月球着陆器悬停阶段相对自主导航方法

月球着陆器着陆阶段导航信息分析是实现安全软着陆月面的一个关键.针对悬停阶段导航信息的要求,根据月球着陆器携带的仪器设备及其获取月面信息的特点,利用激光测距仪和光学导航相机进行光学相对导航.首先建立相对导航坐标系;其次根据各个坐标系之间的关系确定各转换矩阵和导航信息,估算着陆器相对月面着陆点的位置和姿态;最后通过仿真实验对该方法进行验证.结果表明,将激光测距仪和光学导航相机在着陆悬停阶段获取的月面信息进行融合,能快速、精确进行相对位置、姿态计算;对我国下一步的探月有重要应用价值,并可应用于火星探测和其他小行星探测的软着陆的近距相对导航.      

Beagle 2: a proposed exobiology lander for ESA's 2003 Mars Express mission.

The aim of the proposed Beagle 2 small lander for ESA's 2003 Mars Express mission is to search for organic material on and below the surface of Mars and to study the inorganic chemistry and mineralogy of the landing site. The lander will have a total mass of 60kg including entry, descent, and landing system. Experiments will be deployed on the surface using a robotic arm. It will use a mechanical mole and grinder to obtain samples from below the surface, under rocks, and inside rocks. Sample analysis by a mass spectrometer will include isotopic analysis. An optical microscope, an X-ray spectrometer and a Mossbauer spectrometer will conduct in-situ rock studies.     

基于多工况的新型着陆器软着陆性能优化

以新型腿式着陆器为研究对象,建立其刚柔耦合动力学分析模型,实现着陆器软着陆过程的仿真。通过仿真计算,确定着陆器最易翻倒、底面最易与星球表面岩石碰撞、主体承受最大碰撞力的3组恶劣着陆工况。分析着陆器缓冲机构构型选取设计变量,基于仿真得到的3组恶劣工况,应用第二代非劣排序遗传算法(NSGA-Ⅱ)实现着陆器软着陆性能的优化,优化目标为增强着陆器抗翻倒能力、降低着陆器底面与星球表面岩石碰撞的可能性、降低着陆器主体最大受力值。将优化所得参数代入模型重新进行仿真,着陆器不再发生翻倒,着陆平台底面与星球表面最小距离提高4.2%,主体最大受力值降低12.1%。     

The dynamical environments analysis of surface particles for different shaped asteroids

Asteroids are coming to be a popular topic in the areas of astrophysical studies and deep space exploration recently. However, surface dynamics of asteroids is still a difficult problem. This paper aims at the motion analysis of surface particles for different asteroids. The dynamical analysis method of particles’ movement is given for three parts: global motion trend, local motion trend and static analysis. A dimensionless parameter ζ is defined to distinguish the predominant term to determine the distribution of effective potential. Three kinds of common asteroids: spheroidal asteroid, spindle-shaped asteroid and dumbbell-shaped asteroid are all discussed for those three parts with different parameter ζ. The motion trend of particles on the surface of each kind of asteroid is given. The static analysis of surface particles for different asteroids is also illustrated. Based on them, some common rules for different shaped asteroids are revealed. This paper could not only provide a reference for asteroid exploration missions but also be meaningful for the research of morphologic evolution of asteroids.     

嫦娥五号探测器GNC系统设计

为实现我国首次月球样品无人采样返回任务,设计了嫦娥五号(Chang’E 5)探测器制导、导航与控制(GNC)系统.根据任务要求和探测器特点,GNC系统设计分为轨道器GNC子系统、返回器GNC子系统和着上组合体GNC子系统.给出了嫦娥五号探测器GNC系统的架构设计、工作模式以及在轨飞行结果.结果表明,GNC系统设计正确,成功完成了动力下降、起飞上升、交会对接、返回再入等关键动作,实现了月球表面起飞上升、月球轨道交会对接以及携带月壤以近第二宇宙速度二次再入返回的三项首次任务,各项功能性能满足任务要求.     

