Pulsar Timing and Its Application for Navigation and Gravitational Wave Detection

Pulsars are natural cosmic clocks. On long timescales they rival the precision of terrestrial atomic clocks. Using a technique called pulsar timing, the exact measurement of pulse arrival times allows a number of applications, ranging from testing theories of gravity to detecting gravitational waves. Also an external reference system suitable for autonomous space navigation can be defined by pulsars, using them as natural navigation beacons, not unlike the use of GPS satellites for navigation on Earth. By comparing pulse arrival times measured on-board a spacecraft with predicted pulse arrivals at a reference location (e.g. the solar system barycenter), the spacecraft position can be determined autonomously and with high accuracy everywhere in the solar system and beyond. We describe the unique properties of pulsars that suggest that such a navigation system will certainly have its application in future astronautics. We also describe the on-going experiments to use the clock-like nature of pulsars to “construct” a galactic-sized gravitational wave detector for low-frequency (\(f_{GW}\sim 10^{-9} \text{--} 10^{-7}\) Hz) gravitational waves. We present the current status and provide an outlook for the future.     

A dimension reduced INS/VNS integrated navigation method for planetary rovers

Inertial navigation system/visual navigation system (INS/VNS) integrated navigation is a commonly used autonomous navigation method for planetary rovers. Since visual measurements are related to the previous and current state vectors (position and attitude) of planetary rovers, the performance of the Kalman filter (KF) will be challenged by the time-correlation problem. A state augmentation method, which augments the previous state value to the state vector, is commonly used when dealing with this problem. However, the augmenting of state dimensions will result in an increase in computation load. In this paper, a state dimension reduced INS/VNS integrated nav-igation method based on coordinates of feature points is presented that utilizes the information obtained through INS/VNS integrated navigation at a previous moment to overcome the time rel-evance problem and reduce the dimensions of the state vector. Equations of extended Kalman filter (EKF) are used to demonstrate the equivalence of calculated results between the proposed method and traditional state augmented methods. Results of simulation and experimentation indicate that this method has less computational load but similar accuracy when compared with traditional methods.     

