dunite as host rock of chromite ore deposits from surrounding lithological units in the study area. Principal component images derived from first three bands of ASTER and Landsat TM produced well results for lithological mapping applications. ASTER bands contain improved spectral characteristics and higher spatial resolution for detecting serpentinite dunite in ophiolitic complexes. The developed approach used in this study offers great potential for lithological mapping using ASTER and Landsat TM bands, which contributes in economic geology for prospecting chromite ore deposits associated with ophiolitic complexes.     

Nonlinear mixture model of mixed pixels in remote sensing satellite images based on Monte Carlo simulation

A nonlinear mixture model for the interpretation of mixed pixels in remote sensing satellite images is proposed. The proposed model is a Monte Carlo ray-tracing model that takes into account interactions among the ground cover materials (multiple reflections among the materials on the surface). The proposed model also takes into account topographic features (slope) of the ground surface. As an example, Top of the Atmosphere (TOA) radiance of mixed pixels of forested areas which are composed of grasses and trees are simulated with the proposed model and compared to actual remote sensing satellite data of ASTER/VNIR over these forested areas. It was found that the influence due to multiple scattering interactions between trees depends on the tree distance and ranges from 8% to 10%. It is also found that the proposed model is useful to interpret mixed pixels. Namely, it is suggested that actual reflectance of the trees is higher than apparent reflectance that is calculated with the satellite data. Also it is suggested that it is possible to estimate forest parameters such as tree distance, tree shape.     

Integrating aeromagnetic data and Landsat-8 imagery for detection of post-accretionary shear zones controlling hydrothermal alterations: The Allaqi-Heiani Suture zone,South Eastern Desert,Egypt

The Arabian-Nubian Shield (ANS) underwent a regional carbonation event with CO₂ fluxes derived from the mantle and circulated along post-accretionary shear zones, thus affecting the redistribution of gold mineralization. Formerly, the analyses of remotely-sensed data have suggested regions of gold mineralization linked to the post-accretionary structured framework, but the results were insufficient for detailed prospecting in the ANS. In this research, aeromagnetic data and Landsat-8 imagery were integrated for delineating new high potential zones of gold mineralization in the Allaqi-Heiani Suture (AHS) zone, the ANS, South Eastern Desert (SED) of Egypt. Aeromagnetic data were enhanced using the Center for exploration targeting (CET) grid enhancement technique to detect the main structures that control hydrothermal alterations in the study area. Principal Component Analysis (PCA) technique and ratios of spectral bands were applied to Landsat-8 data for mapping zones of hydrothermal alteration associated with gold mineralization. The traced structural elements from RTP, CET and Landsat-8 maps were statistically plotted and interpreted using rose diagrams. These diagrams indicated that the NW and NE trends are the most dominant in the RTP map and that the intersection zones obtained from the CET analysis are aligned along the NW-oriented trend. While the NNW, WNW and NE trends were the most dominant ones in Landsat maps. The integration of the results indicates several new high potential zones of gold and Cu/Ni mineralization types, which are mostly concentrated at the western part of the AHS zone. The hydrothermal alteration zones and associated gold mineralization are strongly linked to NW, NE, E-W and WNW trending lineaments. The approach used in this study can be applied to other parts of the ANS and other regions with similar geological conditions around the world.     

Landsat image data quality studies

The July 1982 launch of Landsat-4 was immediately followed by a two-year comprehensive set of detailed investigations sponsored by the National Aeronautics and Space Administration (NASA) at Goddard Space Flight Center (GSFC). The Landsat Image Data Quality Analysis (LIDQA) research plans for these investigations were specified prior to launch, so that minimum time would be lost in assessing the performance of the long-awaited Thematic Mapper (TM) sensor that Landsat-4 carried in addition to a fourth Multispectral Scanner (MSS). The LIDQA investigations have been substantially completed, and have shown that the TM is a very good spaceborne multispectral radiometer, and has met or exceeded most of its design goals. TM's new short-wave infrared (SWIR) spectral capability yielded improved mineral and plant discrimination compared to the MSS, as anticipated by ground-based and airborne TM simulations. Moreover, the improved spatial resolution and geometric accuracy of Landsat-4 and the TM have resulted in satellite image maps exceeding 1:100,000 U.S. map accuracy standards. Finally, based on an information entropy measure, principal component analysis, and classification results, TM data has been shown to approach its theoretical limit in information content per pixel, exceeding the MSS by at least a factor of two.     

