高温合金复杂薄壁零件多道次充液拉深技术

充液拉深(HDD)技术是薄壁零件成形的一种有效方法.针对难成形,复杂薄壁结构的某型发动机高温合金板材零件,通过分析锥面自由悬空区的起皱失稳现象,设计了多道次充液拉深结合刚模成形的技术方案,并建立了有限元分析模型.基于有限元模拟和工艺验证试验,研究了预成形高度和终成形液室压力等关键工艺参数对零件最终成形质量的影响,探讨了...     

一种快速有效的薄壁件加工表面误差预测算法

 在切削力作用下，刀具/工件的变形是影响薄壁弱刚度件加工精度与质量的关键因素，快速有效地进行表面误差的预测是实现工艺参数优化及在线刀具路径补偿的前提。针对立铣加工过程，提出了一种考虑刀具/工件变形位置的快速柔性迭代算法，基于此建立了薄壁件加工变形预测的有限元计算模型，并通过等效集中力作用位置的确定、模型分割及最小化网格重划方法进一步提高了模型的计算速度。通过刀具/工件的瞬时接触区域的限定算法、实际切深的修正算法、材料去除效应的模拟等关键技术更提高了模型的计算精度。以典型航空铝合金材料为对象，合理安排试验，并通过数值计算结果和试验数据的对比，表明该方法计算精度高，计算速度较文献方法提高了近2倍。     

Plastic wrinkling model and characteristics of shear enforced Ti-alloy thin-walled tubes under combination die constraints and differential temperature fields

Plastic wrinkling predictions and shear enforced wrinkling characteristics of Ti-alloy thin-walled tubes under combination die constraints have become key problems urgently in need of solutions in order to improve forming quality in their shear bending processes under differential temperature fields. To address this, a wrinkling wave function was developed by considering their shear bend deformation characteristics. Based on this wave function and the thin shell theory, an energy prediction model for this type of wrinkling was established. This model enables considera-tion of the effects of shear deformation zone ranges, material parameters, loading modes, and fric-tion coefficients between tube and dies on the minimum wrinkling energy. Tube wrinkling sensitive zones (WSZs) can be revealed by combining this wrinkling prediction model with a thermal-mechanical coupled finite element model for simulating these bending processes. The reliability of this wrinkling prediction model was verified, and an investigation into the tube wrinkling char-acteristics was carried out based on the experimental conditions. This found that the WSZs are located on either a single side or both sides of the maximum shear stress zone. When the friction coefficients between the tube and the various dies coincide, the WSZs are located on both sides. The larger the value of the tube inner corner radius and/or the smaller the value of the outer corner radius, the smaller the wrinkling probability. With an increase in the value of the moving die dis-placement, the wrinkling probability increases at first, and then decreases.     

进气道蒙皮拉形数值模拟的探讨

蒙皮拉形是航空航天制造领域的一种重要的加工方法，其先进程度是衡量一个国家飞机制造能力和水平的重要标志之一，因此发展蒙皮拉形技术对于我国航空制造业具有十分重要的意义。本文旨在应用有限元软件Mare／Mentat对现阶段进气道蒙皮拉形生产过程中存在的问题，采用数值模拟结合生产性试验验证的方法进行分析研究，提出解决方案，以确定该零件生产的工艺方案和工艺参数。     

飞机橡皮囊成形零件毛坯精确预示方法研究

 橡皮囊成形是飞机钣金零件成形的主要方法之一,其初始毛坯形状的预示是橡皮囊成形中的一个难点问题。针对橡皮囊成形的工艺特点,提出了一种基于一步逆成形有限元法的飞机橡皮囊成形钣金零件毛坯快速精确预示方法。首先将设计好的飞机钣金零件作为最终构形,然后采用一步逆成形有限元法进行初始毛坯的快速反向模拟,最后将通过该方法获得的毛坯外形应用到实际飞机钣金橡皮囊成形中,实验结果表明该方法可以快速精确地预示出飞机橡皮囊成形钣金零件的初始毛坯形状。     

弯管成形理论和技术研究进展与发展趋势(英文)

As one kind of key components with enormous quantities and diversities,the bent tube parts satisfy the increasing needs for lightweight and high-strength product from both materials and structure aspec...     

A novel stability prediction approach for thin-walled component milling considering material removing process

The milling stability of thin-walled components is an important issue in the aviation manufacturing industry,which greatly limits the removal rate of a workpiece.However,for a thin-walled workpiece,the dynamic characteristics vary at different positions.In addition,the removed part also has influence on determining the modal parameters of the workpiece.Thus,the milling stability is also time-variant.In this work,in order to investigate the time variation of a workpiece's dynamic characteristics,a new computational model is firstly derived by dividing the workpiece into a removed part and a remaining part with the Ritz method.Then,an updated frequency response function is obtained by Lagrange's equation and the corresponding modal parameters are extracted.Finally,multi-mode stability lobes are plotted by the different quadrature method and its accuracy is verified by experiments.The proposed method improves the computational efficiency to predict the time-varying characteristics of a thin-walled workpiece.     

