Balloon support systems performance for the cosmic rays energetics and mass mission

The Ballooncraft Support Systems were developed by NASA Wallops Flight Facility for use on ULDB class balloon missions. The support systems have now flown two missions supporting the Cosmic Rays Energetics and Mass (CREAM) experiment. The first, CREAM I, flown in December 2004, was for a record breaking 41 days, 21 h, and the second flight flown in December 2005, was for 28 days, 9 h. These support systems provide CREAM with power, telecommunications, command, and data handling including flight computers, mechanical structures, thermal management, and attitude control to help ensure a successful scientific mission. This paper addresses the performance and success of these support systems over the two missions.     

Second generation prototype design and testing for a high altitude Venus balloon

This paper describes the development of a second generation prototype balloon intended for flight in the upper atmosphere of Venus. The design of this new prototype incorporates lessons learned from the construction and testing of the first generation prototype, including finite element analyses of the balloon stresses and deformations, measured leak performance after handling and packaging, permeability and optical property measurements on material samples, and sulfuric acid testing. An improved design for the second generation prototype was formulated based on these results, although the spherical shape and 5.5 m diameter size were retained. The resulting balloon has a volume of 87 m³ and is capable of carrying a 45 kg payload at a 55 km altitude at Venus. The design and fabrication of the new prototype is described, along with test data for inflation and leakage performance.     

Medical survey of European astronauts during Mir missions

This paper reviews the medical operations performed on six European astronauts during seven space missions on board the space station Mir. These missions took place between November 1988 and August 1999, and their duration ranged from 14 days to 189 days. Steps of pre-flight medical selection and flight certification are presented. Countermeasures program used during the flight, as well as rehabilitation program following short and long-duration missions are described. Also reviewed are medical problems encountered during the flight, post-flight physiological changes such as orthostatic intolerance, exercise capacity, blood composition, muscle atrophy, bone density, and radiation exposure.     

Prototype design and testing of a Venus long duration,high altitude balloon

This paper describes the design, fabrication and testing of a full scale prototype balloon intended for long duration flight in the upper atmosphere of Venus. The balloon is 5.5 m in diameter and is designed to carry a 45 kg payload at an altitude of 55 km. The balloon material is a 180 g/m² multi-component laminate comprised of the following layers bonded together from outside to inside: aluminized Teflon film, aluminized Mylar film, Vectran fabric and a polyurethane coating. This construction provides the required balloon functional characteristics of low gas permeability, sulfuric acid resistance and high strength for superpressure operation. The design burst superpressure is 39,200 Pa which is predicted to be 3.3 times the worst case value expected during flight at the highest solar irradiance in the mission profile. The prototype is constructed from 16 gores with bi-taped seams employing a sulfuric acid resistant adhesive on the outside. Material coupon tests were performed to evaluate the optical and mechanical characteristics of the laminate. These were followed by full prototype tests for inflation, leakage and sulfuric acid tolerance. The results confirmed the suitability of this balloon design for use at Venus in a long duration mission. The various data are presented and the implications for mission design and operation are discussed.     

Development of the High Altitude Student Platform

The High Altitude Student Platform (HASP) was originally conceived to provide student groups with access to the near-space environment for flight durations and experiment capabilities intermediate between what is possible with small sounding balloons and low Earth orbit rocket launches. HASP is designed to carry up to twelve student payloads to an altitude of about 36 km with flight durations of 15–20 h using a small zero-pressure polyethylene film balloon. This provides a flight capability that can be used to flight-test compact satellites, prototypes and other small payloads designed and built by students. HASP includes a standard mechanical, power and communication interface for the student payload to simplify integration and allows the payloads to be fully exercised. Over the last two years a partnership between the NASA Balloon Program Office (BPO), Columbia Scientific Balloon Facility (CSBF), Louisiana State University (LSU), the Louisiana Board of Regents (BoR), and the Louisiana Space Consortium (LaSPACE) has led to the development, construction and, finally, the first flight of HASP with a complement of eight student payloads on September 4, 2006. Here we discuss the primary as-built HASP systems and features, the student payload interface, HASP performance during the first flight and plans for continuing HASP flights. The HASP project maintains a website at http://laspace.lsu.edu/hasp/ where flight application, interface documentation and status information can be obtained.     

