一种针对恒模信号的运动单站直接定位算法

相比于常规的"测向+位置估计"两步定位模式,以Weiss等提出的目标直接位置确定(DPD)算法具有估计精度高、分辨能力强和无需数据关联等诸多优点。基于该类定位算法的基本理念,提出了一种利用单个运动天线阵列对恒模(即相位调制)信号的DPD算法。首先,依据最大似然(ML)准则以及恒模信号的恒包络特征,建立了相应的直接定位优化模型;接着,根据优化函数的代数特征提出了一种有效的多参量交替迭代算法,用以获得ML估计器的最优数值解;此外,推导了针对恒模信源的位置直接估计方差的克拉美罗界(CRB),从而为新算法的定位精度提供定量的理论下界。仿真实验表明:相比于已有的基于单个运动天线阵列的直接定位算法以及传统的两步定位算法,通过利用恒模信号的恒包络特征可以明显提高目标直接定位的估计精度。     

A multi-rate sensor fusion approach using information filters for estimating aero-engine performance degradation

Gas-path performance estimation plays an important role in aero-engine health management, and Kalman Filter(KF) is a well-known technique to estimate performance degradation. In previous studies, it is assumed that different kinds of sensors are with the same sampling rate, and they are used for state estimation by the KF simultaneously. However, it is hard to achieve state estimation using various kinds of sensor measurements at the same sampling rate due to a complex network and physical characteristic differences between sensors, especially in an advanced multisensor architecture. For this purpose, a multi-rate sensor fusion using the information filtering approach is proposed based on the square-root cubature rule, which is called Multi-rate Squareroot Cubature Information Filter(MSCIF) to track engine performance degradation. Soft measurement synchronization of the MSCIF is designed to provide a sensor fusion condition for multiple sampling rates of measurement, and a fault sensor is isolated by maximum likelihood validation before state estimation. The contribution of this paper is to supply a novel multi-rate informationfilter approach for sensor fault tolerant health estimation of an aero-engine in a multi-sensor system. Tests are conducted for aero-engine performance degradation estimation with multiple sampling rates of sensor measurement on both digital simulation and semi-physical experiment.Experimental results illustrate the superiority of the proposed algorithm in terms of degradation estimation accuracy and robustness to sensor failure in a multi-sensor system.     

传感器位置误差条件下的约束总体最小二乘时差定位算法

 现代定位系统中,传感器往往被安放在运动平台上,其位置无法精确得知,存在估计误差,将严重影响对目标的定位精度。针对这一问题,提出基于约束总体最小二乘(CTLS)的到达时差(TDOA)定位算法。首先通过引入中间变量,将非线性TDOA定位方程转化为伪线性方程,再利用CTLS技术,全面考虑伪线性方程所有系数中的噪声。在此基础上推导了定位方程的目标函数,再根据牛顿迭代方法,进行数值迭代,快速得到精确解。采用一阶小噪声扰动分析方法,对该算法的理论性能进行了分析,证明了算法的无偏性和逼近克拉美-罗下限(CRLB)。仿真实验表明,该算法克服了现有总体最小二乘(TLS)算法不能达到CRLB、两步加权最小二乘(two-step WLS)算法在较高噪声时性能发散的缺陷,在较高噪声时定位精度仍然能达到CRLB。     

传感器位置误差条件下仅用到达频率差的无源定位性能分析

传感器自身的位置误差对辐射源的无源定位精度可能有较大影响,详细分析并推导了在存在传感器位置误差条件下,仅使用到达频率差(FDOA)参数对辐射源定位时,定位精度的克拉美罗下限(CRLB)和均方误差(MSE).在传感器位置误差条件下,提出仅用FDOA来同时估计辐射源和传感器位置的泰勒级数方法,并证明该定位方法理论上的MSE...     