Forming Characteristics of Al-alloy Large-diameter Thin-walled Tubes in NC-bending Under Axial Compressive Loads

Tube thinning control without wrinkling occurring is a key problem urgently to be solved for improving the forming qualities in numerical control (NC) bending processes of large-diameter Al-alloy thin-walled tubes (AATTs). It may be a way solving this problem to exert axial compression loads (ACL) on the tube end in the bending. Thus, this article establishes a three-dimensional (3D) elastic-plastic explicit finite element (FE) model for the bending under ACL and has its reliability verified. Through a multi-index orthogonal experiment design, a combination of process parameters, each expressed by a proper range, for this FE model is derived to overcome the compression instability on tube ends. By combining the FE model with a wrinkling energy prediction model, an in-depth study is conducted on the forming characteristics of large-diameter AATTs with small bending radii and it can be concluded that (1) The larger the tube diameters and the smaller the bending radii, the larger the induced tangent tension stress zones on tube intrados, by which the tube maximum tangent compression stress zones will be partitioned in the bending processes; thus, the smaller the ACL roles in decreasing thinning degrees and the larger the compression instability possibilities on tube ends. (2) The tube wrinkling possibilities under ACL are larger than without ACL acting in the earlier forming periods, and smaller in the later ones. (3) For the tubes with a size factor less than 80, the ACL roles in decreasing thinning degrees are stronger than in increasing wrinkling possibilities.     

Advances and challenges on springback control for creep age forming of aluminum alloy

Creep age forming (CAF) is an advanced forming technology that combines creep deformation and age hardening processes. When compared with the conventional forming technologies including roll bending and shot-peen forming, CAF has many advantages of low residual stress, excellent dimensional stability, good service performance and short production cycle. It is an optimal technique for precise manufacturing for shape and properties of large-scale complicated thin-walled components of light-weight and high strength aluminum alloys in the aviation and aerospace industries. Nevertheless, CAF has an inevitable disadvantage that a large amount of springback occurs after unloading, which brings a challenge on the accurate shape forming and property tailoring of components. Therefore, how to achieve accurate prediction and control of springback has always been a bottleneck hindering the development of CAF to more industrial applications. After the factors of affecting springback and measures of reducing springback are summarized from the internal and external aspects, constitutive models for predicting springback and springback compensation methods for CAF of aluminum alloy panel components are reviewed. Then, a review of research progresses on tool design for CAF is presented. Finally, in view of the key issue that it is difficult to predict and control the shape and properties of components during CAF, the technical challenges are discussed and future development trends of CAF are prospected.     

薄壁件周铣过程中材料去除效应的快速仿真

 针对薄壁件铣削过程加工误差预测,建立了一种快速有效的材料去除仿真模型,即利用工件的原始有限元网格模型,直接使用径向切削量的名义值进行材料去除效应模拟,将被切除网格单元的单元刚度按被切除体积与该单元初始体积的百分率等效修正。该模型既无需进行工件网格重划,又可以很好地保证仿真精度,极大地简化了处理流程,提高了计算效率。应用实例的计算结果和试验结果比较,表明了该模型的有效性和实用性。     

真空电子束钎焊温度场数值模拟

针对不锈钢毛细管板类结构件真空电子束钎焊的特点，利用ANSYS软件建立了一个三维有限元分析模型对电子束钎焊温度场进行模拟。通过将热电偶测得的工件表面温度与有限元分析结果比较，证明所建模型的合理性。利用该模型对不锈钢圆板电子束钎焊温度场进行了预测，证明通过电子束扫描加热方式可以得到钎焊所需的局部均匀温度场。     

薄壁管数控弯曲过程中失稳起皱的主要影响因素

 针对薄壁管数控弯曲精确成形过程在多因素交互作用下可能发生失稳起皱这一复杂物理问题, 基于起皱能量准则和有限元方法相结合, 提出了预测该过程起皱发生的能量( 数值) 方法, 研究了影响薄壁管数控弯曲成形过程起皱发生的主要因素及影响机制。结果表明, 弯曲半径、相对管径、芯棒伸长量和摩擦因素是影响薄壁管数控弯曲精确成形过程起皱发生的主要因素, 而材料的应力强度系数和加工速度等对起皱发生影响较小。研究结果为薄壁管数控弯曲精确成形过程参数的确定和优化创造了条件。     

复杂异形截面薄壁环形件动模液压成形研究

 液压成形技术是成形薄壁零件的一种有效的解决方法。针对具有异形截面结构的某型发动机高温合金薄壁环形件,提出了液压成形结合动模轴向加载的复合成形方法,依据塑性力学方法和增量理论对成形过程进行了应力应变特征分析,并建立了有限元模型。基于有限元模拟和工艺试验,研究了筒坯成形区高度和型腔液压加载路径等关键工艺参数对零件成形结果的影响,探讨了成形过程中壁厚过度减薄、材料堆积"折叠"、形状不对称等失效形式,提出了优化的工艺参数。结果表明,提出的工艺方法可实现复杂异形截面薄壁环形件的整体精确成形,采用优化的筒坯成形区高度和液压加载路径可获得壁厚分布均匀、成形质量较好的零件。     

