Deep space travel energy sources

Exploration of the planets beyond Mars and their surroundings is already planned. Astronomy researchers are citing important information that can be obtained with instrumented spacecraft that fly beyond the planets of our solar system. Spacecraft flying these missions need power for performing their functions and communicating with Earth stations. Sunlight in these zones is so weak that alternative energy sources are needed. An alternative power source for deep-space missions is radioisotope heated energy converters.. The choice of heat-to-electric power conversion is narrowing to: 1) the Stirling engine; and 2) a combined cycle with thermionic and alkali-metal thermoelectric (AMTEC) heat-to-electricity conversion. For propulsion into deep space, a nuclear-reactor-heated AMTEC energy converter that powers ion engines can become the best alternative to hoisting tons of rockets into Earth orbit.     

Engine-driven generators for deep space probes

Summarizes important developments relating to power for deep space missions. The important alternatives to thermocouples for converting radioisotope heat into electric power are Stirling engines, alkali-metal thermal-to-electric converters (AMTEC), thermionic converters, and thermo-photovoltaic converters. The operating principles and limitations of these converters are described.     

Thermionic/AMTEC cascade converter concept for high-efficiencyspace power

This paper presents trade studies that address the use of the thermionic/AMTEC cell-a cascaded, high efficiency, static power conversion concept that appears well-suited to space power applications. Both the thermionic and AMTEC power conversion approaches have been shown to be promising candidates for space power. Thermionics offers system compactness via modest efficiency at high heat rejection temperatures, and AMTEC offers high efficiency at modest heat rejection temperature. From a thermal viewpoint, the two are ideally suited for cascaded power conversion: thermionic heat rejection and AMTEC heat source temperatures are essentially the same. In addition to realizing conversion efficiencies potentially as high as 35-40% such a cascade offers the following perceived benefits: Survivability-capable of operation in the Van Allen belts; Simplicity-static conversion, no moving parts; Long lifetime-no inherent life-limiting mechanisms identified; Technology readiness-Large thermionic database; AMTEC efficiencies of 18% currently being demonstrated, with more growth potential available; and Technology growth-applicable to both solar thermal and reactor-based nuclear space power systems. Mechanical approaches and thermal/electric matching criteria for integrating thermionics and AMTEC into a single conversion device are described. Focusing primarily on solar thermal space power applications, parametric trends are presented to show the performance and cost potential that should be achievable with present-day technology in cascaded thermionic/AMTEC systems     

Radioisotope powered AMTEC systems

Alkali Metal Thermal to Electric Converter (AMTEC) systems are being developed for high performance spacecraft power systems, including small, General Purpose Heat Source (GPHS) powered systems. Several design concepts have been evaluated for the power range from 75 W to 1 kW. The specific power for these concepts has been found to be as high as 18-20 W/kg and 22 kW/m³. The projected area, including radiators, has been as low as 0.4 m²/kW. AMTEC power systems are extremely attractive, relative to other current and projected power systems, because AMTEC offers high power density, low projected area, and low volume. Two AMTEC cell design types have been identified. A single-tube cell is already under development and a multi-tube cell design, to provide additional power system gains, has undergone proof-of-principle testing. Solar powered AMTEC (SAMTEC) systems are also being developed, and numerous terrestrial applications have been identified for which the same basic AMTEC cells being developed for radioisotope systems are also suitable     

Radioisotope AMTEC power system designs for spacecraft applications

The authors describe and compare small (two-module) and larger (16-module) AMTEC (alkali metal thermal-to-electric converter) radioisotope powered systems and describe the computer model developed to predict their performance. The high efficiency and static conversion process combined with minimized parasitic losses and operating temperatures that allow the use of current materials while still maintaining a competitive radiator area are found to make AMTEC an excellent candidate for enhanced performance space power systems. AMTEC has the capability of reducing mission costs relative to other static conversion systems because of its high efficiency. AMTEC can also reduce cost relative to dynamic systems simply by being less massive (10 to 5000 W level), and its use eliminates the torque and vibration issues of dynamic systems     