Mars Science Laboratory Mission and Science Investigation

Scheduled to land in August of 2012, the Mars Science Laboratory (MSL) Mission was initiated to explore the habitability of Mars. This includes both modern environments as well as ancient environments recorded by the stratigraphic rock record preserved at the Gale crater landing site. The Curiosity rover has a designed lifetime of at least one Mars year (～23?months), and drive capability of at least 20?km. Curiosity’s science payload was specifically assembled to assess habitability and includes a gas chromatograph-mass spectrometer and gas analyzer that will search for organic carbon in rocks, regolith fines, and the atmosphere (SAM instrument); an x-ray diffractometer that will determine mineralogical diversity (CheMin instrument); focusable cameras that can image landscapes and rock/regolith textures in natural color (MAHLI, MARDI, and Mastcam instruments); an alpha-particle x-ray spectrometer for in situ determination of rock and soil chemistry (APXS instrument); a?laser-induced breakdown spectrometer to remotely sense the chemical composition of rocks and minerals (ChemCam instrument); an active neutron spectrometer designed to search for water in rocks/regolith (DAN instrument); a weather station to measure modern-day environmental variables (REMS instrument); and a sensor designed for continuous monitoring of background solar and cosmic radiation (RAD instrument). The various payload elements will work together to detect and study potential sampling targets with remote and in situ measurements; to acquire samples of rock, soil, and atmosphere and analyze them in onboard analytical instruments; and to observe the environment around the rover. The 155-km diameter Gale crater was chosen as Curiosity’s field site based on several attributes: an interior mountain of ancient flat-lying strata extending almost 5?km above the elevation of the landing site; the lower few hundred meters of the mountain show a progression with relative age from clay-bearing to sulfate-bearing strata, separated by an unconformity from overlying likely anhydrous strata; the landing ellipse is characterized by a mixture of alluvial fan and high thermal inertia/high albedo stratified deposits; and a number of stratigraphically/geomorphically distinct fluvial features. Samples of the crater wall and rim rock, and more recent to currently active surface materials also may be studied. Gale has a well-defined regional context and strong evidence for a progression through multiple potentially habitable environments. These environments are represented by a stratigraphic record of extraordinary extent, and insure preservation of a rich record of the environmental history of early Mars. The interior mountain of Gale Crater has been informally designated at Mount Sharp, in honor of the pioneering planetary scientist Robert Sharp. The major subsystems of the MSL Project consist of a single rover (with science payload), a Multi-Mission Radioisotope Thermoelectric Generator, an Earth-Mars cruise stage, an entry, descent, and landing system, a launch vehicle, and the mission operations and ground data systems. The primary communication path for downlink is relay through the Mars Reconnaissance Orbiter. The primary path for uplink to the rover is Direct-from-Earth. The secondary paths for downlink are Direct-to-Earth and relay through the Mars Odyssey orbiter. Curiosity is a scaled version of the 6-wheel drive, 4-wheel steering, rocker bogie system from the Mars Exploration Rovers (MER) Spirit and Opportunity and the Mars Pathfinder Sojourner. Like Spirit and Opportunity, Curiosity offers three primary modes of navigation: blind-drive, visual odometry, and visual odometry with hazard avoidance. Creation of terrain maps based on HiRISE (High Resolution Imaging Science Experiment) and other remote sensing data were used to conduct simulated driving with Curiosity in these various modes, and allowed selection of the Gale crater landing site which requires climbing the base of a mountain to achieve its primary science goals. The Sample Acquisition, Processing, and Handling (SA/SPaH) subsystem is responsible for the acquisition of rock and soil samples from the Martian surface and the processing of these samples into fine particles that are then distributed to the analytical science instruments. The SA/SPaH subsystem is also responsible for the placement of the two contact instruments (APXS, MAHLI) on rock and soil targets. SA/SPaH consists of a robotic arm and turret-mounted devices on the end of the arm, which include a drill, brush, soil scoop, sample processing device, and the mechanical and electrical interfaces to the two contact science instruments. SA/SPaH also includes drill bit boxes, the organic check material, and an observation tray, which are all mounted on the front of the rover, and inlet cover mechanisms that are placed over the SAM and CheMin solid sample inlet tubes on the rover top deck.     

Curiosity’s Mars Hand Lens Imager (MAHLI) Investigation

The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ～5?km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a?camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ～2.1?cm to infinity. At the minimum working distance, image pixel scale is ～14?μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI’s resolution is comparable at ～30?μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.     

Ceramic ChemCam Calibration Targets on Mars Science Laboratory

The ChemCam instrument on the Mars Science Laboratory rover Curiosity will use laser-induced breakdown spectroscopy (LIBS) to analyze major and minor element chemistry from sub-millimeter spot sizes, at ranges of ～1.5–7?m. To interpret the emission spectra obtained, ten calibration standards will be carried on the rover deck. Graphite, Ti?metal, and four glasses of igneous composition provide primary, homogeneous calibration targets for the laser. Four granular ceramic targets have been added to provide compositions closer to soils and sedimentary materials like those expected at the Gale Crater field site on Mars. Components used in making these ceramics include basalt, evaporite, and phyllosilicate materials that approximate the chemical compositions of detrital and authigenic constituents of clastic and evaporite sediments, including the elevated sulfate contents present in many Mars sediments and soils. Powdered components were sintered at low temperature (800?°C) with a small amount (9?wt.%) of lithium tetraborate flux to produce ceramics that retain volatile sulfur yet are durable enough for the mission. The ceramic targets are more heterogeneous than the pure element and homogenous glass standards but they provide standards with compositions more similar to the sedimentary rocks that will be Curiosity’s prime targets at Gale Crater.     