On tethered sample and mooring systems near irregular asteroids

A tethered asteroid sample and mooring system is investigated in this paper. In this system the spacecraft is moored to the surface of an irregular asteroid such as 216 Kleopatra by using a rocket-propelled anchor with a cable. The rocket-propelled anchor is a kind of space penetrator, which can inject into asteroids at high speeds generated by its own rocket engine. It can be used to explore the interior structure of asteroids, and it can also be used as a sample collector. When the sampling mission is done, the sample can be pulled back to the spacecraft with the anchor. Using this method, the spacecraft can be kept in a safe region in which it cannot be trapped by the gravitational field of the asteroid. This work is concerned with the dynamics of the tethered system near irregular asteroids. First, a shape model and gravitational field model of irregular asteroids are built. Then, the configuration and the stability of the tethered system are investigated, and the quasi-periodic motion near the equilibrium point of the tethered system is analyzed. Finally, the non-uniform density distribution of the asteroids is considered. The deployment process and the oscillation of the tethered system in the uncertain asteroid gravity field are simulated using the Monte Carlo method. The feasibility of the tethered asteroid sample and mooring system is proved.     

A sample collector for robotic sample return missions III: Impact survivability studies

Laboratory impact tests have been performed on experimental versions of a proposed robotic sample collector for extraterrestrial samples. The collector consists of a retractable aluminum ring containing an impregnable silicone compound that is pressed into the surface of the body to be sampled. As part of a comprehensive program to evaluate this idea, we have performed tests to determine if the samples embedded in the collector medium can survive the impact forces experienced during direct reentry, such as that of the recent Genesis sample return mission. For the present study, samples of sand, rock, glass, and chalk were subjected to decelerations of 1440–2880 g using drop tests. We found that even the most fragile samples, chosen to be representative of a wide range of the types of materials found on the surface of asteroids that have currently been studied, can withstand impacts of the intensity experienced by a sample return capsule during direct reentry.     

Methods and measurements to assess physical and geochemical conditions at the surface of Europa

An international effort dedicated to the science exploration of Jupiter system planned by ESA and NASA in the beginning of the next decade includes in-depth science investigation of Europa. In parallel to EJSM (Europa-Jupiter System Mission) Russia plans a Laplace-Europa Lander mission, which will include another orbiter and the surface element: Europa Lander. In-situ methods on the lander provide the only direct way to assess environmental conditions, and to perform the search for signatures of life. A critical advantage of such in situ analysis is the possibility to enhance concentration and detection limits and to provide ground truth for orbital measurements. The science mission of the lander is biological, geophysical, chemical, and environmental characterizations of the Europa surface. This review is dedicated to methods and strategies of geophysical and environmental measurements to be performed at the surface of Europa, and their significance for the biological assessment, basing on the concept of a relatively large softly landed module, allowing to probe a shallow subsurface. Many of the discussed methods were presented on the workshop “Europa Lander: Science Goals and Experiments” held in Moscow in February 2009. Methods and instruments are grouped into geophysical package, means of access to the subsurface, methods of chemical and structural characterization, and methods to assess physical conditions on the surface.     

嫦娥四号任务科学目标和有效载荷配置

嫦娥四号探测器由中继星、着陆器和巡视器组成.其科学目标为:月基低频射电天文观测研究,月球背面巡视区浅层结构探测研究以及月球背面巡视区形貌与矿物组分探测研究.共配置6台有效载荷设备,其中3台载荷设备配置在着陆器上,分别为降落相机、地形地貌相机和低频射电谱仪,其余3台配置在巡视器上,分别为全景相机、测月雷达和红外成像光谱仪.本文主要论述了嫦娥四号任务的科学目标、着陆区概况、有效载荷配置及系统设计、各有效载荷任务和主要技术指标等.      

