Physical assessment of coastal vulnerability under enhanced land subsidence in Semarang,Indonesia, using multi-sensor satellite data

Research has been conducted in Semarang, Indonesia, to assess coastal vulnerability under enhanced land subsidence using multi-sensor satellite data, including the Advanced Land Observing Satellite (ALOS) Phased Array type L-band SAR (PALSAR), Landsat TM, IKONOS, and TOPEX/Poseidon. A coastal vulnerability index (CVI) was constructed to estimate the level of vulnerability of a coastline approximately 48.68?km in length using seven physical variables, namely, land subsidence, relative sea level change, coastal geomorphology, coastal slope, shoreline change, mean tidal range, and significant wave height. A comparison was also performed between a CVI calculated using seven parameters and a CVI using six parameters, the latter of which excludes the land subsidence parameter, to determine the effects of land subsidence during the coastal vulnerability assessment. This study showed that the accuracy of coastal vulnerability was increased 40% by adding the land subsidence factor (i.e., CVI 6 parameters?=?53%, CVI 7 parameters?=?93%). Moreover, Kappa coefficient indicated very good agreement (0.90) for CVI 7 parameters and fair agreement (0.3) for CVI 6 parameters. The results indicate that the area of very high vulnerability increased by 7% when land subsidence was added. Hence, using the CVI calculation including land subsidence parameters, the very high vulnerability area is determined to be 20% of the total coastline or 9.7?km of the total 48.7?km of coastline. This study proved that land subsidence has significant influence on coastal vulnerability in Semarang.     

Design of BDS-3 integrity monitoring and preliminary analysis of its performance

With the improvement in the service accuracy and expansion of the application scope of satellite navigation systems, users now have high demands for system integrity that are directly related to navigation safety. As a crucial index to measure the reliability of satellite navigation systems, integrity is the ability of the system to send an alarm when an abnormity occurs. The new-generation Beidou Navigation Satellite System (BDS-3) prioritized the upgrading of system integrity as an important objective in system construction. Because the system provides both basic navigation and satellite-based augmentation system (SBAS) services by the operational control system, BDS-3 adopts an integrated integrity monitoring and processing strategy that applies satellite autonomous integrity monitoring and ground-based integrity monitoring for both the basic navigation service and SBAS navigation service. BDS-3 also uses an improved and refined integrity parameter system to provide slow, fast and real-time integrity parameters for basic navigation, and provide SBAS-provided integrity information messages in accordance with Radio Technical Commission for Aeronautics (RTCA) specification and dual frequency, multi-constellation (DFMC) specification to support the SBAS signal frequency, single constellation operation and DFMC operation respectively. The performance of BDS-3 system integrity monitoring is preliminarily verified during on-orbit testing in different states, including normal operation, satellite clock failure and satellite ephemeris failure. The results show that satellite autonomous integrity monitoring, ground-based integrity monitoring and satellite-based augmentation all correctly work within the system. Satellite autonomous integrity monitoring can detect satellite clock failure but not satellite orbit failure. However, ground-based integrity monitoring can detect both. Moreover, the satellite-based augmentation integrity system monitors the differential range error after satellite ephemeris and clock error corrections based on user requirements. Compared to the near minute-level time-to-alert capability of ground-based integrity monitoring, satellite autonomous integrity monitoring reduces the system alert time to less than 4 s. With a combined satellite-ground monitoring strategy and the implementation of different monitoring technologies, the BDS-3 integrity of service has been considerably improved.     

Monitoring of rice cropping intensity in the upper Mekong Delta,Vietnam using time-series MODIS data

Information on rice growing areas is important for policymakers to devise agricultural plans. This research explores the monitoring of rice cropping intensity in the upper Mekong Delta, Vietnam (from 2001 to 2007) using time-series MODIS NDVI 250-m data. Data processing includes three steps: (1) noise is filtered from the time-series NDVI data using empirical mode decomposition (EMD); (2) endmembers are extracted from the filtered time-series data and trained in a linear mixture model (LMM) for classification of rice cropping systems; and (3) classification results are verified by comparing them with the ground-truth and statistical data. The results indicate that EMD is a good filter for noise removal from the time-series data. The classification results confirm the validity of LMM, giving an overall accuracy of 90.1% and a Kappa coefficient of 0.7. The lowest producer and user accuracies were associated with single crop rain-fed rice class due to the mixed pixel problems. A strong yearly correlation at the district level was revealed in the MODIS-derived areas (R² ? 0.9). Investigation of interannual changes in rice cropping intensity from 2001 to 2007 showed a remarkable conversion from double to triple crop irrigated rice from 2001 to 2003, especially in the Thoai Son and Phu Tan districts. A big conversion from triple crop rice back to double crop rice cultivation was also observed in Phu Tan from 2005 to 2006. These changes were verified by visual interpretation of Landsat images and examination of NDVI profiles.     

