Three-axis CNC Machining Technique for Hyperboloid Thin-walled Framed Parts

某型飞机结构框为薄壁框,零件尺寸较大,形状复杂,内外形根据理论外形的特征呈闭互补特征;薄壁整体框板3轴联动数控加工较困难,一般采用五轴联动数控加工.本文主要介绍了3轴联动数控加工技术在该框上的应用,提出了双曲面筋条薄壁整体框板零件的加工方案.     

某框基于后置程序逆向设计及数字化高效加工研究

介绍了飞机某框从逆向设计到数字化高效加工详细流程,应用以CATIA V5、VERICUT为代表的先进数字化制造技术,使零件数字化设计、数字化加工、工艺流程得到全面改进,为今后零件逆向设计及数字化加工奠定良好的基础。     

钣金框板零件的精密制造工艺

介绍了钣金框板零件的制造工艺,并结合公司ＭＤ８０转包生产中的大尺寸,高精度框板零件详细介绍了具体的精密制造工艺,对框板类零件的精密制造具有较强的指导作用。     

S92型机框梁类零件高效数控加工技术

根据S92型机批生产需要,本文分析了框类零件高效数控加工过程中涉及的相关问题,并从机床与刀具选择、加工方案、编程策略、加工参数、加工难点、仿真纠错等方面论述了结构件高质高效加工中的应用技术.     

数控加工飞机装配型架卡板

数控加工飞机装配型架卡板是飞机设计制造一体化技术的一个环节。这次选择了前机身9～15框侧壁骨架装配型架和1～9框侧壁装配型架的卡板作为加工对象,所加工的型架卡板已在生产中使用。这两台型架卡板的工作面,与进气道理论外形一致或差一个蒙皮厚度。根据所建立的数     

不锈钢管板小群孔加工技术

分析了不锈钢管板加工的难点,介绍了机床和钻头的选择及优化切削参数,获得较好的技术经济效果.     

燃油跨多隔舱流动及晃动特性分析

为获得输油过程中燃油流通能力及弹射起飞激励下的晃动特征,通过采用有限点集法对多隔舱油箱进行了数值模拟。研究结果表明：有限点集法可以清晰捕获燃油流动和晃动的自由液面特征。油箱载油量影响晃动的程度,油量减少则液面变化剧烈,重心发生大范围移动。隔舱框板的开孔面积是影响流通能力的重要因素,当其在±10%范围内变化时,流动阻力及能量耗散差异显著,这在一定程度上揭示了框板开孔与晃动抑制之间的内在机理,为多隔舱框板的工程设计和流体晃动阻尼理论研究提供重要参考。     

UG软件系统在某框数控加工中的应用

２４５０框是机身的主要受力构件，尺寸大，形状复杂，加工困难。本文主要介绍采用ＵＧ软件对该框进行数控编程的方法，以及编程中对几个主要技术问题的解决。     

10060框的数控加工

１００６０框是一项较为典型的整体框类零件，其数控加工难度较大，目前国内尚无该类零件加工的先例。本文较为详细地介绍了１００６０框数控加工程序的编制与验证等加工过程，以及在加工过程中所应用的一些新技术。     

大型铝合金框梁结构航空模锻件淬火残余应力分析

开展了新型7085铝合金材料高温拉伸试验,得到了其基本性能参数与力学模型,运用ABAQUS有限元软件对7085铝合金框梁结构航空模锻件淬火过程进行了数值仿真,研究了淬火工艺参数与方式对残余应力分布规律的影响.研究表明:框梁结构航空模锻件淬火残余应力主要集中于腹板与筋板交汇处,呈现外压内拉的分布特点;淬火温度对残余应力有显著影响,提高淬火温度可有效降低残余应力;固溶温度对淬火残余应力的影响较小,对于大尺寸框梁模锻件,入水方式及转移时间对淬火残余应力的影响甚微.     

带有不确定因素的最优拦截制导律

本文从微分对策观点出发,利用极小极大原理讨论了带有不确定因素的最优拦截制导律。在选择特定的过渡时间时,最优拦截制导律具有综合形式。仍由二部分组成:一部分是变系数比例导航,另一部分是与导弹加速度有关的修正项。     

Optimum FFT-based frequency acquisition with application toCOSPAS-SARSAT

In the case of a single sinusoid or multiple well-separated sinusoids, a coarse estimator consisting of a windowed Fourier transform followed by a fine estimator which is an interpolator is a good approximation to an optimal frequency acquisition and measurement algorithm. The design tradeoffs are described. It is shown that for the fine-frequency estimator a good method is to fit a Gaussian function to the fast-Fourier-transform (FFT) peak and its two neighbors. This method achieves a frequency standard deviation and a bias in the order of only a few percent of a bin. In the case of short-time stationarity, for a moderate number of averages and for an adaptive threshold detector, only between 0.5 and 1 dB is lost when averaging is traded off for FFT length, in contrast to the asymptotic result of 1.5 dB. The COSPAS-SARSAT satellite system for emergency detection and localization is used to illustrate the concepts. The algorithm is analyzed theoretically, and good agreement is found with test results     

Measurement of Distributed Targets with the Random Signal Radar

A model of a distributed target as a collection of independent, Poisson distributed point scatterers or scattering centers in a range-velocity target space is introduced and is characterized by a deterministic function called the ?scatterer density function.? This function is the density of the point scatterers in the range-velocity space and can be estimated in a relatively straightforward manner by any radar having adequate resolution in both range and velocity and no ambiguities in the region occupied by the distributed target. The use of the random signal radar with a correlator receiver is considered here and the statistical properties of the correlator output, when the return signal is from a distributed target, are derived. It is shown that the spectral density is simply related to the scatterer density function. The technique is illustrated by an example in which the target is a tornado modeled as a cylinder with constant angular velocity. The example suggests that is a possible to remotely estimate the radar cross section per unit volume as a function of distance from the center of the tornado.     

