超声马达工作性能影响因素的研究

系统阐述在超声马达的设计、制作过程中的机构设计、制作工艺、驱动电源等方面的关键问题。重点讨论超声振子的粘接技术,振子参数优化设计的方法,以及驱动电源的匹配和频率自动跟踪设计,最终设计出高性能的超声马达。     

Communication system architecture for planetary exploration

Future human missions to Mars will require effective communications supporting exploration activities and scientific field data collection. Constraints on cost, size, weight, and power consumption for all communications equipment make optimization of these systems very important. These information and communication systems connect people and systems together into coherent teams performing the difficult and hazardous tasks inherent in planetary exploration. The communication network supporting vehicle telemetry data, mission operations, and scientific collaboration must have excellent reliability and flexibility. We propose hybrid communication architectures consisting of space-based links, a surface-based deployable mid-range communications network and a cluster of short-range links to solve the problems of connectivity and bandwidth, while meeting the other constraints of weight and power. A network of orbiting satellites could cover much of the planet surface, but this space-based capability may not be optimal for cost or performance. Specifically, a minimal space-based capability can be augmented using mobile cellular repeaters deployable by robots and human EVA. This method results in an increase in the number of radio nodes, but the distances separating them is decreased. This results in a significant increase in bandwidth and decrease in radio power, and therefore, node size, complexity, and power consumption. This paper will discuss the results of field testing such hybrid radio systems for the support of scientific surveys. System analysis of design tradeoffs will yield insight into optimal solutions that will be compared to other approaches providing a method of effectively evaluating new candidate architectures     

Disaster monitoring and mitigation using aerospace technologies and integrated telecommunication networks

How space technologies and new integrated telecommunication networks can mitigate the impact of natural and man-made disasters. The objective is to design new, potentially attractive telecommunication architectures to better manage a disaster scenario. The strengths and the weaknesses of the proposed space-based telecommunication architectures for the emergency and recovery will be outlined also, to individuate the needs for an optimal provision of information and accessibility of space-related services in case of disaster.     

Electrical power distribution on space based radar satellites

The radar payload on a space-based radar (SBR) satellite could require tens of kilowatts of power distributed to many small loads over a large area. This poses special problems for the power distribution and control system (PDCS). A study that examined the power requirements of an SBR spacecraft is reported. A baseline prime power system, generating about 30 kW, was derived. The proposed distribution network would transmit 240 V at 20 kHz. The voltage would be downconverted in one converter for about 100 transmit/receive modules. The design considerations are discussed, and the baseline PDCS is described     

天基测控系统应用发展趋势探讨

基于中继卫星的天基测控系统将在我国航天测控系统中扮演越来越重要的角色,研究天基测控系统应用发展趋势,对支撑天基测控系统发展、引导技术及应用研究都有着重要意义。本文从我国基于中继卫星的天基测控系统应用需求分析入手,介绍了国内外天基测控系统应用现状,对我国天基测控系统应用发展趋势和相关关键技术进行了深入探讨,指出今后应加强中继链路设计分析与模拟验证工作,建议重点开展抗干扰抗截获技术、更高码速率传输技术以及多用户网络化技术等关键技术的研究和应用。     

漂浮基空间机器人捕获卫星过程动力学模拟及捕获后混合体运动的RBF神经网络控制

 讨论了漂浮基空间机器人在轨捕获目标卫星过程的碰撞动力学建模,以及捕获操作结束后空间机器人与卫星混合体的稳定控制问题。首先采用多刚体动力学建模方法并结合空间机器人捕获目标卫星过程中的碰撞动力学特性,建立了漂浮基空间机器人在轨捕获漂浮卫星过程的动力学模型,并在此基础上计算出完成捕获操作后空间机器人与目标卫星混合体关节的运动速度。然后针对卫星及空间机器人系统惯性参数均是未知的复杂情况,应用上述模型、神经网络控制理论和Lyapunov稳定性理论,设计了空间机器人与卫星混合体在捕获过程碰撞冲击影响下稳定运动的高斯径向基函数神经网络控制方案,以达到对捕获卫星的有效控制。此外,高斯径向基函数神经网络控制方案具有不需要测量和反馈载体位置、移动速度与加速度的显著优点。系统数值仿真证实了上述控制方案的有效性。     

Power beaming providing a space power infrastructure

A study based on two levels of technology maturity, which applies to the power beaming concept to four planned satellite constellations, is described. The analysis shows that with currently available technology, power beaming can provide mass savings to constellations to orbits ranging from low-Earth orbit to geosynchronous orbit. Two constellations, a space surveillance and tracking system and space-based radar, can be supported with current technology. The other two constellations, a space-based laser array and a boost surveillance and tracking system, will require power and transmission system improvements before their break-even specific mass is achieved. A doubling of SP-100 conversion efficiency from 10 to 20% would meet or exceed break-even for these constellations     

Design Optimization for a Half-Bridge DC-DC Converter

A nonlinear programming technique using the penalty function method is employed for the minimum weight design of a halfbridge dc-dc buck power converter. The cost-effective computeraided approach provides a minimum weight design down to the details of the component level which concurrently meets all power circuit performance requirements. Important design insights and guidelines are obtained to readily assess 1) the tradeoffs between weight and loss as the switching frequency is increased, 2) the optimum operating frequency range over which the total weight/loss is minimized, 3) the impact of device characteristics on the total weight and loss profile.     