Subsidence rate monitoring of Aghajari oil field based on Differential SAR Interferometry

Land subsidence, due to natural or anthropogenic processes, causes significant costs in both economic and structural aspects. That part of subsidence observed most is the result of human activities, which relates to underground exploitation. Since the gradual surface deformation is a consequence of hydrocarbon reservoirs extraction, the process of displacement monitoring is amongst the petroleum industry priorities. Nowadays, Differential SAR Interferometry, in which satellite images are utilized for elevation change detection and analysis – in a millimetre scale, has proved to be a more real-time and cost-effective technology in contrast to the traditional surveying method. In this study, surface displacements in Aghajari oil field, i.e. one of the most industrious Iranian hydrocarbon sites, are being examined using radar observations. As in a number of interferograms, the production wells inspection reveals that surface deformation signals develop likely due to extraction in a period of several months. In other words, different subsidence or uplift rates and deformation styles occur locally depending on the geological conditions and excavation rates in place.     

TS-InSAR analysis for monitoring ground deformation in Lanzhou New District,the loess Plateau of China,from 2017 to 2019

Large-scale land creation projects involving the cutting of mountains to infill gullies for construction have been carried out in Lanzhou New District (LZND). However, there is an urgent need for comprehensive and detailed research on the spatiotemporal evolution of ground deformation in LZND. Based on Sentinel-1A SAR data, combined with the urban geological background, the ground deformation in LZND from 2017 to 2019 was analysed. Two independent, multi-temporal techniques, persistent scatterers interferometry (PS-InSAR) and the small baseline subset (SBAS-InSAR), were used to calculate the deformation time series, and the results were cross-verified. The time series-monitoring results of the SBAS and PS calculations exhibited strong consistency in LZND and verified the high reliability of the experimental results. The results showed the whole surface of the LZND from March 2017 to October 2019 maintained stability, and the deformation rate was primarily in the range of ?10 to 10 mm/year. However, ground deformation in the Xicha area was evident. The maximum annual deformation rates monitored by SBAS-InSAR and PS-InSAR were ?52.48 mm/year and ?56.35 mm/year, respectively. The most typical deformation areas include the built-up area and the land creation area. The surface subsidence area was concentrated in the filling area. The ground deformation range of LZND kept expanding and accelerating from 2017 to 2019. Land creation, urban construction, geology and precipitation were the primary factors contributing to local severe ground deformation. The results of this study provide reference for the regional urban planning in LZND.     

SBAS电文时序动态编排算法

星基增强系统（SBAS）通过GEO卫星转发SBAS电文实现对GNSS服务性能的提升,以满足民航用户不同飞行阶段的导航需求,因此,合理有效的电文内容及播发时序设计是系统实现高质量服务的重要保证。为提高电文编排的灵活性,避免固定时序填补空余电文引起的播发资源浪费,提出了一种SBAS电文时序动态编排算法,在满足国际标准要求的前提下,综合利用SBAS电文龄期和最大播发间隔实现待播发电文的自动选择。利用NTMF实测数据对当前各主要SBAS的电文进行了特性分析,对所提方法的单双频SBAS电文编排效果进行了评估。结果表明:所提算法可保证电文时序符合国际标准要求,实现了重要电文的优先播发,将空余时隙进行动态分配实现了各类型电文播发间隔的近等比例缩短。与固定时序相比,单频SBAS完好性电文播发间隔缩短约15.0%,首次定位时间缩短约8%,双频SBAS电文首次定位时间缩短约6.5%;与固定时序的BDSBAS B1C电文相比,完好性服务能力提升约14.7%,首次定位时间缩短约16.7%。所提算法有效提升了SBAS电文播发的播发效率,实现了SBAS播发资源的100%有效利用。      

WAAS卫星播发电文一致性分析

星基增强系统(SBAS)是在传统GNSS的基础上为了进一步满足民航用户对卫星导航系统越来越高的精度、完好性、连续性和可用性需求而应运而生.目前全球已建立起了多个SBAS系统,其中提供服务时间最长的是美国的WAAS系统.WAAS系统包括38个参考站、3个主控站、6个上注站和3颗GEO卫星,每个参考站配备3套独立的监测接收...     