一种实现GEO卫星自主导航的方法

针对目前关于GEO卫星自主导航方法中存在的精度低、成本高、实现复杂、可行性一般的问题,提出了一种基于多天体目标信息实现GEO卫星自主导航的方法。使用星敏感器敏感恒星信息和紫外地球敏感器敏感地球信息,建立了高精度GEO轨道动力学模型,并设计了EKF算法、UKF算法以及MCMCUPF算法进行导航解算。理论分析和仿真验证表明,提出的方法精度高、实现易,是一种切实可行,有效的卫星自主导航方法。     

Passive localization by a single moving observer using TOA only with unknown SRI: Observability analysis and algorithm

Passive localization by a single moving observer using Time of Arrival (TOA) only with an unknown Signal Repetition Interval (SRI) is investigated in this paper. Observability analysis is performed first. The observability condition for uniquely determining the emitter position and SRI is derived. The conditional Cramer-Rao Lower Bound (CRLB) is also analyzed. It is found that the ambiguity of the SRI integer of the first TOA does not affect the theoretical estimation precision of the emitter position and SRI. A Reference-Fixed Differential TOA (RFDTOA)-based Iterative Maximum Likelihood Estimator (IMLE) is proposed, which only needs O(M) computational operations. Theoretical analysis and simulation results show that the Mean Square Error (MSE) of the proposed algorithm could attain the CRLB with moderate Gaussian measurement noise.     

传感器参数误差下的运动目标TDOA/FDOA无源定位算法

在运动目标无源定位系统中，许多算法的前提是精确已知传感器的位置以及速度，但实际情况下可利用的传感器的参数均会存在一些噪声扰动。针对这一问题，提出一种改进的两步加权最小二乘（TSWLS）时差（TDOA）与频差（FDOA）定位算法。该算法是一种闭式算法并且分为2步。第1步与经典的两步加权最小二乘算法相同，第2步进一步研究了额外变量与目标参数之间的关系并且建立了新的矩阵方程。随后，利用加权最小二乘技术给出了最终解。理论分析证明了在测量噪声较小时该算法能够达到克拉美罗界（CRLB）。所提算法具有计算复杂度低，实时性高的优点；另外，经过适当的维度调整，该算法同样适用于对多非相交源进行定位求解。计算机仿真进一步证明了理论分析的正确性。     

多传感器融合状态估计方法综述

随着传感器网络技术的发展，多传感器融合状态估计凭借其鲁棒性、灵活性、可扩展性以及便于故障检测等优点，长期受到国内外学者的广泛关注，并取得了大量研究成果。数据融合的方法为融合状态估计奠定了理论基础，也是早期研究的主要方向，从20世纪70年代到20世纪末，相继发展出了集中式和分散式滤波架构及相应算法。无线通信技术的成熟以及一致性算法的出现使得分布式状态估计的研究进入了快车道，自2005年以来，大量基于一致性的分布式滤波算法被提出，其中不乏实用的经典方法和优秀的开创性方法。旨在梳理多传感器融合状态估计的发展，探究从数据融合到分布式滤波的内在联系，并对一些经典方法进行了总结。     

基于置信度的自适应Kalman滤波定位方法

针对室外自主移动机器人因感知信息缺失或异常波动造成的定位失败或偏差过大的问题,设计了一种基于置信度的自适应Kalman滤波定位方法。该方法根据置信距离和置信度函数计算局部滤波器的置信度,并将其进行加权运算后作为全局滤波器的自适应因子,以得到更为准确的位姿估计。采用D—S证据理论对全局位姿进行评价,并给出单一传感器失效时的组合方案。试验结果验证了方法的有效性和鲁棒性,能满足实际定位的需要。     

Multisensor deployment using PCRLBS, incorporating sensor deployment and motion uncertainties

Recently, a general framework for sensor resource deployment (Hernandez, et. al. 2004) has been shown to allow efficient and effective utilization of a multisensor system. The basis of this technique is to use the posterior Cramer-Rao lower bound (PCRLB) to quantify and control the optimal achievable accuracy of target state estimation. In the original formulation (Hernandez, et. al. 2004) it was assumed that the sensor locations were known without error. In the current paper, the authors extend this framework by addressing the issues of imperfect sensor placement and uncertain sensor movement (e.g., sensor drift). The crucial consideration is then how these two forms of uncertainty are factored into the sensor management strategy. If unaccounted for, these uncertainties will render the output of the resource manager inaccurate and overoptimistic. The authors adjust the PCRLB to account for sensor location uncertainty, and we also allow for measurement origin uncertainty due to missed detections and false alarms. The work is motivated by the problem of tracking a submarine by adaptively deploying sonobuoys from a helicopter. Simulation results are presented to show the advantages of accounting for sensor location uncertainty within this focal domain of antisubmarine warfare. The authors note that the generic nature of the technique allows it to be utilized within other problem domains, including tracking ground-based targets using unattended ground sensors (UGSs) or unmanned aerial vehicles (UAVs)     

