Dust modelling of fast-flyby missions: Implications of in situ measurements

Using the Divine approach to modelling of cometary dust distributions within the dust envelope, together with the Reference Model parameters established by the Comet Halley Environment Working Group, predicted flux and fluence values are presented for each of the Giotto Dust Impact Detection System (DIDSY) subsystems. Implications for returned DIDSY data is discussed with particular reference to mass-size distribution and particle fluence as a fuction of time. It is also shown that the first particle impact event recorded by any of the DIDSY subsystems is likely to be of sufficient mass to penetrate the front shield of the Giotto spacecraft.     

Modelling the neutral gas environment of comets with special application to P/Halley

A technique has been developed which allows relatively accurate modelling of cometary gas production from nothing more than a visible light curve. Application to P/Halley suggests the production rate of parent molecules will be about 2.6 × 10²⁹ per second on March 10, 1986, for example. The uncertainties and intrinsic limitations in this approach are outlined. The theory is then extended to predictions of abundance of other gaseous species, and a photometric model of these gases provided. Combined with the dust model of N. Divine, preliminary predictions of the luminance of P/Halley as seen in any direction from inside the coma or outside can be provided for λλ3000–7000.     

Coma morphology and dust emission pattern of comet Halley

This contribution starts with a short overview on cometary dust modelling and then focuses on the application of coma modelling with respect to in-situ measurements of cometary dust and ground based observations. The fountain model, valid for the dynamics of small cometary dust particles, is discussed. Models using Keplarian theory for the motion of the dust particles are outlined and the ESOC coma model is presented. Some direct applications of this model to analyse the results of the recent spacecraft flybys of comet Halley, as dust flux profiles, particle ground tracks and envelope positions, are shown. To compare the model with ground-based astronomical observations, the utilization of the ESOC coma model for the generation of synthetic images is demonstrated and some future prospects of this technique are outlined.     

Earth encounter velocities for interplanetary meteoroids

The speed distribution of meteoroids encountering the Earth is shown to be similar for all meteoroid masses in the range 1 g to 10⁻¹² g. The speed distribution of interplanetary meteoroids encountering the Earth has usually been inferred from meteor observations. This paper reviews commonly quoted distributions and introduces more recent estimates. The influence quoted measurement uncertainties have on the distribution of Earth encounter velocities presented by Sekanina and Southworth (1975) and Erickson (1968) is presented. The Divine (1993) model of interplanetary meteoroids fits a set of orbital distributions to a wide range of spacecraft and ground based dust detector observations. By ‘flying’ the Earth through this model the distribution of geocentric encounter velocities has been obtained for typical particle masses, 10⁻⁹ and 10⁻¹² g while those at 10⁻⁴ and 10⁻⁵ g are shown to be in error.     

In-situ photopolarimetric measurements of dust and gas in the coma of Halley''s comet

The Halley Optical Probe Experiment (HOPE) on board the Giotto spacecraft has provided the first in-situ measurements, both of the dust and of some gaseous species, from inside the coma of the comet. The instrument has already been described /1/, together with first results /2/. The purpose of this note is to show how optical measurements can lead to in-situ information, how those were obtained during the 13–14 march 1986 Halley fly-by, and what is the status of the data analysis.     

The interplanetary dust environment beyond 1 AU and in the vicinity of the ringed planets (tutorial talk)

The dust population at 1 AU is known for all sizes between μm and cm to an accuracy better than one order of magnitude. It was observed by Helios that the fine grained dust (μm to 100 μm) decreases with increasing sun distance ∞ r^?1.3, at least between 0.3 and 1 AU /1/.Two Pioneer $\text{10}\text{11}$ dust experiments observed the dust distribution beyond 1 AU in the 10 to 100 μm diameter size range for the first time directly with contradicting results. The penetration experiment saw a constant flux out to 20 AU while the optical experiment observed a decrease of the dust number densities until 3.3 AU, but no scattered light was recorded further out. An attempt is made to explain these observations on the basis of the socalled ‘Greenberg’-particles: cometary core/mantle grains with organic mantle material. The observed enhancement of the dust flux by 1 or 2 orders of magnitudes near Jupiter and Saturn are interpreted as being caused by gravitational focussing, ejecta from jovian/saturnian satellites and electrostatic fragmentation products.     

Ablation and chemistry of meteoric materials in the atmosphere of Titan

We compute the input of meteoric materials expected on Titan, and integrate this dust model with an ablation model and a comprehensive chemical model, investigating the effects on the atmosphere and surface. We find that a water deposition of 10-100 times the expected interplanetary dust flux /7/, or a recent large impact, is required to produce the observed CO₂ abundance /2/. Ionisation due to meteoric activity is not likely to be higher than that due to other sources.     

