共查询到18条相似文献,搜索用时 156 毫秒
1.
智能结构中致动器数目与位置的优化 总被引:3,自引:1,他引:2
采用最优控制理论研究智能结构振动控制机电一体化的建模过程;通过定义输入能量相关矩阵优化了致动器的数目;基于致动器的控制效能,给出了一种简单实用的致动器位置配置方法;最后针对智能悬臂粱和大型空间智能桁架结构的振动控制仿真,表明数目与位置的优化方法是行之有效的。 相似文献
2.
研究了模糊控制应用于多输入、多输出的空间智能桁架系统的振动控制.首先建立空间智能桁架的有限元方程,在此基础上,设计了一个标准的模糊控制器,并通过选择合适的量化因子将该标准模糊控制器应用于每一对同位布置的作动器/传感器,各个控制器之间独立工作.这样就避免了设计MIMO模糊控制器带来的复杂问题.最后针对空间智能桁架进行仿真,结果表明,设计的模糊控制器可以有效抑制桁架的振动,并且具有结构简单、鲁棒性强、抑制控制溢出的优点. 相似文献
3.
针对航天器上太阳帆板这种悬臂外伸薄板结构的挠性附件 ,存在环境扰动下所引起的振动 ,本文采用压电智能结构作为执行器对悬臂板进行主动振动控制。基于板系统的特征建模 ,并结合自适应控制对挠性板的主动控制进行了研究。通过仿真研究结果与应变律反馈控制比较 ,表明该方法的有效性 相似文献
4.
基于Hamilton变分原理,采用Mindlin厚板理论,研究了旋转状态中心刚体—悬臂厚板振动及其变结构控制问题。采用Hamilton状态空间法,应用弹性波与振动模态理论,确定了Mindlin厚板中的振动模态。针对该模型系统设计了控制器,采用滑模变结构控制理论,实现了对系统实施渐近稳定控制的设计。采用的变结构控制能使系统达到所期望的振动状态,有效地抑制了平板振动。最后,给出了数值模拟结果,讨论了中心刚体—悬臂厚板位移的动力学控制规律。该方法和计算结果可望能在带有柔性附件航天器的动力学控制中得到应用。 相似文献
5.
6.
空间智能桁架作动器/传感器位置优化中的遗传算法应用 总被引:1,自引:0,他引:1
研究了空间智能桁架振动控制中的作动器/传感器位置优化问题。在对作动器/传感器进行动力学建模的基础上,推导出整个空间桁架机电耦合作动方程和传感方程。基于作动效率和观测效率,提出了不依赖于控制方法的位置优化准则,采用遗传算法对作动器/传感器位置进行了优化。最后针对空间智能桁架进行了位置优化仿真和模糊振动控制仿真,仿真结果验证了遗传算法优化此类问题的优越性、可信性。 相似文献
7.
8.
研究了有压电智能结构的柔性太阳能帆板振动的模糊控制。建立了帆板的动力学方程,针对振动问题的特殊性,采用周期变论域设计了变论域自适应模糊控制器,提高了模糊控制的精度和自适应性能。仿真结果表明:变论域自适应模糊控制能有效抑制柔性太阳能帆板的振动,并明显优于简单模糊控制。 相似文献
9.
10.
控制输入饱和的挠性航天器姿态机动智能鲁棒控制 总被引:2,自引:0,他引:2
针对挠性航天器带有执行机构饱和的姿态控制问题,提出了一种将自适应变结构和智能控制相结合的智能鲁棒控制方法。首先,在基于非线性和低阶模态的动力学模型基础上,针对挠性模态不可测的特点,给出了仅利用输出信息的智能自适应变结构输出反馈控制器的设计方法,其中利用神经网络控制来补偿执行机构饱和非线性和采用自适应控制技术克服确定不确定性的界的困难,并基于Lyapunov方法分析了滑动模态的存在性及系统的稳定性。最后,将该方法应用于挠性航天器的姿态机动控制,在反作用飞轮存在饱和特性约束的情况下,完成姿态机动的同时,可有效地抑制挠性附件的振动。
相似文献
相似文献
11.