Time variations of cosmic-ray helium isotopes with BESS-Polar I

The Balloon-borne Experiment with a Superconducting Spectrometer (BESS) is configured with a solenoidal superconducting magnet and a suite of precision particle detectors, including time-of-flight hodoscopes based on plastic scintillators, a silica-aerogel Cherenkov detector, and a high resolution tracking system with a central jet-type drift chamber. The charges of incident particles are determined from energy losses in the scintillators. Their magnetic rigidities (momentum/charge) are measured by reconstructing each particle trajectory in the magnetic field, and their velocities are obtained by using the time-of-flight system. Together, these measurements can accurately identify helium isotopes among the incoming cosmic-ray helium nuclei up to energies in the GeV per nucleon region. The BESS-Polar I instrument flew for 8.5 days over Antarctica from December 13th to December 21st, 2004. Its long-duration flight and large geometric acceptance allow the time variations of isotopic fluxes to be studied for the first time. The time variations of helium isotope fluxes are presented here for rigidities from 1.2 to 2.5 GV and results are compared to previously reported proton data and neutron monitor data.     

Temperature effects in the ATIC BGO calorimeter

The Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment had a successful test flight and a science flight in 2000–01 and 2002–03 and an unsuccessful launch in 2005–06 from McMurdo, Antarctica, returning 16 and 19 days of flight data. ATIC is designed to measure the spectra of cosmic rays (protons to iron). The instrument is composed of a Silicon matrix detector followed by a carbon target interleaved with scintillator tracking layers and a segmented BGO calorimeter composed of 320 individual crystals totaling 18 radiation lengths to determine the particle energy. BGO (Bismuth Germanate) is an inorganic scintillation crystal and its light output depends not only on the energy deposited by particles but also on the temperature of the crystal. The temperature of balloon instruments during flight is not constant due to sun angle variations as well as differences in albedo from the ground. The change in output for a given energy deposit in the crystals in response to temperature variations was determined.     

Search for antihelium: Progress with BESS

In this paper, we report searches for antihelium in cosmic rays using two recently flown magnetic rigidity spectrometers. BESS-TeV had extended rigidity with an MDR of 1.4 TV and had a flight duration of one day. BESS-Polar was optimized for collecting power. It was flown for 8.5 days and had an MDR of 240 GV. The former flight allows us to explore a previously unexplored rigidity band and the latter flight yields a factor of three improvement in the overall BESS limit. No antihelium candidate was found in the rigidity ranges of 1–500 GV, and 0.6–20 GV, among 7 × 10⁴ events taken with BESS-TeV, and 8 × 10⁶ events taken with BESS-Polar, respectively.     

Cosmic-ray electron spectrum above 100 GeV from PPB-BETS experiment in Antarctica

Cosmic-ray electrons have been observed in the energy region from 10 GeV to 1 TeV with the PPB-BETS by a long duration balloon flight using a Polar Patrol Balloon (PPB) in Antarctica. The observation was carried out for 13 days at an average altitude of 35 km in January 2004. The PPB-BETS detector is an imaging calorimeter composed of scintillating-fiber belts and plastic scintillators inserted between lead plates. In the study of cosmic-ray electrons, there have been some suggestions that high-energy electrons above 100 GeV are a powerful probe to identify nearby cosmic-ray sources and search for particle dark matter. In this paper, we present the energy spectrum of cosmic-ray electrons in the energy range from 100 GeV to 1 TeV at the top of atmosphere, and compare our spectrum with the results from other experiments.     

Resolving electrons from protons in ATIC

The Advanced Thin Ionization Calorimeter (ATIC) experiment is designed for high energy cosmic ray ion detection. The possibility to identify high energy primary cosmic ray electrons in the presence of the ‘background’ of cosmic ray protons has been studied by simulating nuclear-electromagnetic cascade showers using the FLUKA Monte Carlo simulation code. The ATIC design, consisting of a graphite target and an energy detection device, a totally active calorimeter built up of 2.5 cm × 2.5 cm × 25.0 cm BGO scintillator bars, gives sufficient information to distinguish electrons from protons. While identifying about 80% of electrons as such, only about 2 in 10,000 protons (@ 150 GeV) will mimic electrons. In September of 1999 ATIC was exposed to high-energy electron and proton beams at the CERN H2 beam line, and this data confirmed the electron detection capabilities of ATIC. From 2000-12-28 to 2001-01-13 ATIC was flown as a long duration balloon test flight from McMurdo, Antarctica, recording over 360 h of data and allowing electron separation to be confirmed in the flight data. In addition, ATIC electron detection capabilities can be checked by atmospheric gamma-ray observations.     