A strategy for mineral and energy resource independence

Data acquired by Landsats 1, 2, and 3, are beginning to provide the information on which an improved mineral and energy resource exploration strategy can be based. Landsat 4 is expected to augment this capability with its higher resolution (30 m) and additional spectral bands in the Thematic Mapper (TM) designed specifically to discriminate clay minerals associated with mineral alteration. In addition, a new global magnetic anomaly map, derived from the recent Magsat mission, has recently been compiled by the National Aeronautics and Space Administration (NASA), the U.S. Geological Survey (USGS), and others. Preliminary, extremely small-scale renditions of this map indicate that global coverage is nearly complete and that the map will improve upon a previous one derived from Polar Orbiting Geophysical Observatory (POGO) data. Digital processing of the Landsat image data and Magsat geophysical data can be used to create three-dimensional stereoscopic models for which Landsat images provide surface reference to deep structural anomalies.Comparative studies of national Landsat lineament maps, Magsat stereoscopic models, and metallogenic information derived from the Computerized Resources Information Bank (CRIB) inventory of U.S. mineral resources, provide a way of identifying and selecting exploration areas that have mineral resource potential. Landsat images and computer-compatible tapes can provide new and better mosaics and also provide the capability for a closer look at promising sites.     

Prediction of landslides using ASTER imagery and data mining models

The aim of this study was to identify landslide-related factors using only remotely sensed data and to present landslide susceptibility maps using a geographic information system, data-mining models, an artificial neural network (ANN), and an adaptive neuro-fuzzy interface system (ANFIS). Landslide-related factors were identified in Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) satellite imagery. The slope, aspect, and curvature of topographic features were calculated from a digital elevation model that was made using the ASTER imagery. Lineaments, land-cover, and normalized difference vegetative index layers were also extracted from the imagery. Landslide-susceptible areas were analyzed and mapped based on occurrence factors using the ANN and ANFIS. The generalized bell-shaped built-in membership function of the ANFIS was applied to landslide susceptibility mapping. Analytical results were validated using landslide test location data. In the validation results, the ANN model showed 80.42% prediction accuracy and the ANFIS model showed 86.55% prediction accuracy. These results suggest that the ANFIS model has a better performance than does the ANN in predicting landslide susceptibility.     

Mapping of hydrothermally altered rocks using airborne multispectral scanner data,Marysvale, Utah,mining district

Multispectral data covering an area near Marysvale, Utah, collected with the airborne National Aeronautics and Space Administration (NASA) 24-channel Bendix multispectral scanner, were analyzed to detect areas of hydrothermally altered, potentially mineralized rocks. Spectral bands were selected for analysis that approximate those of the Landsat 4 Thematic Mapper and which are diagnostic of the presence of hydrothermally derived products. Hydrothermally altered rocks, particularly volcanic rocks affected by solutions rich in sulfuric acid, are commonly characterized by concentrations of argillic minerals such as alunite and kaolinite. These minerals are important for identifying hydrothermally altered rocks in multispectral images because they have intense absorption bands centered near a wavelength of 2.2 μm. Unaltered volcanic rocks commonly do not contain these minerals and hence do not have the absorption bands.A color-composite image was constructed using the following spectral band ratios: 1.6μm/2.2μm, 1.6μm/0.48μm, and 0.67μm/1.0μm. The particular bands were chosen to emphasize the spectral contrasts that exist for argillic versus non-argillic rocks, limonitic versus nonlimonitic rocks, and rocks versus vegetation, respectively. The color-ratio composite successfully distinguished most types of altered rocks from unaltered rocks. Some previously unrecognized areas of hydrothermal alteration were mapped. The altered rocks included those having high alunite and/or kaolinite content, siliceous rocks containing some kaolinite, and ash-fall tuffs containing zeolitic minerals. The color-ratio-composite image allowed further division of these rocks into limonitic and nonlimonitic phases. The image did not allow separation of highly siliceous or hematitically altered rocks containing no clays or alunite from unaltered rocks.A color-coded density slice image of the 1.6μm/2.2μm band ratio allowed further discrimination among the altered units. Areas containing zeolites and some ash-fall tuffs containing montmorillonite were readily recognized on the color-coded density slice as having less intense 2.2-μm absorption than areas of highly altered rocks. The areas of most intense absorption, as depicted in the color-coded density slice, are dominated by highly altered rocks containing large amounts of alunite and kaolinite. These areas form an annulus, approximately 10 km in diameter, which surrounds a quartz monzonite intrusive body of Miocene age. The patterns of most intense alteration are interpreted as the remnants of paleohydrothermal convective cells set into motion during the emplacement of the central intrusive body.     