The Radiation Assessment Detector (RAD) Investigation

The Radiation Assessment Detector (RAD) on the Mars Science Laboratory (MSL) is an energetic particle detector designed to measure a broad spectrum of energetic particle radiation. It will make the first-ever direct radiation measurements on the surface of Mars, detecting galactic cosmic rays, solar energetic particles, secondary neutrons, and other secondary particles created both in the atmosphere and in the Martian regolith. The radiation environment on Mars, both past and present, may have implications for habitability and the ability to sustain life. Radiation exposure is also a major concern for future human missions. The RAD instrument combines charged- and neutral-particle detection capability over a wide dynamic range in a compact, low-mass, low-power instrument. These capabilities are required in order to measure all the important components of the radiation environment. RAD consists of the RAD Sensor Head (RSH) and the RAD Electronics Box (REB) integrated together in a small, compact volume. The RSH contains a solid-state detector telescope with three silicon PIN diodes for charged particle detection, a thallium doped Cesium Iodide scintillator, plastic scintillators for neutron detection and anti-coincidence shielding, and the front-end electronics. The REB contains three circuit boards, one with a novel mixed-signal ASIC for processing analog signals and an associated control FPGA, another with a second FPGA to communicate with the rover and perform onboard analysis of science data, and a third board with power supplies and power cycling or “sleep”-control electronics. The latter enables autonomous operation, independent of commands from the rover. RAD is a highly capable and highly configurable instrument that paves the way for future compact energetic particle detectors in space.     

月球巡视探测器自主定向算法研究

月球巡视探测器自主导航是其能在月面执行探测任务的关键,而定向又是月球巡视探测器自主导航的一个重要组成部分,其定向精度将直接影响到月球巡视探测器定位性能。将CCD(ChargeCoupleDevice)太阳敏感器应用到月球巡视探测器上,用太阳敏感器测量太阳位置矢量,结合加速度计测量的重力矢量,利用QUEST算法推算了月球巡视探测器的姿态和航向,为月球巡视探测器构建了一套适用于长时间、长距离导航的绝对定向方案,通过理论分析和实际推算描述了该定向方案的具体实现过程,最后以仿真结果验证了该方案的可行性,为下一步月球巡视探测器定位研究提供了技术参考。     

Performance characteristics of lithium-ion cells for NASA's Mars2001 Lander application

NASA requires lightweight rechargeable batteries for future missions to Mars and the outer planets that are capable of operating over a wide range of temperatures, with high specific energy and energy densities. Due to the attractive performance characteristics, lithium-ion batteries have been identified as the battery chemistry of choice for a number of future applications, including Mars rovers and landers. The Mars 2001 Lander (Mars Surveyor Program MSP 01) will be one of the first missions which will utilize lithium-ion technology. This application will require two lithium-ion batteries, each being 28 V (eight cells), 25 Ah and 8 kg. In addition to the requirement of being able to supply at least 200 cycles and 90 days of operation on the surface of Mars, the battery must be capable of operation (both charge and discharge) at temperatures as low as -20°C. To assess the viability of lithium-ion cells for these applications, a number of performance characterization tests have been performed, including: assessing the room temperature cycle life, low temperature cycle life (-20°C), rate capability as a function of temperature, pulse capability, self-discharge and storage characteristics, as well as mission profile capability. This paper describes the Mars 2001 Lander mission battery requirements and contains results of the cell testing conducted to-date in support of the mission,     

Martian jumping rover equipped with electroactive polymer actuators: A preliminary study

This paper presents results of a preliminary study of feasibility for the application of electroactive polymer (EAP) based actuators to a robotic locomotion system, intended by the European Space Agency (ESA) to operate on the surface of Mars. The system is conceived as an elastic spherical rover, exploiting wind propulsion for surface motion, while adopting an active mechanism for vertical jumping over obstacles. The use of polymeric electromechanical devices is envisaged in order to provide actuation to such a jumping mechanism. Among the available EAP technologies, new contractile linear actuators based on dielectric elastomers arc proposed in this study as suitable devices and two potential solutions concerning their use are designed, modeled, and evaluated via numerical simulations. The best solution reveals interesting simulated performances, enabling jumping of obstacle heights corresponding to more than 7% of the diameter of the rover     

Autonomous airborne navigation in unknown terrain environments

We address the issue of autonomous navigation, that is, the ability for a navigation system to provide information about the states of a vehicle without the need for a priori infrastructure such as GPS, beacons, or a map. The algorithm is known as simultaneous localisation and mapping (SLAM) and it is a terrain aided navigation system (TANS) which has the capability for online map building, and simultaneously utilising the generated map to bound the errors in the navigation solution. Since the algorithm does not require any a priori terrain information or initial knowledge of the vehicle location, it presents a powerful navigation augmentation system or more importantly, it can be implemented as an independent navigation system. Results are first provided using computer simulation which analyses the effect of the spatial density of landmarks as well as the quality of observation and inertial navigation data, and then finally the real time implementation of the algorithm on an unmanned aerial vehicle (UAV).     