12.
《中国航天(英文版)》2021,(1)
As one of the newly developing intelligent/smart materials, shape memory alloys(SMAs) have become an important material and have broad application prospects. With smart structures, the integration of SMAs as actuators and sensors in structural components, has drawn significant attention and interest in the aerospace field. In this paper, the research status of SMAs at home and abroad in recent years was reviewed, including the characteristics, classification, investigation progress and applications in the aerospace field. Finally, the development trend prospects for SMAs was also presented. 相似文献
13.
大载荷主动隔振平台技术综述及其 总被引:2,自引:0,他引:2
文章从智能材料的特性、作动器的设计及配置方案,控制建模、控制算法、控制器设计等控制技术,隔振方法、承力方案、连接结构等结构设计技术等几方面对大载荷主动隔振平台技术进行了综述,对国内外近几年在大载荷隔振平台研究开发中智能材料的应用、控制技术及结构设计等方面的研究进展做了较全面的总结与阐述,并在此基础上提出了隔振致稳控制平台承载能力、隔振致稳控制平台精度的评定方法。 相似文献
14.
15.
This paper presents a dual-stage control system design method for the three-axis-rotational maneuver and vibration stabilization of a spacecraft with flexible appendages embedded with piezoceramics as sensors/actuators. In this design approach, attitude control system and vibration suppression were designed separately using lower order model. The design of attitude controller was based on variable-structure control (VSC) theory leading to a discontinuous control law. To accomplish asymptotic attitude maneuvering in the closed-loop system and be insensitive to the interaction of elastic modes in the presence of unknown disturbances/uncertainty and input saturation as well, a switching mechanism is employed to design the attitude controller such that outside the sliding region VSC law with a time-varying sliding surface is implemented and inside the region the VSC law with a linear sliding surface is activated. Furthermore, a hyperbolic tangent function in conjunction with a sharpness function permitted to vary with time according to a set of user-defined parameters is implemented to offset the disadvantages of existing saturation-respecting controller and chattering. In addition, for actively damping the excited elastic vibrations during attitude maneuvering, modal velocity feedback and strain rate feedback control design methods are presented and compared by using piezoelectric materials as additional sensors and actuators bonded on the surface of the flexible appendages. Numerical simulations are performed to show that rotational maneuver and vibration suppression are accomplished in spite of the presence of disturbance torque, parameter uncertainty and control saturation nonlinearity. 相似文献
16.
17.
智能结构有限元模型的建立及静态形状控制 总被引:9,自引:1,他引:9
本文建立了含有分布压电传感元件和执行元件的板结构的有限元模型,提出了一种新的具有电自由度板弯曲单元,用于分析含有分布传感元件和执行元件的板结构。以此为基础,提出了智能结构静态形状控制的一般方法,即被动控制方法和主动控制方法。最后,提供了两个数值示例,说明本文提出的方法的应用。 相似文献
18.
Decentralized vibration control of a multi-link flexible robotic manipulator using smart piezoelectric transducers 总被引:1,自引:0,他引:1
The work in this paper is aimed to investigate the use of a decentralized control system for suppressing vibration of a multi-link flexible robotic manipulator using embedded smart piezoelectric transducers. To achieve this, a non-linear dynamic model of a flexible robotic manipulator with smart piezoelectric actuators/sensors, is developed based on the co-rotational finite element method. The method incorporates multiple co-ordinate (co-rotational) systems which rotate and translate with each element, so that the geometric non-linearity present in rotating manipulator system can be dealt with efficiently. The placement of piezoelectric actuators and sensors over the flexible links are considered for the application of decentralized control system. A numerical study shows that the developed co-rotational finite element method can be utilized to investigate the piezoelectric actuator/sensor placement and vibration control performances for a multi-link flexible manipulator undertaking complicated motion. 相似文献