Development overview of the revised NASA Ultra Long Duration Balloon

The desire for longer duration stratospheric flights at constant float altitudes for heavy payloads has been the focus of the development of the National Aeronautics and Space Administration’s (NASA) Ultra Long Duration Balloon (ULDB) effort. Recent efforts have focused on ground testing and analysis to understand the previously observed issue of balloon deployment. A revised approach to the pumpkin balloon design has been tested through ground testing of model balloons and through two test flights. The design approach does not require foreshortening, and will significantly reduce the balloon handling during manufacture reducing the chances of inducing damage to the envelope. Successful ground testing of model balloons lead to the fabrication and test flight of a ∼176,000 m³ (∼6.2 MCF – Million Cubic Foot) balloon. Pre-flight analytical predictions predicted that the proposed flight balloon design to be stable and should fully deploy. This paper provides an overview of this first test flight of the revised Ultra Long Duration Balloon design which was a short domestic test flight from Ft. Sumner, NM, USA. This balloon fully deployed, but developed a leak under pressurization. After an extensive investigation to the cause of the leak, a second test flight balloon was fabricated. This ∼176,000 m³ (∼6.2 MCF) balloon was flown from Kiruna, Sweden in June of 2006. Flight results for both test flights, including flight performance are presented.     

Dynamics of the dayside Aurora Australis

Current dayside optical studies of Aurora Australis from the Amundsen-Scott Research Station at the South Pole (74 degrees magnetic latitude) show some striking differences from optical results reported from Svalbard. A 6-channel meridian scanning photometer operating during the past three austral winters shows, in particular, the 630 nm emission is much lower, on average, than the Arctic dayside aurora and very weak on some days. The 558 nm intensity is higher relative to 630 nm suggesting the incoming electrons have a higher average energy. There are notable differences in auroral forms, giving further evidence of asymmetries in the two dayside ovals.     

Temperature variability in the tropical mesosphere during the northern hemisphere winter

Temperature observations at 20–90 km height and 5°N–15°N during the period of December 1992–March 1993 from the WINDII and MLS experiments on the UARS satellite are analysed together with MF radar winds and UKMO assimilated fields of temperature and zonal and meridional winds. The correlation between the different datasets at the tropics and zonal mean wind data at mid latitudes is examined for period February–March 1993, when series of stratospheric warming events were observed at middle and high latitudes. Wavelet analysis is applied to investigate coupling between stationary and travelling planetary waves in the stratosphere and the upper mesosphere. Planetary waves m = 1 with periods of 4–7 days, 8–12 days and 13–18 days are found to dominate the period. Westward 7- and 16–18 day waves at the tropics appear enhanced by stationary planetary waves during sudden stratospheric warming events.     

Rigidity spectrum of the 27-day variation of the galactic cosmic ray intensity in different epochs of solar activity

We study the temporal evolution of the power rigidity spectrum of the first (27 days) and the second (14 days) harmonics of the 27-day variation of the galactic cosmic ray intensity measured by neutron monitors in the period of 1965–2002. The rigidity spectrum of these variations can be approximated by a power law. We show the rigidity spectra of the first and the second harmonics of the 27-day variation of the galactic cosmic ray intensity have similar time profiles. These spectra are hard (γ ≈ 0.5 ± 0.1) and soft (γ ≈ 1.1 ± 0.2) during solar maximum and minimum activity, respectively. We ascribe this to the alternation of the sizes of the modulation regions responsible for the 27-day variation of the galactic cosmic ray intensity in different epochs of solar activity. Especially, the average radial sizes of the modulation regions of the 27-day variation and the heliolatitudinal extension of the heliolongitudinal asymmetry are smaller during solar minimum than during solar maximum. We show also, that the temporal changes of the power rigidity spectra of the first and the second harmonics of the 27-day variation of the galactic cosmic ray intensity are in a negative correlation with the changes of the rigidity spectrum of the corresponding 11-year variation.     