Study the influence of anchoring parameters on asteroid drilling anchoring with discrete element simulation

Asteroid exploration has become a research hotspot, and anchoring probes to asteroids is essential for in situ scientific detections. The influence of ultrasonic drilling force-closure anchoring parameters on the anchoring performance and its influence mechanism are studied based on discrete element simulation. An anchoring simulation model is established after calibrating virtual asteroid soil, and its validity is verified by anchoring experiments. Discrete element simulations are performed to study the effect of cross-sectional shape and longitudinal cross-sectional shape of anchoring rods on anchoring force. The internal influence mechanism of anchor configurations on the anchoring force is analyzed by extracting the number of stressed particles in the simulation area. The anchoring force has a positive correlation with the cross-sectional area. The rotation of non-circular anchors causes fluctuations in the anchoring force. The effect of the anchored material strength on the anchoring force is studied with the calibrated virtual asteroid soil. The relationship between anchoring force and anchoring parameters is studied, and the optimal anchoring angle is 54° for anchored material strength of 100 kPa. Finally, the variation of the anchoring force with the direction of external force is studied. This work can guide the anchor configuration design and the anchoring condition parameter optimization.     

Effects of restitution,friction, and attitude on 2D low-velocity rigid-body impacts

The impact of nonspherical bodies is complex, even at low velocities where contacting bodies are assumed to be rigid. Models of varying complexity (e.g. finite element methods) can be used to evaluate such impacts, but it is advantageous to use impulsive models such as that by Stronge, which are computationally inexpensive and governed by (fixed) material interaction coefficients. Stronge’s model parameterizes nonspherical rigid-body impacts with energetic restitution and Coulomb friction coefficients. This model was successfully used in large-scale simulations of ballistic lander deployment to asteroids and comets, whose trajectories involve dozens of chaotic bounces. To better understand the complex dynamics of these bouncing trajectories, this paper performs a dedicated study of idealized bouncing in two dimensions and on a flat plane, in order to limit the involved degrees of freedom. Using a numerical implementation of Stronge’s model, the motion of a bouncing square is simulated with different impact conditions: the square’s impact attitude, velocity, and mass distribution as well as the surface restitution and friction coefficients. The simulation results are used to investigate how these conditions affect the bouncing motion of the square, with a distinction between first impacts with zero angular velocity and successive impacts in which the square is spinning. This reveals how a single “macroscopic” bounce that separates two ballistic arcs may often consist of multiple micro-impacts that occur in quick succession. For the different impact conditions, we show how the number of micro-impacts per macro-bounce varies, as well as the normal, tangential, and total kinematic restitution coefficients. These are different from the energetic material restitution coefficient that parameterizes the impact. Finally, we examine how the settling time and distance of the bouncing trajectories change. These trends provide insight into the bouncing motion of ballistic lander spacecraft in small-body microgravity.     

嫦娥四号着陆器月面工作遮挡应对方案研究

嫦娥四号着陆于月球背面南极 艾特肯盆地内，着陆区周围复杂地形导致测控和通信遮挡风险。针对这一问题，开展了着陆区的测控、光照遮挡分析，提出利用轨道控制策略的精细化设计来提高着陆点精度、优化月面工作程序和增加自主控制功能的设计方法,全方面降低嫦娥四号着陆器在月球背面着陆区的生存风险。该方法已通过嫦娥四号着陆器在轨验证，可以为其他深空探测任务提供参考和借鉴。     

小行星表面有机物的红外光谱探测方法

小行星的有机物记录了太阳系早期有机物的形成发展历史,为地球早期生命前体出现的研究提供了重要依据,对于研究生命起源和演化具有重要意义.本文综合分析了小行星表面可能存在的有机物成分、种类及其赋存状态,利用红外光谱开展地面模拟实验,探讨有机物的红外光谱特征及其影响因素.结果表明,不同类型有机物的红外光谱特征与其类型、结构、温...     