炭/炭复合材料快速制备工艺研究进展

综合评述国内外研制的几种快速制备工艺:快速定向流动CVI工艺、压力强制流CVI工艺、复合感应加热热梯度CVI工艺、液相气化CVI工艺和直热CVI工艺等,阐述了其快速制备炭/炭复合材料的工艺原理和主要研究成果,并分析了目前炭/炭复合材料快速制备工艺研究中存在的问题及发展趋势。     

具有时延的漂浮基空间机器人基于泰勒级数预测、逼近的改进非线性反馈控制

 探讨了本体位置与姿态均不受控的漂浮基空间机器人在时间延迟(简称时延)情况下惯性空间轨迹跟踪的控制问题.利用拉格朗日方法并结合系统动量守恒关系,分析、建立了漂浮基空间机器人完全能控形式的系统动力学模型及运动Jacobi关系.以此为基础,针对系统存在时延的情况,利用泰勒级数预测、逼近的方法,建立了适用于时延情况下控制系统设计的数学模型.利用该模型,提出了一种空间机器人在时延情况下的改进非线性反馈控制方案.然后运用Lyapunov第二类方法,结合范数以及图形分析的方法证明了在时延情况下整个闭环控制系统的渐近稳定性.文中提到的控制方案能够有效地克服系统存在时延的影响,控制漂浮基空间机器人末端爪手跟踪惯性空间的期望轨迹.系统数值仿真结果证明了上述控制方案的有效性与精确性.     

Optimization and Sizing for Propulsion System of Liquid Rocket Using Genetic Algorithm

Flight vehicle conceptual design appears to be a promising area for application of the Genetic Algorithm (GA) as an approach to help to automate part of the design process. This computational research effort strives to develop a propulsion system design strategy for liquid rocket to optimize take-off mass, satisfying the mission range under the constraint of axial overload. The method by which this process is accomplished by using GA as optimizer is outlined in this paper. Convergence of GA is improved by introducing initial population based on Design of Experiments Technique.     

Multi-functional SiC/AI Composites for Aerospace Applications

Multi-functional Al-matrix composites with high volume fraction (55%-57%) of SiC particles are produced with the new pres-sureless infiltration fabrication technology, X-ray detection and microscopic observation display the composites which are macroscopi-tally homogeneous without porosity. The investigation further reveals that the SiC/Al composites possess low density (2.94 g/cm3), high elastic modulus (220 GPa), prominent thermal management function as a result of low coefficient of thermal expansion (8 × 10-6 K-1) and techniques, the multi-functional SiC/Al composites have managed to be made into near-net-shape parts. Many kinds of precision com-ponents of space-based optomechanical structures and airborne optoelectronic platform have been turned out. Of them, several typical products are being under test in practices.     

直流28V2A固态功率控制器的初步设计

固态功率控制器是利用功率型固体器件的导通与截止来控制功率电路的通断。本文提出了额定断开电压为直流28V,额定导通电流为2A 安的固态功率控制器的一种具体电路的设计。对电路的原理及元件选择作了说明和分析,采用消颤抖电路可消除由于机械开关触头的颤抖而引起的误动作,提高电路的可靠性。     

Impact Potential of New Power Electronic Technologies

New technological advances in the area of power electronics are having an increasing impact on the design of aerospace control systems. These next generation power components promise improved system performance through increased electronic efficiencies. Applying state-of-the-art packaging concepts as an integral part of the system design will allow these devices to be utilized in a space efficient and reliable manner. The first portion of this paper looks at two such next generation components. The first is a High Voltage Integrated Circuit (HVIC) that provides a bridge between the low voltage controller logic and the high voltage motor winding invertor. This device achieves size reduction and an increase in reliability through integration of low and high voltage logic networks on a single integrated circuit. The second is the Insulated Gate Transistor (IGT). This device provides a high voltage switch with MOS-like drive characteristics. The present and future expectations of these power devices are discussed. This paper then looks at new packaging techniques for power devices. The impact of parasitic circuit effects have significant impact on power circuit performance. Finally, this paper looks at an example control application. The design is that of a permanent magnet motor driven actuator. The drive motor uses 270 vdc for supply voltage. Within the intelligent system controller, is the capability to control the current demands of the motor. The new power electronics devices are making the design feasible in both thermal and volume efficiency. This topic includes projected controller sizing into the 1990s.     