Multisensor resource deployment using posterior Cramer-Rao bounds

The development of a general framework for the systematic management of multiple sensors in target tracking in the presence of clutter is described. The basis of the technique is to quantify, and subsequently control, the accuracy of target state estimation. The posterior Cramer-Rao lower bound (PCRLB) provides the means of achieving this aim by enabling us to determine a bound on the performance of all unbiased estimators of the unknown target state. The general approach is then to use optimization techniques to control the measurement process in order to achieve accurate target state estimation. We are concerned primarily with the deployment and utilization of limited sensor resources. We also allow for measurement origin uncertainty, with sensor measurements either target-generated or false alarms. An example in which the aim is to track a submarine by deploying a series of constant false-alarm rate passive sonobuoys is presented. We show that by making some standard assumptions, the effect of the measurement origin uncertainty can be expressed as a state-dependent information reduction factor which can be calculated off-line. This enables the Fisher information matrix (FIM) to be calculated quickly, allowing Cramer-Rao bounds to be utilized for real-time, dynamic sensor management. The sensor management framework is shown to determine deployment strategies that enable the target to be accurately localized, and at the same time efficiently utilize the limited sensor resources.     

A Linear-correction Least-squares Approach for Geolocation Using FDOA Measurements Only

  A linear-correction least-squares(LCLS) estimation procedure is proposed for geolocation using frequency difference of arrival (FDOA) measurements only. We first analyze the measurements of FDOA, and further derive the Cram閞-Rao lower bound (CRLB) of geolocation using FDOA measurements. For the localization model is a nonlinear least squares(LS) estimator with a nonlinear constrained, a linearizing method is used to convert the model to a linear least squares estimator with a nonlinear constrained. The Gauss-Newton iteration method is developed to conquer the source localization problem. From the analysis of solving Lagrange multiplier, the algorithm is a generalization of linear-correction least squares estimation procedure under the condition of geolocation using FDOA measurements only. The algorithm is compared with common least squares estimation. Comparisons of their estimation accuracy and the CRLB are made, and the proposed method attains the CRLB. Simulation results are included to corroborate the theoretical development.     

一种新的基于TDOA与GROA的无源定位算法

针对基于到达时间差(TDOA)与到达增益比(GROA)的辐射源无源定位问题,提出了一种新的定位算法。首先通过引入一个中间变量,根据TDOA和GROA测量模型,构造一个约束加权最小二乘(CWLS)估计。由于这个CWLS问题是非凸的优化问题,现有的方法不能很好地求解。为此,提出了一种有效的方法可以求解到其全局最优解。最后,所提算法被推广到观测站存在自定位误差时的定位求解。计算机仿真结果验证了所提算法能够获得优于传统两步加权最小二乘法(2WLS)的定位性能,能够在更大的噪声条件下达到克拉美罗下界(CRLB)。     

Design and implementation of a sensorless switched reluctance drivesystem

This paper presents a new sensorless switched reluctance drive system. The drive system can perform well when the system is operated in the pulse-width modulated (PWM) region. By suitably shaping an induced voltage in an inactive phase which is adjacent to an energized phase of a switched reluctance motor (SRM), the shaft position of the rotor can be easily obtained. As a result, the position sensor can be eliminated. First, the theoretical analysis of the proposed method is presented. By systematic theoretical analysis, a voltage signal which can easily estimate the shaft position of the motor is derived. This signal is only related to the input dc voltage of the converter, and the self and mutual inductances of the motor. Then, a new method to measure the self and mutual inductances of the SRM is proposed. After that, the design for a simple circuit which can synthesize the required voltage signal for rotor position estimation is presented. Next, how a 32-bit microprocessor system is used to execute the position and speed estimation, speed-loop control, and current-commands generation is shown. A closed-loop drive system is thus achieved. Several simulated and experimental results validate the theoretical analysis. A new direction in the design and implementation of a sensorless switched reluctance drive system is presented     