Micro-power Amtec systems

There are several terrestrial applications for energy conversion systems with electrical outputs of a few volts in the power range from hundreds of milliwatts to a few watts. Potential applications include: power for instrumentation, communication and device actuation in severe or harsh environments, as well as a variety of low duty cycle monitoring tasks for the military. For cost and/or packaging reasons, some of these applications are severely heat source limited. In this paper we describe the development and performance of AMTEC systems capable of producing 0.3 to 0.5 watts from a radioisotope heat source limited to a total thermal output of less than 4 watts, The approach utilizes a new “chimney cell” design and a thermal insulation system consisting of a specialized multi-layer insulation (MLI) package in combination with fibrous insulation. The cell operates at 0.4 W_c to over 0.5 W_c with an input surface temperature of 700°C. Measurements of the thermal performance of a readily manufactured MLI package indicate that operation at these temperatures will be achievable with a total heat input of ~4 W_th     

AMTEC electrochemical heat-to electricity conversion defies secondlaw

Sacred among the mechanical engineers is the “second law of thermodynamics,” which defines the maximum possible efficiency of an engine that converts thermal energy into mechanical power. The second law value is the difference between the engine's heat-source temperature and its heat-sink temperature, divided by the absolute value of the engine's heat-source temperature. For example, an engine setting on 0° C ice and running on steam from 100°C boiling water is not allowed to have more than 26.8% efficiency. Power-generating violators of the second law efficiency-limit range from horses to fuel cells. They do not burn fuel to generate mechanical or electrical power. The latest second law violator is the alkali-metal thermal-to-electric converter. Its efficiency approaches 25 percent. AMTEC cells and their variations were the topics of 12 papers at the 35^th Intersociety Energy Conversion Engineering Conference (IECEC) in July 2000     

High efficiency dynamic radioisotope power systems for spaceexploration-a status report

Background on the space exploration program is discussed, and the currently identified NASA exploration missions are contrasted with the missions that were being planned a year ago. Developments in high-efficiency dynamic radioisotope power systems are discussed: and Brayton and Stirling power conversion cycles are compared for the missions planned for the next decade. Issues related to the use of high-efficiency radioisotope (HER) power systems are identified. It is noted that HER power systems are approximately three times as efficient as current radioisotope thermoelectric generators(RTGs) and are therefore significantly cheaper. Additionally, the world's supply of ²³⁸Pu is extremely limited. Currently discussed missions would cut deeply into this supply if powered by RTGs     

Working medium circuit for alkali metal thermoelectric converters(AMTEC)

The possibility is studied to create a sodium circuit in an AMTEC type conversion device. The proposed circuit is based on a heat pipe that includes the evaporation-condensation cycle. Different layouts based on this principle are presented. The proposed circuit is characterized by the following advantages: no need for an electromagnetic pump; low load on the converter; and a better capability to control temperature drop at the converter     

Energy and power

Energy sources for aerospace systems include electrochemicals, mechanical rotation, solar illumination, radioisotopes, and nuclear reactors. Energy is converted to power with engines, turbines, photovoltaics, thermoelectric and thermionic devices, and electrochemical processes. Although some early spacecraft flew with battery power, for longer flights the choice has been either solar or nuclear. Manned spacecraft must have power for the total mission duration including boost into orbit, on-orbit, and subsequent re-entry. Batteries are too heavy for extended manned space missions; tradeoff study alternatives range from radioisotope heated thermionic converters to hyperbolic-fueled engines. Arrays of solar cells are the obvious choice for powering space stations and for other extended-duration missions. This article emphasizes developments for space and airplane power systems. Enabling technologies are described along with significant spin-offs and future systems     

Development of Kabila rocket: A radioisotope heated thermionic plasma rocket engine