First Mars outpost power systems

Research into potential power systems for the First Mars Outpost (FMO) was performed. The author examined a representative mission architecture which was developed by NASA to determine power system requirements. Power system options including nuclear, isotope, photovoltaic (PV), chemical heat engine, and regenerative fuel cell (RFC) concepts were identified for potential Mars surface applications. A top-level characterization study was conducted to determine power system mass and area for each application. It is seen that PV systems are generally not suited for Mars surface applications due to the large surface area required and higher mass than a closed Brayton cycle SP100 reactor system. A reactor is currently being considered by NASA Lewis Research Center to provide power for base architectures including an ISRU (in situ resource utilization). An oxygen/methane powered heat engine would provide 40 kWe of emergency power for the habitat. A dynamic isotope power system (DIPS) is the current choice for a long-duration pressurized rover due to the excessive size of a PV/RFC system and higher mass of a heat engine system. DIPS has advantages for other low power systems due to its neatly immediate availability and flexibility (night or day power; no recharging required)     

Data mining as a foundation for science-enabling autonomy

In-situ exploration by spacecraft and planetary rovers will increasingly require knowledge "on demand" in the future as downlinlk constraints limit the amount of information that can be transmitted from these platforms back to Earth. Several on-board processing methods have the potential to significantly enhance scientific results in these settings. They include automatic detection Of natural satellites of planetary bodies, investigation of possible surface motions on planets and planetary moons, and directed acquisition Of scientific data by planetary rovers. The key ingpredient in all three cases is the need to process scientific data directly on-board, so that information can be rapidly provided to an automated spacecraft ex~ecutive and/or to ground-based Principal Inesiators (pis). We discuss, herein, recent developments in data mining technology that were designed initially for ground-based scientific data analysis. We then outline how these ideas can be migrated to on-board platforms to dramatically enhance the scientific capabilities of autonomous spacecraft.     

Urey: Mars Organic and Oxidant Detector

One of the fundamental challenges facing the scientific community as we enter this new century of Mars research is to understand, in a rigorous manner, the biotic potential both past and present of this outermost terrestrial-like planet in our solar system. Urey: Mars Organic and Oxidant Detector has been selected for the Pasteur payload of the European Space Agency’s (ESA’s) ExoMars rover mission and is considered a fundamental instrument to achieve the mission’s scientific objectives. The instrument is named Urey in recognition of Harold Clayton Urey’s seminal contributions to cosmochemistry, geochemistry, and the study of the origin of life. The overall goal of Urey is to search for organic compounds directly in the regolith of Mars and to assess their origin. Urey will perform a groundbreaking investigation of the Martian environment that will involve searching for organic compounds indicative of life and prebiotic chemistry at a sensitivity many orders of magnitude greater than Viking or other in situ organic detection systems. Urey will perform the first in situ search for key classes of organic molecules using state-of-the-art analytical methods that provide part-per-trillion sensitivity. It will ascertain whether any of these molecules are abiotic or biotic in origin and will evaluate the survival potential of organic compounds in the environment using state-of-the-art chemoresistor oxidant sensors.     

嫦娥三号巡视器的惯导与视觉组合定姿定位

针对“嫦娥三号”的“玉兔号”巡视器在月面未知环境中避障与安全行进的要求,分析和阐述了“玉兔号”巡视器在地面遥操作中心的控制下利用惯导和视觉组合进行月面导航与精确定位的实现方法,并结合现有的导航定位研究对“玉兔号”巡视器导航与定位的工程创新性进行了总结,阐明了惯导定位和视觉定位技术在“玉兔号”巡视器月面探测过程中的工程应用特点.最后,通过“玉兔号”巡视器着月点的精确定位实验,验证惯导和视觉相结合的定位方法的有效性,定位精度近似达到总行驶里程的1％,这对“玉兔号”巡视器开展月面探索和准确抵达科学目标位置具有重要作用.     