On the association of quiet-time Pi2 pulsations with IMF variations

The association of quiet-time Pi2 pulsations with the variations of the interplanetary magnetic field (IMF) has been examined by using three reported events, occurring during extremely quiet intervals, of which the first was on 10 March 1997, the second 27 December 1997, and the third 11 May 1999. For the first event, the onset time of ground Pi2s maps to the IMF structure bearing a variation cycle of north-to-south and north again as seen by Wind in the upstream region and Geotail in the magnetosheath. Likewise, the second and the third events have respectively, four and three recurrent turnings propagating to the Earth sensed by multiple satellites. The comparison of geomagnetic perturbations, auroral brightenings, and energetic particle data in the magnetotail with the IMF observations shows successive substorm-like activations accompanied by ground Pi2 onsets. For a clear variation cycle, the first Pi2 burst appears 36 ± 8 min after southward turning of the IMF and the second one follows14 ± 4 min after a northward turning. Moreover, ground Pi2 onsets recur under low IMF clock angle conditions. These observational results can be interpreted with the prevailing models of externally triggered substorm. But the solar wind coupling to the magnetosphere under quiet conditions proceeds in a less efficient way than under substorm time conditions. Consequently, we suggest that recurrent quiet-time Pi2s can be associated with IMF variations and their cause can be the same as those for substorm times.     

Enhancing the ATIC charge resolution

The Advanced Thin Ionization Calorimeter (ATIC) experiment is designed to investigate the charge composition and energy spectra of primary cosmic rays over the energy range from about 10¹¹ to 10¹⁴ eV during Long Duration Balloon (LDB) flights from McMurdo, Antarctica. Currently, analysis from the ATIC-1 test flight and ATIC-2 science flight is underway and preparation for a second science flight is in progress. Charge identification of the incident cosmic ray is accomplished, primarily, by a pixilated Silicon Matrix detector located at the very top of the instrument. While it has been shown that the Silicon Matrix detector provides good charge identification even in the presence of electromagnetic shower backscatter from the calorimeter, the detector only measures the charge once. In this paper, we examine use of the top scintillator hodoscope detector to provide a second measure of the cosmic ray charge and, thus, improve the ATIC charge identification.     

Oblique-incidence ionospheric soundings over Central Europe and their application for testing now casting and long term prediction models

After a first oblique-incidence ionospheric sounding campaign over Central Europe performed during the period 2003–2004 over the radio links between Inskip (UK, 53.5°N, 2.5°W) and Rome (Italy, 41.8°N, 12.5°E) and between Inskip and Chania (Crete, 35.7°N, 24.0°E), new and more extensive analysis of systematic MUF measurements from January 2005 to December 2006 have been performed. MUF measurements collected during moderately disturbed days (17 ? Ap ? 32), disturbed days (32 < Ap ? 50) and very disturbed days (Ap > 50), have been used to test the long term prediction models (ASAPS, ICEPAC and SIRM&LKW), and the now casting models (SIRMUP&LKW and ISWIRM&LKW). The performances of the different prediction methods in terms of r.m.s are shown for selected range of geomagnetic activity and for each season.     

Small satellite survey mission to the second Earth moon

This paper presents an innovative space mission devoted to the survey of the small Earth companion asteroid by means of nano platforms. Also known as the second Earth moon, Cruithne, is the target identified for the mission. Both the trajectory to reach the target and a preliminary spacecraft budget are here detailed. The idea is to exploit high efficient ion thrusters to reduce the propellant mass fraction in such a high total impulse mission (of the order of 1e6 Ns). This approach allows for a 100 kg class spacecraft with a very small Earth escape energy (5 km²/s²) to reach the destination in about 320 days. The 31% propellant mass fraction allows for a payload mass fraction of the order of 8% and this is sufficient to embark on such a small spacecraft a couple of nano-satellites deployed once at the target to carry out a complete survey of the asteroid. Two 2U Cubesats are here considered as representative payload, but also other scientific payloads or different platforms might be considered according with the specific mission needs. The small spacecraft used to transfer these to the target guarantees the manoeuvre capabilities during the interplanetary journey, the protection against radiations along the path and the telecommunication relay functions for the data transmission with Earth stations. The approach outlined in the paper offers reliable solutions to the main issues associated with a deep space nano-satellite mission thus allowing the exploitation of distant targets by means of these tiny spacecraft. The study presents an innovative general strategy for the NEO observation and Cruithne is chosen as test bench. This target, however, mainly for its relevant inclination, requires a relatively large propellant mass fraction that can be reduced if low inclination asteroids are of interest. This might increase the payload mass fraction (e.g. additional Cubesats and/or additional scientific payloads on the main bus) for the same 100 kg class mission.