Charges on dust particles

We discuss the potential (charge) on dust particles in various environments. We first consider the classical case of a single isolated dust particle. In conditions which apply to planetary dust rings, the exact value of the dust potential depends critically on several effects (e.g. secondary electron emission, photoelectric efficiency) which are not well known for small dust particles of relevant material and surface conditions. In dust clouds of high dust densities the classical approach fails to give the correct value of the dust potential due to the neglect of collective effects. In terms of an ordering parameter P = a_μN_d0/n₀ (dust radius in microns × cloud dust density/exterior plasma density) the collective effects on the dust potential become apparent at P ～ 10^?6. For increasing values of P the collective effects increase, whence the dust potentials decrease and eventually approach zero.     

Detection of meteors and sub-relativistic dust grains by the fluorescence detectors of ultra high energy cosmic rays

Fluorescence detectors of ultra high energy cosmic rays (UHECR) allow to record not only the extensive air showers, initiated by the UHECR particles, but also to detect light, produced by meteors and by the fast dust grains. It is shown that the fluorescence detector operated at the mountain site can register signals from meteors with kinetic energy threshold of about 25 J (meteor mass ∼ 5 × 10⁻⁶ g, velocity ∼ 3 × 10⁶ cm/s). The same detector might be used for recording of the dust grains of smaller mass (of about 10⁻¹⁰ g) but with velocity 10⁹ cm/s, close to the light velocity (sub-relativistic dust grains). The light signal from a sub-relativistic dust grain is expected in much shorter time scale (∼0.001 s), in comparison with the meteor signal (∼0.1–1 s), and much longer than duration of the UHECR signals (tens of μs). The fluorescence detector capable to register various phenomena: from meteors to UHECR – should have a variable pixel and selecting system integration time. A study of the new phenomenon of sub-relativistic grains will help to understand the mechanism of particle and dust grain acceleration in astrophysical objects (in SN explosions, for example).     

Ion formation by high- and medium-velocities dust impacts from laboratory measurements and Halley results

The ion formation processes by dust impacts have been studied qualitatively as well as quantitatively by dust accelerator laboratory measurements. Iron, carbon and metallized glass particles in the femto- to nano-gram mass range had been impacted on various metal targets in a velocity regime of v = 2 - 64 km/s. In the high velocity regime as relevant for the (retrograde) Halley encounter more than 99% of the ions produced are singly charged atomic, the rest molecular ones. The ion/atom ratios are apparently modified SIMS yields, the modification parameter being impact velocity dependent. A semiempirical formula was deduced for the determination of mass and density of the impacting particle from target and projectile ion yields. When evaluating the Halley encounter results, the elemental distribution of p/Halley dust appeared nearly to be solar; the organic fraction (CHON) could be characterized in a rough manner as fairly unsaturated. Oligomers of the monomers C₂H₂ (65%), CH₂O (25%), and HCN (10%) are probable.

With medium velocities (for prograde comet encounter), i.e. v = 15-30 km/s molecular ion types govern the mass spectra. Consequently, more chemical information of the projectile can be expected in this case, additional to the elemental distribution. Mass and density of the impinging dust particles can be determined as well.     

A synchrotron-based facility for the in-situ location,chemical and mineralogical characterization of ∼10 μm particles captured in aerogel

NASA’s Stardust mission collected dust from the coma of Comet Wild-2 on January 2nd, 2004, by direct capture into aerogel cells that flew through the dust coma at ∼6 km/s. Stardust collected several hundred comet particles >10 μm in size. These comet samples were delivered to Earth on January 15th, 2006. We developed a facility at the National Synchrotron Light Source at Brookhaven National Laboratory (Upton, NY, USA) for the in-situ characterization of ∼10 μm particles collected in aerogel. These analytical instruments allow us to perform extensive chemical, mineralogical, and size-frequency characterization of particles captured in aerogel. These analyses are conducted without any invasive extraction, minimizing the possibility of contamination or particle loss during preparation. This facility was used to determine the chemical composition, the oxidation state, the mineralogy and to provide an indication of the grain size of the Wild-2 particles before they were removed from the aerogel. This information provides a catalog of particle types, allowing a more reasoned allocation of the particles to subsequent investigators based on a relatively detailed knowledge of the chemical composition and mineralogy of each particle. These measurements allowed a comparison of the chemical and mineralogical properties of the Wild-2 particles with other types of extraterrestrial materials, including interplanetary dust particles and meteorites. The success of in-situ analysis for Wild 2 particles demonstrates that synchrotron-based facilities will be important for the analysis of particles collected in aerogel on future earth-orbiting satellites and spacecraft.     