高阶系统的降阶控制研究

本文根据线性随机系统的最优控制理论较详细地给出了利用优化技术对高阶系统进行降阶控制的理论分析,并对提高整个控制系统的稳定性提出了一种改进方法.最后对飞机机翼的最简模型——自由-自由梁的振动抑制进行了具体的计算,取得了较为满意的结果。     

机翼对自转旋翼机纵向稳定性的影响

为了研究机翼对自转旋翼机纵向稳定性的影响,针对某复合式自转旋翼机,建立了基于状态空间法描述的非线性全量方程数学模型。该模型包含自转旋翼、机身、螺旋桨、机翼和尾翼的气动模型、动态入流模型和稳定性分析模型。运用该模型对比研究了样例自转旋翼机和样例复合式自转旋翼机的纵向稳定性。研究结果表明：机翼的增加对于浮沉模态和短周期模态稳定性是有利的;对于旋翼转速模态稳定性是不利的,在设计复合式自转旋翼机时可以考虑增加旋翼桨尖配重来提高此模态的稳定性。机翼的纵向位置对自转旋翼机的纵向稳定性有显著影响。在机翼纵向位置能满足配平约束条件下,机翼纵向位置越靠后,迎角稳定性越好,但旋翼转速稳定性越差。在设计复合式自转旋翼机时,机翼纵向位置的选择要综合考虑这两个因素进行折中。     

On the Optimization of MTI Clutter Rejection

In this paper is formulated the problem of optimization of the improvement factor of a nonrecursive MTI by minimization of a quadratic form. The minimum normalized clutter output (a reciprocal of the average improvement factor) is the minimum eigenvalue of this quadratic form, and the corresponding eigenvector is the optimal weight to be used in this filter. By use of classic matrix theory, some properties of this MTI improvement factor are shown, namely, that it is bounded and is a monotonic function of the clutter spectrum variance. Also discussed is the limit of an MTI system having a large number of cancellers. Finally, the problem of a staggered-PRF MTI filter is examined, for which it is shown that its improvement factor is bounded by two equivalent constant-PRF MTI systems. One of these systems has a PRF equal to the lowest PRF of the staggered-PRF system, while the other has a PRF equal to the highest PRF of the staggered system.     

轮盘低周疲劳寿命的可靠性研究

利用R.W.Landgraf的低周疲劳寿命公式, 建立累积损伤的低周疲劳寿命的失效方程, 以此方程为基础利用H-L方法求其可靠度。推导了在非线性的弹塑性状况下的随机有限元法, 从而使低周疲劳寿命可靠性得以计算。      

基于“虚拟范围”的多机器人围捕算法

 讨论了基于SQL Server数据库的栅格地图建立方法。介绍了一种建立在势场法和栅格地图上的室外多机器人路径规划方法，分析了在已知地图中应用势场法进行路径规划时的路径死点和规划失败问题，并给出了解决方法。以势场栅格法为基础探讨了多机器人协作围捕动态目标的策略。在围捕算法中，根据室外机器人工作环境的特点，提出了“虚拟范围”的概念，以减少动态规划次数，提高围捕速度。介绍了机器人以“虚拟范围”为基准，在各种状态之间的转换机制。利用基于无线局域网的室外多机器人系统进行了试验，试验表明引入“虚拟范围”之后能有效缩短围捕时间，并且存在最短时“虚拟范围”。
     

An Analysis of the Performance of the Oscillating Limiter Driven by FM Signals Corrupted by Noise

The behavior of the oscillating limiter (OL) driven by FM signals is surveyed, and its performance with signal corrupted by noise is investigated. For high values of the carrier-to-noise ratio (CNR), if the frequency deviation of the signal is small in comparison with the locking range of the OL, it is calculated, and experimentally verified, that a system OL discriminator is equivalent to a system bandpass limiter discriminator followed by a linear network whose frequency response has been specified. When the frequency deviation is not so small, the baseband noise power increases with it; a formula is given that allows the calculation of this power when the signal is such that the circuit operates in quasistationary fashion. For low values of the CNR, a mathematical analysis presents unsurmountable difficulties. However, heuristic argumentation leads to an interpretation of the operation of the OL in the threshold region, which is substantiated by an experimental investigation. The results of this paper enable a comparative evaluation of a system OL discriminator and a system bandpass limiter discriminator, to which the former reduces when the feedback path in the OL is open.     

Analysis of a Class of Nonlinear Sampled-Data Systems with a Gaussian Input Signal

The problem treated here is the analysis of a class of nonlinear sampled-data systems with a Gaussian input signal. The nonlinear element is a symmetrical limiter (memoryless device) that feeds the linear element. Preceding the limiter is a sampler and zero-order hold unit for data reconstruction. The analysis is predicated on finding an equivalent gain for the nonlinear element such that the mean-square error is a minimum. The nonlinearity is thus replaced by a linear component and the system is then analyzed by conventional techniques. It is also shown that for appropriate sampling rates the sampled-data system is equivalent to a continuous system due to the action of the sampler-hold combination. All calculations pertaining to the limiter input signal require the use of a transfer function that is interior to the feedback loop. However, in developing this transfer function, the overall system is considered so that the system output may be evaluated after the value of equivalent gain has been found.