UC3843控制多路输出开关电源设计与实现

介绍了采用UC3843控制器的单端反激式开关电源的设计与实现,讲述了UC3843控制器内部电路及其特点,通过具体的多路输出开关电源设计实例分析了设计的主要步骤以及实际设计中应注意的问题,并提出了抑制噪声的措施,最后给出了该电源的性能测试数据。     

Nanotechnology-based molecular test equipment (MTE)

This paper describes original research efforts in the design, simulation, and development of nanotechnology-based molecular test equipment (MTE). This is a research effort for testing printed circuit boards independent of traditional automatic test equipment (ATE) through the fabrication of MTE within integrated circuits (ICs). The MTE is embedded within the IC substrate and encapsulated within nanoprobes that connect between the surface and the substrate of the IC at various functional areas. A process is followed whereby IC device simulation is performed to assess the electrical, chemical, and structural properties of integrated and adjacent substrate devices. Through this approach the nominal and failed device performance parameters of interest to substrate-based MTE are found. Discussion of the development and application of MTE within IC architectures is provided, including such topics as the effect of substrate composition on the design and realization of MTE, interfaces between MTE and IC devices, and reporting of MTE results to the IC surface and technician. Potential application areas within different device functions will also be identified. A chemical structure diagram is also provided to illustrate the implementation of MTE using discrete device configurations with MTE-augmented logic     

Parametric cost model for solar space power and DIPS systems

A detailed cost model has been developed to parametrically determine the program development and production cost of photovoltaic, solar dynamic, and dynamic isotope (DIPS) space power systems. The model is applicable in the net electrical power range of 3 to 300 kWe for solar power and 0.5 to 10 kWe for DIPS. Application of the cost model allows spacecraft or space-based power system architecture and design trade studies or budgetary forecasting and cost benefit analyses. The cost model considers all major power subsystems (i.e., power generation, power conversion, energy storage, thermal management, and power management/distribution/control). It also considers system cost effects such as integration, testing, and management. The cost breakdown structure, model assumptions, ground rules, bases, cost estimation relationship format, and rationale are presented, and the application of the cost model to 100-kWe solar space power plants and to a 1.0-kWe DIPS is demonstrated     

电源端口电磁脉冲防护方法研究

为了解决电源端口在不同电磁脉冲条件下的防护问题，提出了一种适用于多种电磁脉冲防护设计方 法。该方法能依据不同电磁脉冲波形精准指导防护电路设计；该方法使用CST 对电源端口电源线及电路建模 进行仿真分析；利用其电磁仿真结果，设计防护电路；并采用数值计算方法对防护电路中的防护器件瞬态电压 抑制器进行精准设计，可保证瞬态电压抑制器本身及后级电路不发生损坏，可为电源端口防护不同电磁脉冲提 供理论依据。     

“Dakota Sun”-the next generation solar powered racingvehicle

Based on the experience gained from Sunrayce '95, the Solar Motion Team has made many changes to the design of the next generation solar car. These changes have resulted in a vehicle that is very different from the “Solar Rolar”, The Dakota Sun is a three wheeled vehicle with separate cab and solar array. This design allows for improved aerodynamics, decreased weight, lower rolling resistance, and ease of manufacture compared to the four wheeled catamaran used in the last race. However, this design sacrifices total enclosed wheel base area, additional room for components, and added power from side solar panels, The major objectives for the team's redesigned Sunrayce '97 entry are: systems integration; decrease the weight of the car; decrease aerodynamic drag; more efficient use of available energy; and increased driver safety. The team has set a standard to use the latest available technology. Although this increases the complexity of the components, by using a systems engineering approach the “Dakota Sun” has evolved into a more integrated vehicle. This philosophy of integrated design has resulted in great improvements in mechanical design and manufacturing techniques, as well as electrical innovations. The major design changes evident from the original Sunraycen '95 vehicle are the result of an evolutionary design process that has produced the highly competitive Sunraycel '97 design outlined in this article     

天基对地打击武器空间机动过程分析

天基对地打击武器是一种新的战略威慑力量,与地基发射的武器相比具有自己独特的优势。首先通过对天基武器作战过程的分析,得出在轨机动是实现天基快速对地打击的关键的结论;而后建立了天基平台的轨道面机动与相位机动的数学模型。在上述研究的基础上,通过数学仿真分析了轨道机动对打击时间的影响,得到了一些有用的基本结论。