Modeling urban heat islands in heterogeneous land surface and its correlation with impervious surface area by using night-time ASTER satellite data in highly urbanizing city,Delhi-India

The present study is an assessment and identification of urban heat island (UHI) in the environment of one of the fastest urbanizing city of India, Delhi Metropolis, employing satellite image of ASTER and Landsat 7 ETM+ in the thermal infrared region 3–14 μm. Temporal (2001 and 2005) ASTER datasets were used to analyze the spatial structure of the thermal urban environment subsequently urban heat island (UHI) in relation to the urban surface characteristics and land use/land cover (LULC). The study involves derivation of parameters governing the surface heat fluxes, constructing statistics of ASTER thermal infrared images along with validation through intensive in situ measurements. The average images reveal spatial and temporal variations of land surface temperature (LST) of night-time and distinct microclimatic patterns. Central Business District (CBD) of Delhi, (Connaught Place, a high density built up area), and commercial/industrial areas display heat islands condition with a temperature greater than 4 °C compared to the suburbs. The small increase in surface temperature at city level is mainly attributed to cumulative impact of human activities, changes in LULC pattern and vegetation density. In this study the methodology takes into account spatially-relative surface temperatures and impervious surface fraction value to measure surface UHI intensity between the urban land cover and rural surroundings. Both the spatial and temporal variation in surface temperature associated with impervious surface area (ISA) has been evaluated to assess the effect of urbanization on the local climate.     

Use of the ASTER satellite images for evaluation of structural changes in the Popocatépetl volcano related to microseismicity

Mexico is one of the most volcanically active regions in North America. Volcanic activity in central Mexico is associated with the subduction of the Cocos and Rivera plates beneath the North American plate. Periods of enhanced microseismic activity, associated with the volcanic activity of the Popocatépetl volcano are compared with periods, during which the microseismic activity was low. We detected systematical changes in the number of lineaments, associated with the microseismic activity due to lineament analysis of a temporal sequence of high resolution satellite images of the Popocatépetl volcano, provided by the ASTER/VNIR instrument. The Lineament Extraction and Stripes Statistic Analysis (LESSA) software package was used for the lineament extraction. In the future it would allow develop a methodology for detection of possible elevation of pressure in volcano edifice.     

Built-up land mapping capabilities of the ASTER and Landsat ETM+ sensors in coastal areas of southeastern China

Worldwide urbanization has accelerated expansion of urban built-up lands and resulted in substantial negative impacts on the global environments. Precisely measuring the urban sprawl is becoming an increasing need. Among the satellite-based earth observation systems, the Landsat and ASTER data are most suitable for mesoscale measurements of urban changes. Nevertheless, to date the difference in the capability of mapping built-up land between the two sensors is not clear. Therefore, this study compared the performances of the Landsat-7 ETM+ and ASTER sensors for built-up land mapping in the coastal areas of southeastern China. The comparison was implemented on three date-coincident image pairs and achieved by using three approaches, including per-band-based, index-based, and classification-based comparisons. The index used is the Index-based Built-up Index (IBI), while the classification algorithm employed is the Support Vector Machine (SVM). Results show that in the study areas, ETM+ and ASTER have an overall similar performance in built-up land mapping but also differ in several aspects. The IBI values determined from ASTER were consistently higher than from ETM+ by up to 45.54% according to percentage difference. The ASTER also estimates more built-up land area than ETM+ by 5.9–6.3% estimated with the IBI-based approach or 3.9–6.1% with the SVM classification. The differences in the spectral response functions and spatial resolution between relative spectral bands of the two sensors are attributed to these different performances.