Cometary atmosphere (gas and dust)

There is important progress now in the identifications and measurements of primary (parent) molecules in the inner coma of Comet Halley. H₂O, CO₂ and CO are definitely in the list, CH and some complicate organic molecules are suspected. Gas production rate for water vapor is Q_H2O 10³⁰ s⁻¹. The bulk of data doesn't contradict to the Whipple model of nucleus (with clathrate modification). Pronounced spatial structure of gaseous flow in the coma was observed, but in general measured properties of neutral gas in the coma of Comet Halley are not very different from predicted. Situation for dust is different. In situ dust measurements show that size spectrum and optical properties of particles in coma are substantively declining from predicted on the base of groundbased photometry. However there are discrepancies between Vega and Giotto dust counter data. Dust in the inner coma didn't prevent the succesful imaging of nucleus by TV on Vega 1 and 2.     

The feasibility of using an L1 positioned dust cloud as a method of space-based geoengineering

In this paper a method of geoengineering is proposed involving clouds of dust placed in the vicinity of the L₁ point as an alternative to the use of thin film reflectors. The aim of this scheme is to reduce the manufacturing requirement for space-based geoengineering. It has been concluded that the mass requirement for a cloud placed at the classical L₁ point, to create an average solar insolation reduction of 1.7%, is 7.60 × 10¹⁰ kg yr⁻¹ whilst a cloud placed at a displaced equilibrium point created by the inclusion of the effect of solar radiation pressure is 1.87 × 10¹⁰ kg yr⁻¹. These mass ejection rates are considerably less than the mass required in other unprocessed dust cloud methods proposed and are comparable to thin film reflector geoengineering requirements. Importantly, unprocessed dust sourced in-situ is seen as an attractive scheme compared to highly engineered thin film reflectors. It is envisaged that the required mass of dust can be extracted from captured near Earth asteroids, whilst stabilised in the required position using the impulse provided by solar collectors or mass drivers used to eject material from the asteroid surface.     

Report on the Kiso cometary dust trail survey

Cometary dust trails were first observed by IRAS; they are widely known to be the origins of meteoric showers. A new window has been opened for the study of dust trails, using ground-based observations. We succeeded in obtaining direct images of the 22P/Kopff dust trail with the Kiso 1.05-m Schmidt telescope. Following this initial success, we have continued to perform a dust trail survey at Kiso. As a result of this survey, we have detected dust trails along the orbit of six periodic comets, between February 2002 and March 2004. The optical depth of these dust trails are 10⁻⁹ to 10⁻⁸, which is consistent with IRAS measurements. In this paper, we describe the observations and data reduction procedures, and report the brief result obtained between February 2002 and March 2004.     

Comparative study of the dust emission of 19P/Borrelly (Deep space 1) and 1P/Halley

Images obtained by the Miniature Integrated Camera and Imaging Spectrometer (MICAS) experiment onboard the Deep Space 1 spacecraft which encountered comet 19P/Borrelly on September 22nd 2001 show a dust coma dominated by jets. In particular a major collimated dust jet on the sunward side of the nucleus was observed. Our approach to analyse these features is to integrate the observed intensity in concentric envelopes around the nucleus. The same procedures has been used on the Halley Multicolour Camera images of comet 1P/Halley acquired on March 14th 1986. We are able to show that at Borrelly the dust brightness dependence as a function of radial distance is different to that of Halley. At large distances both comets show constant values as the size of the concentric envelopes increases (as one would expect for force free radial outflow). For Halley the integral decreases as one gets closer to the nucleus. Borrelly shows opposite behaviour. The main cause for Halley's intensity distribution is either high optical thickness or particle fragmentation. For Borrelly, we have constructed a simple model of the brightness distribution near the nucleus. This indicates that the influence of deviations from point source geometry is insufficient to explain the observed steepening of the intensity profile close to the nucleus. Dust acceleration or fragmentation into submicron particles appear to be required. We also estimate the dust production rate of Borrelly with respect to Halley and compare their dust to gas ratios.     

火星尘埃与探测

火星表面尘埃与太阳辐射、热辐射的相互作用直接影响火星大气的结构、热平衡和动力学过程,并会产生改变火星表面反照率和火星地貌的长期效应.火星尘埃环境还对登陆于火星表面的着陆器能源系统和光学载荷等系统构成影响.为此需开展火星大气尘埃的直接就位探测.在介绍了火星的尘埃特性与主要探测方法基础上,提出了采用微质量计技术开展火星表面尘埃就位探测的综合探测器方案.探测器包含3种传感器.尘埃累积传感器通过设置其敏感晶体表面朝上,可以探测火星表面尘埃的沉积质量与速率;荷电尘埃传感器通过加置不同极性的偏置电压,可以探测荷正电尘埃和荷负电尘埃的累积特性;磁尘传感器通过在敏感晶体后加设小型永久磁铁,可以探测磁性尘埃的累积特性.传感器感测质量范围为10^-11~10^-4g.火星尘埃综合探测器可应用于未来的火星着陆探测计划.     