一种用于仿生导航无人机航姿求解的混合滤波方法

针对现有组合导航系统易被干扰欺骗以及姿态求解精度不足的问题，设计了惯性测量单元(IMU)与偏振光传感器组成的航姿参考系统(AHRS)。同时，考虑到传统的姿态求解方法精度不高，提出了一种用于仿生导航无人机航姿求解的混合滤波方法。将Mahony滤波后的姿态值作为系统观测量，再结合扩展卡尔曼滤波(EKF)实现传感器数据的深层融合，以获得高精度的姿态角信息。实验结果表明：在静态环境下采用混合滤波方法求解的姿态值能有效滤除偏振光传感器和加速度计内部噪声干扰，其稳定性明显优于两种方法各自求解时的情况；在动态实验中该方法能有效抑制单独采用Mahony滤波时存在的超调问题，表现出更高的动态解算精度，从而为偏振光组合导航系统提供了更精确的姿态估计信息。     

涡扇发动机风扇及压气机特性监测中的流量估算方法

为了监测风扇及压气机的特性漂移,提出了一种气体流量估算方法.这种方法通过联立求解内、外涵出口静压平衡关系、尾喷口流量关系及焓增流量关系4个流量平衡方程,对气体流量进行估算.同时,通过计算确定传感器偏差标志参数,可区分隔离传感器误差对流量估算的影响.仿真了不同状态下部件特性及传感器误差分别漂移2%的情况,结果表明,这种方法可以监测到风扇、压气机的特性漂移,并将其与传感器误差漂移有效区分.      

KUPS: Knowledge-Based Ubiquitous and Persistent Sensor Networks for Threat Assessment

We propose a knowledge-based ubiquitous and persistent sensor network (KUPS) for threat assessment, in which "sensor" is a broad characterization. It refers to diverse data or information from ubiquitous and persistent sensor sources such as organic sensors and human intelligence sensors. Our KUPS for threat assessment consists of two major steps: situation awareness using fuzzy logic systems (FLSs) and threat parameter estimation using radar sensor networks (RSNs). Our FLSs combine the linguistic knowledge from different intelligent sensors, and our proposed maximum-likelihood (ML) estimation algorithm performs target radar cross section (RCS) parameter estimation. We also show that our ML estimator is unbiased and the variance of parameter estimation matches the Cramer-Rao lower bound (CRLB) if the radar pulses follow the Swerling II model. Simulations further validate our theoretical results.     

基于自联想网络的发动机传感器解析余度技术

本文提出了一种基于自联想神经网络的传感器解析余度技术。在这种网络中,冗余传感器的信息被压缩、重组进入网络的第一部分,网络的第二部分将压缩信息恢复出来。基于数据融合原理,若一个传感器发生故障,其它传感器仍可提供足够的信息代替发生故障的传感器。理论分析和用于涡轴发动机的仿真结果表明,这种特殊结构的自联想网络具有良好的过滤噪声和故障信号的作用,特别适合于用作不易建模的复杂对象的传感器信号重构     

基于最大似然估计的TDOA/FDOA无源定位偏差补偿算法

在到达时差/到达频差(TDOA/FDOA)无源定位系统中,定位问题的非线性使得定位的结果存在偏差,特别是在噪声较大或者接收站布站不合理的情况下,定位的偏差尤其显著。针对这一问题,提出了一种基于最大似然估计的偏差补偿算法。该方法分为3步:首先,利用最大似然估计器对目标的位置和速度进行求解;其次,通过利用目标定位的估计值和含噪的测量值,对目标的位置和速度偏差值进行理论分析和推导;最后,将最大似然估计解减去理论偏差值,得到经过偏差补偿的新的目标定位解。理论分析和实验仿真证明,在一定噪声的情况下,所推导的目标位置和速度的理论偏差值与实际偏差值相符,并且经过偏差补偿后的定位算法,在保持目标定位的均方根误差(RMSE)与原最大似然算法一致的情况下,目标的位置和速度偏差值远远小于原最大似然算法的偏差值,目标定位精度得到了有效的提高。     

An efficient method of passive emitter location

The problem of locating a stationary emitter from passive bearing and frequency measurements taken by a moving and autonomously operating sensor along its trajectory is considered. The estimation procedure based on bearings only is quite different from that based on frequency measurements. From the Cramer-Rao (CR) analysis of the single-measurement case, the characteristic features of each method become transparent and an intuitive understanding of both methods is provided. One of the major results is that the orientation of the error ellipses of the bearings method (BM) and frequency method (FM) differ significantly. From this a considerable integration gain in accuracy results, when processing the combined set of bearing and frequency measurements. The results of the theoretical CR analysis are verified in a numerical simulation based on the maximum-likelihood (ML) estimation. The simulations demonstrate that a combined method is definitely superior to BM and FM with respect to the bias and the size of the error ellipses