崎岖地形中关节式月球车姿态估计数值求解方法

 以被动关节式地形自适应月球车为研究对象,融合关节机器人D-H坐标建模方法构建了月球车悬架运动学模型和以侧倾、俯仰和偏转角表示姿态的欧拉角方式建立了车轮到世界坐标系的悬架完整表达模型。利用悬架完整表达模型,用带有迭代因子的连续迭代和离散迭代数值求解方法,建立了光滑和离散崎岖地形姿态估计算法。最后以8轮扭杆双摇杆摇臂月球车原理样机为例来验证此模型求解方法。仿真结果验证了所建立的基于数值方法的崎岖地形被动关节式月球车姿态估计模型的正确性,其求解模型精度能够满足仿真要求。     

嫦娥探测器分段渐倾转移机构设计

巡视探测器转移机构是在地外空间环境执行巡视探测器转移释放任务的空间机构。与美国、苏联转移任务不同，中国探月工程（CLEP）二期着陆器采用腿式着陆缓冲机构及巡视器顶部搭载方式，转移任务沿着陆器周向展开距离及巡视器释放高度增加，转移难度增大。在设计阶段，转移机构是否符合探测任务严苛的工程约束及设计指标；在执行阶段，转移机构能否在月面非确知环境下正常展开、转移过程是否稳定可靠，是嫦娥探测器顺利完成探测任务的关键。为保障月球后续任务及火星探测任务中转移机构的设计需要，根据巡视器转移系统特点，以探月二期工程中首次探索并成功自主设计定型的嫦娥分段渐倾转移机构为例，对巡视器转移系统的组成、任务需求及设计约束予以阐述，并结合参研人员经验，对机构研制方案的选取、关键环节设计、工程状态及任务验证情况进行说明，以为后续工作及相关工程提供参考。     

REMS: The Environmental Sensor Suite for the Mars Science Laboratory Rover

The Rover Environmental Monitoring Station (REMS) will investigate environmental factors directly tied to current habitability at the Martian surface during the Mars Science Laboratory (MSL) mission. Three major habitability factors are addressed by REMS: the thermal environment, ultraviolet irradiation, and water cycling. The thermal environment is determined by a mixture of processes, chief amongst these being the meteorological. Accordingly, the REMS sensors have been designed to record air and ground temperatures, pressure, relative humidity, wind speed in the horizontal and vertical directions, as well as ultraviolet radiation in different bands. These sensors are distributed over the rover in four places: two booms located on the MSL Remote Sensing Mast, the ultraviolet sensor on the rover deck, and the pressure sensor inside the rover body. Typical daily REMS observations will collect 180 minutes of data from all sensors simultaneously (arranged in 5 minute hourly samples plus 60 additional minutes taken at times to be decided during the course of the mission). REMS will add significantly to the environmental record collected by prior missions through the range of simultaneous observations including water vapor; the ability to take measurements routinely through the night; the intended minimum of one Martian year of observations; and the first measurement of surface UV irradiation. In this paper, we describe the scientific potential of REMS measurements and describe in detail the sensors that constitute REMS and the calibration procedures.     

Exploration of the Habitability of Mars: Development of Analytical Protocols for Measurement of Organic Carbon on the 2009 Mars Science Laboratory

The mission goal of the 2009 Mars Science Laboratory is to assess the habitability of a region on Mars. This large rover incorporates an Analytical Laboratory that contributes to this mission objective by means of a detailed characterization of mineralogy and chemistry. The Sample Analysis at Mars instrument suite in the Analytical Laboratory provides the capability to analyze volatiles released from rocks and soils and gases directly sample from the atmosphere. A primary focus of this suite is the detection and identification of organic molecules. The protocols for the extraction and analysis of organics under development for this mission are described as are experiments carried out on Mars analog samples to evaluate these methods.