A new type of plasma rocket engine, the Kabila rocket, using a radioisotope heated thermionic heating chamber instead of a conventional combustion chamber or catalyst bed is introduced and it achieves specific impulses similar to the ones of conventional solid and bipropellant rockets. Curium-244 is chosen as a radioisotope heat source and a thermal reductive layer is also used to obtain precise thermionic emissions. The self-sufficiency principle is applied by simultaneously heating up the emitting material with the radioisotope decay heat and by powering the different valves of the plasma rocket engine with the same radioisotope decay heat using a radioisotope thermoelectric generator. This rocket engine is then benchmarked against a 1 N hydrazine thruster configuration operated on one of the Pleiades-HR-1 constellation spacecraft. A maximal specific impulse and power saving of respectively 529 s and 32% are achieved with helium as propellant.Its advantages are its power saving capability, high specific impulses and simultaneous ease of storage and restart. It can however be extremely voluminous and potentially hazardous. The Kabila rocket is found to bring great benefits to the existing spacecraft and further research should optimize its geometric characteristics and investigate the physical principals of its operation.     

Factors Relating to the Application of Radioisotopes to Circulatory Support Systems

Radioisotope power supplies for heart assist devices and total replacements are being developed. In a radioisotopically powered artificial heart, heat from the decay of radioisotopes would be converted to fluid power to operate a blood pump. Radioisotope power sources offer the advantages of being completely implantable and having a relatively long life. Initial efforts have been directed toward developing conceptual designs of radioisotope heat engines, evaluating candidate radioisotopes fuel forms, and studying the radiation doses to be expected from the various fuel forms. Conceptual design studies indicate that a power supply capable of meeting the specifications of a circulatory support system can be developed. The most promising fuel is plutonium-238. Radiation does not appear to be a problem.     

Sliding mode control of the space nuclear reactor system

The automatic control system (ACS) of the space nuclear reactor power system TOPAZ II that generates electricity from nuclear heat using in-core thermionic converters is considered. Sliding mode control technique is applied to the reactor system controller design in order to improve robustness and accuracy of tracking of a thermal power reference profile in a start-up regime and a payload current reference profile in an operation regime. Extensive simulations of the TOPAZ II reactor system with the designed sliding mode controller showed an improvement of the reactor system performance     

The past as prologue: a look at historical flight qualificationsfor space nuclear systems

The author examines what it means to flight qualify a space nuclear system. He reviews several qualification programs, including the general-purpose heat source radioisotope thermoelectric generators (GPHS-RTGs) as developed for the Galilee and Ulysses missions, the SNAP-10A space reactor, the Nuclear Engine for Rocket Vehicle Applications (NERVA), the F-1 chemical engine used on the Saturn-V, and the Space Shuttle Main Engines (SSMEs). Similarities and contrasts are noted     

Applications of Brayton cycle technology to space power

The Closed Brayton Cycle (CBC) power conversion cycle can be used with a wide range of heat sources for space power applications. These heat sources include solar concentrator, radioisotope, and reactor. With a solar concentrator, a solar dynamic ground demonstration test using existing Brayton components is being assembled for testing at NASA Lewis Research Center (LeRC). This 2-kWe system has a turbine inlet temperature of 1015 K and is a complete end-to-end simulation of the Space Station Freedom solar dynamic design. With a radioisotope heat source, a 1-kWe Dynamic Isotope Power System (DIPS) is under development using an existing turboalternator compressor (TAC) for testing at the same NASA-LeRC facility. This DIPS unit is being developed as a replacement to Radioisotopic Thermoelectric Generators (RTGs) to conserve the Pu-238 supply for interplanetary exploration. With a reactor heat source, many studies have been performed coupling the SP-100 reactor with a Brayton power conversion cycle. Applications for this reactor/CBC system include global communications satellites and electric propulsion for interplanetary exploration. applications. The CBC consists of a heater, turboalternator compressor (TAC), cooler, and recuperator. A mixture of He and Xe is used as the working fluid in the CBC system. The He provides superior heat transfer characteristics in the heater, cooler, and recuperator. The Xe adjusts the molecular weight to provide superior aerodynamic performance for maximized turbine and compressor efficiency. Cycle studies are performed to select the optimum He/Xe molecular weight or He to Xe mixture ratio. The following presents the characteristics and advantages of using the CBC for space power applications, CBC development status, characteristics and applications of the CBC with each of the heat sources, and finally performance projections     