腿式月球着陆器静态稳定性研究

采用稳定裕度作为描述静态稳定性的物理量,推导了腿式月球着陆器各主要部分的几何参数及相对位置关系参数与着陆器静态稳定性之间关系表达式;分析了各主要参量的变化对稳定性的影响;并着重比较了三腿式与四腿式构型对稳定性的影响。分析表明在同等条件下四腿式结构较三腿式结构更稳定,可为腿式月球着陆器的设计和优化提供一定的理论依据。     

Development of a thin section device for space exploration: Rock cutting mechanism

We have developed a rock cutting mechanism for in situ planetary exploration based on abrasive diamond impregnated wire. Performance characteristics of the rock cutter, including cutting rate on several rock types, cutting surface lifetime, and cut rock surface finish are presented. The rock cutter was developed as part of a broader effort to develop an in situ automated rock thin section (IS-ARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. The rock cutting mechanism may also be useful to other planetary science missions with in situ instruments in which sub-sampling and rock surface preparation are necessary.     

基于Unity3D的月面复杂地形场景构建及模拟驾驶系统

为了验证未来复杂月面地形操控技术方案,本文基于Unity3D物理引擎对月表模型、月球物理环境以及月面光照环境进行了模拟,设计并开发了一套用于模拟月球自主进行着陆点选址以及在线航天器着陆轨迹规划的模拟系统。模拟系统的工作过程包含了：基于面阵雷达与立体相机信息融合的局部月表重建,基于3D重建结果的月表地形着陆代价的快速评估与自动着陆选址,以及使登陆器能够到达选址目标的最优燃料消耗着陆运动规划,实现了月球着陆器短距离自主选址着陆的模拟系统构建,同时也从仿真的角度初步验证了“地形重建-地形评估-自主选址-软着陆”这一自主着陆过程的可行性。     

陨石、流星体与小行星及彗星的演化关系

小行星、彗星和流星体(meteoroid)都是绕太阳公转的小天体,它们只是在轨道特性和物理-化学性质方面有所不同,流星体泛指在行星际空间运行的、质量从10~(-16)克微流星体或微尘到10~8克的所有小天体,当它们闯入地球大气时与大气剧烈碰撞而产生发光的流星(meteor)现象,落到地面的流星体残余则称为陨石或陨星(meteorite)。     

太阳系天体引力对空间引力波探测日心编队构型的影响分析

针对太极空间引力波探测任务,建立了太阳系天体引力摄动对日心编队构型影响的数学模型,利用仿真手段分析了太阳系中行星和月球、矮行星和小行星引力摄动对空间引力波探测日心编队构型的影响,提出了一种综合考虑小行星到卫星轨道距离和星等的二重筛选方法,能够快速估计小行星相对加速度的上界.分析了日心编队构型卫星初始相位角变化对太阳系天体引力摄动的影响.仿真结果表明,在行星和月球中,地球、金星和木星引力对空间引力波探测编队构型影响较大,行星和月球的引力叠加影响达到-2.78×10-11km·-2.矮行星的引力叠加影响不大于1.25×10-17km·-2,小行星引力的叠加影响不大于1.1180×10-15km·-2.另外,编队卫星受到的太阳系天体引力摄动对编队构型卫星初始相位角的变化不敏感.      

对一种月球与火星探测多程微波测量链路定轨定位的数值模拟初步分析

轨道器精密定轨与着陆器的精确定位在深空探测任务中具有非常重要的科学意义。对一种月球与火星探测多程微波测量链路的定轨定位能力进行了初步仿真分析,推导了这种多程微波测量链路的测量模型,分析了该模型的优势。模拟仿真分析结果表明,此测量跟踪模式的数据具有提升轨道精度的潜在能力,并且同时求得着陆器的位置。定量分析表明,在考虑坐标系转换误差,重力场误差,行星历表误差以及星上转发误差的情况下,模拟1 mm/s的噪声,对于月球探测器来说,轨道器的定轨精度可达几米,着陆器的定位精度有望达到分米量级;对于火星探测器来说,轨道器的定轨精度可达到数10 m,着陆器的定位精度可达到几米。