Exploring the potential of Sentinel-3 delay Doppler altimetry for enhanced detection of coastal currents along the Northwest Atlantic shelf

In this study, we evaluate Sentinel-3A satellite synthetic aperture radar (SAR) altimeter observations along the Northwest Atlantic coast, spanning the Nova Scotian Shelf, Gulf of Maine, and Mid-Atlantic Bight. Comparisons are made of altimeter sea surface height (SSH) measurements from three different altimeter data processing approaches: fully-focused synthetic aperture radar (FFSAR), un-focused SAR (UFSAR), and conventional low-resolution mode (LRM). Results show that fully-focused SAR data always outperform LRM data and are comparable or slightly better than the nominal un-focused SAR product. SSH measurement noise in both SAR-mode datasets is significantly reduced compared to LRM. FFSAR SSH 20-Hz noise levels, derived from 80-Hz FFSAR data, are lower than 20-Hz UFSAR SSH with 25% noise reduction offshore of 5 km, and 55–70% within 5 km of the coast. The offshore noise improvement is most likely due to the higher native along-track data posting rate (80 Hz for FFSAR, and 20 Hz for UFSAR), while the large coastal improvement indicates an apparent FFSAR data processing advantage approaching the coastlines. FFSAR-derived geostrophic ocean current estimates exhibit the lowest bias and noise when compared to in situ buoy-measured currents. Assessment at short spatial scales of 5–20 km reveals that Sentinel-3A SAR data provide sharper and more realistic measurement of small-scale sea surface slopes associated with expected nearshore coastal currents and small-scale gyre features that are much less well resolved in conventional altimetric LRM data.     

基于模糊和最小二乘的SAR图像线特征提取

针对合成孔径雷达(SAR, Synthetic Aperture Radar)图像的特点,提出一种线特征提取算法.该算法首先抑制相干斑噪声,然后对SAR图像进行模糊变换和增强,再基于假设的SAR图像灰度模型,用最小二乘法设计出低通和高通滤波器,最后检测出线特征散点,并进行连接,得到SAR图像的线特征图.实验证明本算法抗噪声干扰,边缘定位精度达到1个像素.     

An improved focusing method for geosynchronous SAR

More and more attention is paid to Geosynchronous Orbit (GEO) Synthetic Aperture Radar (SAR) in recent years due to its fine temporal resolution and large coverage, so that GEO SAR will play an important role in monitoring natural disasters, but its imaging is more difficult compared to lower Earth orbit (LEO) SAR because of the increase of orbit height. This paper mainly studies the coverage property and focusing method in GEO SAR. As is known to us, the coverage of a GEO SAR satellite can reach 1/3 of the whole Earth, and the revisiting time can reduce to 2 h, which will remarkably improve the capability in ocean applications, earth dynamics and natural hazards management and so on. Compared with the imaging in LEO SAR, a problem in GEO SAR is that the linear trajectory model can bring a big error due to the long synthetic aperture time, so that the classical imaging algorithms in LEO SAR cannot be directly applied in GEO SAR. Using the Norm method and Taylor expansion method, this paper gains an accurate slant range model, which can resolve the big error of the linear trajectory at perigee and collapse of the linear trajectory at apogee. Furthermore, this paper deduces a novel imaging algorithm for GEO SAR by means of series reversion, which realizes the focusing on large scene under the synthetic aperture time of 100 s. Finally, the simulation results at apogee and perigee prove the correction of the slant range model and imaging algorithm.     

基于卫星监视几何精度因子的UDRE值估计方法

星基增强导航系统(SBAS,Satellite Based Augmentation System)通过向用户提供用户差分距离误差(UDRE,User Differential Range Error),来保证广播星历和星钟改正数的精度并增强用户的完好性性能.给出了一种用于主控站的UDRE计算方法,提出了卫星监视几何精度因子(SSDOP,Satellite Surveillance Dilution of Precision)的概念.基于UDRE和SS-DOP的表达式,通过数学推导发现UDRE受到SSDOP和限制因子的影响,而限制因子可以用其统计平均值0.7438来替代,建立了由SSDOP估计UDRE的表达式.仿真结果表明:利用SS-DOP估计出的UDRE值,其误差不超过0.8 m,能够反映出当前卫星UDRE的特性,可以作为用户在无法接收完好性信息时快速推算UDRE的一种可行手段.     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