带筋整体壁板预应力喷丸成形数值模拟及变形预测

带筋整体壁板特别是高筋整体壁板具有优异的结构效率、减重效益和密封效果，在航空航天等领域备受青睐。预应力喷丸成形是大中型、长寿命、高性能复杂带筋整体壁板的一种不可多得的有效成形手段。数值模拟是促进带筋整体壁板预应力喷丸成形技术研究、进步与应用的一种极具潜力的途径。针对带筋整体壁板预应力喷丸成形数值模拟，建立了基于响应面函数的多弹丸撞击有限元模型、基于应变中性层内移的反弯曲应力场法模拟模型、预应力喷丸成形RBF神经网络预测模型，实现了喷丸成形应力场法数值模拟、预应力喷丸成形较高精度数值模拟与变形预测，为带筋整体壁板预应力喷丸成形技术研究和实际应用提供了一种更为便捷、高效、经济的途径。     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

基于ANSYS的参数化薄壁件加工变形分析与计算

随着对航空产品性能要求的进一步提高,现代航空工业中广泛使用薄壁件零件.由于薄壁件零件刚度差,在加工过程中极易发生变形.建立了参数化薄壁件加工过程有限元模型,借助有限元软件ANSYS 10.0对薄壁件加工变形量进行分析计算研究.由于ANSYS本身功能有限,不能提供较为友好的图形化界面输入,所以基于C#环境完成了ANSYS...     

薄壁件周铣切削力建模与表面误差预测方法研究

薄壁件加工变形是影响加工精度与质量的关键因素,而切削力建模则是预测表面加工误差的基础。针对两种典型的切削力模型,系统地研究了薄壁件周铣加工过程中切削力变化及表面变形误差分布的有限元计算方法,提出了基于三维非规则网格的刀具/工件变形的耦合迭代格式以及恒定网格下材料去除效应的变刚度处理方法等关键技术,仿真过程充分考虑了切屑厚度变化及不同切削参数对预测结果的影响。以典型钛合金航空材料构件为例,数值计算结果与实验参考数据比较表明,两种切削力模型对同一切削过程的预测均具有很好的一致性。     

Vibration suppression of thin-walled workpiece machining considering external damping properties based on magnetorheological fluids flexible fixture

Milling of the thin-walled workpiece in the aerospace industry is a critical process due to the high flexibility of the workpiece. In this paper, a flexible fixture based on the magnetorheological(MR) fluids is designed to investigate the regenerative chatter suppression during the machining.Based on the analysis of typical structural components in the aerospace industry, a general complex thin-walled workpiece with fixture and damping constraint can be equivalent as a rectangular cantilever beam. On the basis of the equivalent models, natural frequency and mode shape function of the thin-walled workpiece is obtained according to the Euler–Bernoulli beam assumptions. Then,the displacement response function of the bending vibration of the beam is represented by the product of all the mode shape function and the generalized coordinate. Furthermore, a dynamic equation of the workpiece-fixture system considering the external damping factor is proposed using the Lagrangian method in terms of all the mode shape function and the generalized coordinate, and the response of system under the dynamic cutting force is calculated to evaluate the stability of the milling process under damping control. Finally, the feasibility and effectiveness of the proposed approach are validated by the impact hammer experiments and several machining tests.     

转动薄壁圆柱筒振动特性:有限元法与解析解的对比

采用解析法和有限元法,研究了科氏力和离心刚化效应对不同约束条件下转动薄壁圆柱筒结构振动特性的影响,并进行了对比分析.结果表明,与解析解相比,有限元法计算得到的静止状态薄壁圆柱筒结构固有频率因边界条件不同而存在不同的差异,其中两端简支边界条件下与解析解吻合较好.随转速增加,前后行波频率差值加大,曲线明显分离,而这种分离趋势随周向波数的增大而减小.由于离心刚化效应的存在,相比于只考虑科氏力的影响,转动薄壁圆柱筒的行波频率有增大的趋势,并且当转速和周向波数较大时,前后行波频率均会大于对应的静频率.      

用刚粘塑性有限元法分析叶片精锻时的金属流动和变形组织

本文依据现行生产的某航空发动机压气机二级叶片的有关数据,采用刚粘塑性有限元法对叶身截面的成形过程进行了模拟,得到了纯铅和TC4钛合金两种材料在不同工艺条件下的金属流动和应变分布的规律,讨论了摩擦条件和毛边桥尺寸对金属流动的影响比较了锻件内不同区域的应变量所对应的组织。计算网格与实验网格比较基本吻合。