Cometary constraints on the planet forming environment.

Molecular elemental and isotopic abundances of comets provide sensitive diagnostics for models of the primitive solar nebula. New measurements of the N2, NH and NH2 abundances in comets together with the in situ Giotto mass spectrometer and dust analyzer data provide new constraints for models of the comet forming environment in the solar nebula. An inventory of nitrogen-containing species in comet Halley indicates that NH3 and CN are the dominant N carriers observed in the coma gas. The elemental nitrogen abundance in the gas component of the coma is found to be depleted by a factor approximately 75 relative to the solar photosphere. Combined with the Giotto dust analyzer results for the coma dust component, we find for comet Halley Ngas + dust approximately 1/6 the solar value. The measurement of the CN carbon isotope ratio from the bulk coma gas and dust in comet Halley indicates a significantly lower value, 12C/13C = 65 +/- 9 than the solar system value of 89 +/- 2. Because the dominant CN carrier species in comets remains unidentified, it is not yet possible to attribute the low isotope ratio predominantly to the bulk gas or dust components. The large chemical and isotopic inhomogeneities discovered in the Halley dust particles on 1 mu scales are indicative of preserved circumstellar grains which survived processing in the interstellar clouds, and may be related to the presolar silicon carbide, diamond and graphite grains recently discovered in carbonaceous chondrites. Less than 0.1% of the bulk mass in the primitive meteorites studied consists of these cosmically important grains. A larger mass fraction (approximately 5%) of chemically heterogeneous organic grains is found in the nucleus of comet Halley. The isotopic anomalies discovered in the PUMA 1 Giotto data in comet Halley are probably also attributable to preserved circumstellar grains. Thus the extent of grain processing in the interstellar environment is much less than predicted by interstellar grain models, and a significant fraction of comet nuclei (approximately 5%) may be in the form of preserved circumstellar matter. Comet nuclei probably formed in much more benign environments than primitive meteorites.     

A European probe to comet Halley

A European probe to comet Halley is proposed. The probe's model payload consists of 8 scientific instruments, viz. neutral, ion and dust impact mass spectrometers, magnetometer, medium energy ion and electron analyzer, camera, dust impact detectors and plasma wave experiment. Fly-by of the comet Halley nucleus will take place on November 28th, 1985, at about 500 km miss distance. The main spacecraft serves as relay link to transmit the observed data to Earth. As probe, a modified ISEE 2 design is proposed. Because of the cometary dust hazard expected in the coma a heavy dust shield (27 kg) is required, consisting of a thin front sheet and a 3 layer rear sheet. The probe is spin-stabilized (12 rpm), has no active attitude and orbit control capability and uses battery power only to provide about 1000 Wh for a measuring phase. A despun antenna transmits up to 20 kbit/s, in X-band. The total probe mass is estimated at 250 kg. The 3 model development programme should start in mid 1981 with Phase B.     

Cometary particle impact simulation using pulsed lasers

Calibration of the DIDSY experiment momentum sensors for the GIOTTO Mission to Comet Halley requires laboratory simulation of impacts at 68 km s⁻¹ for particle mass values in the range 10⁻⁶ g to 10⁻¹⁰ g. Existing techniques for particle acceleration cannot simultaneously attain these extreme values of velocity and particle mass, making it necessary to adopt some less direct method of impact simulation. This paper considers the application of high power pulsed lasers for laboratory simulation of the momentum impulse produced by a cometary dust particle impact on the GIOTTO spacecraft.     

Transport phenomena and crystal growth of the GeSe-Xenon system for different gravitational conditions

Previous chemical vapor transport experiments of the GeSe-GeI₄ system performed under reduced gravity conditions /1/ yielded crystals of considerably improved surface and bulk morphology. In addition, the mass transport rates observed in microgravity environment were significantly greater than predicted. A quantitative thermodynamic analysis of the solid-gas phase reactions of the GeSe-GeI₄ system revealed the multi-component, multi-reaction nature of the vapor phase /2/. Continued transport studies on ground of the GeSe-GeI₄ system in the presence of inert gases provided experimental evidence for the existence of a boundary layer /2/ and its thickness dependence on GeI₄ pressure in closed tube systems. Systematic transport rate measurements for different orientations of the density gradient relative to the gravity vector demonstrated the effects of ampoule inclination on mass flux /3/. Based on a computational model for simultaneous chemical vapor transport, sublimation, and Stefan flow /3/, the excellent agreement of predicted with ground-based experimental mass transport rates over wide pressure ranges /3/ confirmed the validity of the model and the discrepancy between observed and expected transport rates of the GeSe-GeI₄ system in microgravity.