ASAR imaging for coastal upwelling in the Baltic Sea

Analysis of Envisat Advanced Synthetic Aperture Radar (ASAR) and Aqua/Terra Moderate Imaging Spectrometer (MODIS) infrared (IR) imagery of coastal upwelling in the southeastern Baltic Sea is presented. It is found that upwelling features are well distinct in the SAR images, and the leading imaging mechanism appears to be the change of the marine atmospheric boundary layer (MABL) stratification over the sea surface temperature (SST) front. This finding is supported by model calculations of the MABL transformation supplemented with the SAR backscatter calculations based on the CMOD4 model. In addition an empirical dependence of the SAR contrasts over the upwelling region on the wind speed and the SST drop is suggested. Finally, surface slicks accumulated in the sea surface current convergence zones generate additional distinct features in SAR imagery. This effect is interpreted within the framework of the coastal current circulation model based on analysis of the SST snapshot.     

基于空间统计方法的电离层折射修正技术

针对中国上空电离层所具有的特殊性和GPS观测站在中国西部分布相对稀疏的特点, 尝试探索中国卫星增强系统电离层时延信息修正技术, 为卫星导航定位以及遥感、遥测等空间应用工程的电波修正提供数据. 利用中国地壳形变监测网提供的双频GPS数据, 以空间统计方法为主要工具, 给出了普通Kriging电离层估计算法, 构建了平静期和磁暴期电离层理论变异模型, 详细分析了电离层折射修正的精度. 结果表明, 将空间统计方法应用于卫星增强系统中的电离层时延改正问题, 有利于提高增强系统的电离层折射修正精度, 特别是在观测样点相对较少的情况下, 有利于系统完整性的实现.      

NeQuick G model based scale factor determination for using SBAS ionosphere corrections at low earth orbit

A space-based augmentation system (SBAS) provides real-time correction data for global navigation satellite system (GNSS) users near ground. In order to use the SBAS ionosphere correction for low Earth orbit (LEO) satellites, the correction should be scaled down for the LEO altitude. This scale factor varies with ionosphere distribution and it is hard to determine the value at LEO in real time. We propose a real-time scale factor determination method by using Galileo GNSS’s NeQuick G model. A LEO satellite GPS data and SBAS data received on ground were used to evaluate the performance of the NeQuick G derived variable scale factor. The NeQuick G derived scale factor shows a significant accuracy improvement over NeQuick G model or pre-determined constant scale factor. It improves a vertical positioning accuracy of the LEO satellite. The error mean reductions of the vertical positioning over NeQuick G and the constant scale factor are 31.5% and 11.7%, respectively.     

Validity assessment of SAMOSA retracking for fully-focused SAR altimeter waveforms

We demonstrate in this work how we can take advantage of known unfocused SAR (UF-SAR) retracking methods (e.g. the physical SAMOSA model) for retracking of fully-focused SAR (FF-SAR) waveforms. Our insights are an important step towards consistent observations of sea surface height, significant wave height and backscatter coefficient (wind speed) with both UF-SAR and FF-SAR. This is of particular interest for SAR altimetry in the coastal zone, since coastal clutter may be filtered out more efficiently in the high-resolution FF-SAR waveform data, which has the potential to improve data quality. We implemented a multi-mission FF-SAR altimetry processor for Sentinel-3 (S3) and Sentinel-6 Michael Freilich (S6), using a back-projection algorithm, and analysed ocean waveform statistics compared to multilooked UF-SAR. We find for Sentinel-3 that the averaged power waveforms of UF-SAR and FF-SAR over ocean are virtually identical, while for Sentinel-6 the FF-SAR power waveforms better resemble the UF-SAR zero-Doppler beam. We can explain and model the similarities and differences in the data via theoretical considerations of the waveform integrals. These findings suggest to use the existing UF-SAR SAMOSA model for retracking S3 FF-SAR waveforms but the SAMOSA zero-Doppler beam model for S6 FF-SAR waveforms, instead. Testing the outlined approach over short track segments, we obtain range biases between UF-SAR and FF-SAR lower than 2 mm and significant wave height biases lower than 5 cm.     