超大功率电推进电源处理单元关键技术研究

针对深空探测等空间任务对超大功率(10kW~100kW范围)电推进系统的需求,通过对国内外超大功率电推进技术的调研,提出了一种50kW超大功率霍尔电推进系统电源处理单元（Power Processing Unit,PPU）设计方案,重点对核心的阳极电源关键技术进行研究,提出了四管Buck-Boost变换器和三相LLC谐振变换器级联的设计方案,为我国超大功率PPU的发展提供了技术参考。     

Design and integration of a solar AMTEC power system with anadvanced global positioning satellite

A 1,200-W solar AMTEC (alkali metal thermal-to-electric conversion) power system concept was developed and integrated with an advanced global positioning system (GPS) satellite. The critical integration issues for the SAMTEC with the GPS subsystems included: (1) packaging within the Delta II launch vehicle envelope; (2) deployment and start-up operations for the SAMTEC; (3) SAMTEC operation during all mission phases; (4) satellite field of view restrictions with satellite operations; and (5) effect of the SAMTEC requirements on other satellite subsystems. The SAMTEC power system was compared with a conventional planar solar array/battery power system to assess the differences in system weight, size, and operations, Features of the design include the use of an advanced multitube, vapor anode AMTEC cell design with 24% conversion efficiency, and a direct solar insolation receiver design with integral LiF salt canisters for energy storage to generate power during the maximum solar eclipse cycle, The modular generator design consists of an array of multitube AMTEC cells arranged into a parallel/series electrical network with built-in cell redundancy. Our preliminary assessment indicates that the solar generator design is scaleable over a 500 to 2,500-W range. No battery power is required during the operational phase of the GPS mission. SAMTEC specific power levels greater than 5 We/kg and 160 We/m² are anticipated for a mission duration of 10 to 12 years in orbits with high natural radiation backgrounds     

Ultracapacitors + DC-DC converters in regenerative braking system

An ultracapacitor system for an electric vehicle has been implemented. The device allows higher accelerations and decelerations of the vehicle with minimal loss of energy and minimal degradation of the main battery pack. The system uses a DC-DC power converter, which is connected between the ultracapacitor and the main battery pack. The design has been optimized in weight and size, by using water-cooled heat sinks for the power converter, and an aluminum coil with air core for the smoothing inductance. The ratings of the ultracapacitor are: nominal voltage: 300 Vdc; nominal current: 200 Adc; capacitance: 20 Farads. The amount of energy stored allows us to have 40 kW of power during 20 seconds, which is enough to accelerate the vehicle without the help of the traction batteries. The vehicle uses a brushless DC motor with a nominal power of 32 kW and a peak power of 53 kW. A control system based on a Digital Signal Processor (DSP) manipulates all the aforementioned variables and controls the Pulse Width Modulation (PWM) switching pattern of the converter transistors. The car used for the implementation of this system is a Chevrolet LUV truck.     

恒温热源条件下实际回热式布雷顿循环的功率密度优化

计人工质与高、低温侧换热器和回热器的热阻损失、压气机和涡轮机中不可逆压缩和膨胀损失及管路系统中的压力损失，用有限时间热力学方法，导出了恒温热源条件下实际回热式布雷顿循环功率密度与压比间的解析式，借助于数值计算，研究了高、低温侧换热器和回热器的热导率分配对最大功率密度的影响。     

A Design for Thick Film Microcircuit DC-to-DC Converter Electronics

The design concept for thick film microcircuit dc-to-dc converter electronics used in the power subsystem of the Thermoelectric Outer Planet Spacecraft is presented. Microcircuits have been used in low power logic circuits for nearly ten years, but only recently have these techniques been applied to power subsystem circuits which operate at higher power levels. Thick film microcircuit techniques have been utilized in a dc-to-dc converter reducing weight by 70 percent, volume by 80 percent, and interconnections by 75 percent. The close piece-part spacing allowed short interconnections and lower dissipation, and reduced noise coupling. The developed microcircuit handled total power levels from one watt to twenty-five watts.