面向综合环境监测的星载SAR技术发展

针对中国微波遥感对地观测在信息维度、反演精度、观测效率和体系架构等方面存在的问题,基于国家重点研发计划“星载新体制SAR综合环境监测技术”的研究内容与成果,探讨了面向综合环境监测的若干未来星载SAR技术发展。在超大幅宽成像方面,提出分段渐变重频时序设计方案和基于最优线性无偏估计的低过采样变重频数据处理算法,实现了跨盲区大幅宽星载SAR成像;在宽幅星载SAR高灵敏度成像方面,提出中频数字波束合成高效星上实时处理架构和加权因子快速生成算法,采用16通道机载飞行试验数据验证,图像信噪比提升约112dB;在多极化星载SAR成像方面,分别提出一种简缩极化分解算法及混合全极化方位模糊抑制方法,在P/L波段机载飞行试验中得到验证;在高精度干涉SAR技术方面,提出基于改进相位补偿方案的层析SAR处理方法,利用P波段全极化层析SAR数据验证,获得优于0.9m的森林高度反演精度;在综合环境监测星座架构设计方面,针对广域地表高程、地表形变、海浪谱能量、洋流速度和生物量应用,完成品质因数达100的高分宽幅SAR卫星方案,其观测效能和观测维度较目前在轨SAR卫星有大幅提升。     

一种星载SAR模糊区回波信号仿真方法

模糊度是星载合成孔径雷达(SAR,Synthetic Aperture Radar)星地一体化系统方案设计中的重要技术指标.为了定量化研究模糊度对图像质量的影响,提出了一种星载SAR模糊区回波信号的仿真方法.该方法采用星载SAR模糊区回波信号模型.利用该方法生成包含观测区场景和模糊区场景的星载SAR回波信号,经成像处理后可以获得具有模糊特性的SAR图像.该仿真方法为定量化研究模糊度与图像质量之间的关系提供仿真工具,它能够反映模糊区目标的图形特征,为SAR图像的解译判读提供参考依据.计算机仿真结果验证了该方法的有效性.      

A point-wise least squares spectral analysis (LSSA) of the Caspian Sea level fluctuations,using TOPEX/Poseidon and Jason-1 observations

The Caspian Sea has displayed considerable fluctuations in its water level during the past century. Knowledge of such fluctuation is vital for understanding the local hydrological cycles, climate of the region, and construction activities within the sea and along its shorelines. This study established a point-wise satellite altimetry approach to monitor the fluctuations of the Caspian Sea using a complete dataset of TOPEX/Poseidon for the period 1993 to the middle of 2002, and its follow-on Jason-1 for the period 2002 to August 2009. Therefore, 280 virtual time-series were constructed to monitor the fluctuations. The least squares spectral analysis (LSSA) method is, then employed to find the most significant frequencies of the time-series, while the statistical method of principle component analysis (PCA) is applied to extract the dominant variability of level variations. The study also used the observations of TOPEX/Poseidon and Jason-1 over the Volga River along with 5 years of Volga’s water discharge to study its influence on the Caspian Sea level changes. The LSSA results indicate that the lunar semidiurnal (M2) and the Sun semidiurnal (S2) frequencies are the main tidal frequencies of the Caspian Sea with the mean amplitude of 4.2 and 2.8 cm, respectively. A statistically significant long-term frequency (12.5-years period) is also found from altimetry and tide gauge observations. A phase lag, related to the inter-annual frequencies of the Volga River was detected from the point-wise time-series showing level propagation from the northwest to the southeast of the sea. The cross-correlation between the power spectrum of Volga and that of the northern-most, middle, and southern-most points within the Caspian Sea were respectively 0.63, 0.51 and 0.4 of zero-lag correlation, corroborating the influence of the Volga River. The result of PCA also shows that different parts of the Caspian Sea exhibit different amplitudes of level variations, indicating that the point-wise approach, when employing all available satellite measurements could be a suitable method for a preliminary monitoring of this inland water resource as it gives accurate local fluctuations.     

中国区域电离层异常数据野值检测

针对中国区域连续运行参考站接收机野值会干扰星基增强系统（SBAS）电离层异常事件提取的问题，提出了一种基于电离层垂直延迟时间梯度的野值检测方法。首先，介绍了电离层延迟数据的提取方法；然后，论述了依据野值和电离层异常的不同时空相关特性进行野值检测的方法，并用单双频定位误差结果验证了野值检测的正确性；最后，对检测结果进行了分析。结果表明:该方法可有效区分野值和电离层异常；在中国大陆构造环境监测网络200多个参考站中，野值检测所剔除的参考站数目在3~10个，对电离层穿透点空间分布的影响在可接受范围内。