Fast calculation method for mission opportunities in orbital interception and rendezvous problems

This paper proposes a fast calculation method to solve all mission opportunities for orbital interception and orbital rendezvous under the impulse-magnitude constraint. Different from the existing search methods, the proposed method does not need to solve Lambert’s problem in the whole process. Three cases are considered for either departure time or transfer time being free, or both being free. For fixed departure time, the feasible windows of transfer time are obtained by solving a single-variable nonlinear equation only of terminal true anomaly. Similarly, for fixed interception (or rendezvous) time, the feasible windows of departure time are obtained. For free departure time and free transfer time, all mission opportunities are obtained by using a one-dimensional search strategy. The hyperbolic-transfer and the multiple-revolution cases are also analyzed. Numerical results show that the proposed method is superior to the typical pork-chop plot method and the two-dimensional launch window method in computational time.     

New Horizons Mission Design

In the first mission to Pluto, the New Horizons spacecraft was launched on January 19, 2006, and flew by Jupiter on February 28, 2007, gaining a significant speed boost from Jupiter’s gravity assist. After a 9.5-year journey, the spacecraft will encounter Pluto on July 14, 2015, followed by an extended mission to the Kuiper Belt objects for the first time. The mission design for New Horizons went through more than five years of numerous revisions and updates, as various mission scenarios regarding routes to Pluto and launch opportunities were investigated in order to meet the New Horizons mission’s objectives, requirements, and goals. Great efforts have been made to optimize the mission design under various constraints in each of the key aspects, including launch window, interplanetary trajectory, Jupiter gravity-assist flyby, Pluto–Charon encounter with science measurement requirements, and extended mission to the Kuiper Belt and beyond. Favorable encounter geometry, flyby trajectory, and arrival time for the Pluto–Charon encounter were found in the baseline design to enable all of the desired science measurements for the mission. The New Horizons mission trajectory was designed as a ballistic flight from Earth to Pluto, and all energy and the associated orbit state required for arriving at Pluto at the desired time and encounter geometry were computed and specified in the launch targets. The spacecraft’s flight thus far has been extremely efficient, with the actual trajectory error correction ΔV being much less than the budgeted amount.     

基于混合粒子群算法的上升段交会弹道快速优化设计

基于梯度搜索的高效性和粒子群搜索的随机性,提出了一种混合粒子群算法,并应用该算法研究了运载火箭上升段交会弹道快速优化设计问题.以运载火箭与目标飞行器在交会时刻的距离最小为目标函数,设计了运载火箭飞行程序,建立了运载火箭上升段交会弹道优化模型,同时分别采用混合粒子群算法、遗传算法和粒子群算法进行求解.仿真结果表明:基于本文算法对运载火箭上升段交会弹道进行优化设计,平均交会位置误差为4.137m,较遗传算法减少了17.940m,平均优化耗时488.922s,较粒子群算法缩短了2342.125s.混合粒子群算法搜索速度较快,收敛精度较高,可用于运载火箭上升段交会弹道的快速优化设计.      

基于任务安全性的亚轨道飞行器返回轨迹优化

基于高斯伪谱法,结合亚轨道飞行器返回段特点,从任务安全性的角度出发进行了返回轨迹优化研究。出于实际控制能力及安全性的考虑,采用伪控制量作为最优控制变量,摒弃了再入分段、末端区域能量管理段、航向校正圆锥等概念,引入"末端进场走廊"来描述性能指标及终端约束。仿真结果表明,在满足各种约束条件下,能够快速准确地生成亚轨道飞行器返回轨迹,同时验证了结果的可行性与最优性。     

Impact of mission requirements and constraints on conceptual launch vehicle design

The objective of this paper is to analyse the impact of mission requirements and constraints on both the optimum vehicle design and the effects on flight path selection for two types of reusable two-stage-to-orbit launch vehicles. The first vehicle type considered provides horizontal take-off and landing capabilities and is intended to be propelled by an airbreathing propulsion system during stage 1 flight. The second vehicle type assumes a vertical launch and is accelerated by a rocket propulsion system during the booster stage ascent flight. The analysis employs a design tool for simultaneous system and mission optimization. It consists of a CAD-based preliminary vehicle design tool, aerodynamic and aerothermodynamic calculation software, flight simulation programs, and a two-level decomposition optimization algorithm enabling simultaneous system and flight optimization. The results to be presented show that the cruise flight requirement for an European launched mission of the airbreathing vehicle results in a loss of 60 % payload mass as compared to a mere accelerated ascent for a near equatorial mission into the same target orbit assuming constant take-off mass. The strong dependencies of mission requirements on both the optimal vehicle design and the ascent performance are determined for the rocket-powered vehicle type by varying the inclination and altitude of the target orbit.     

交会对接任务轨道控制规划设计与实施简

针对我国空间交会对接轨道控制规划技术,研究了轨道交会优化、应急轨道控制、安全轨道防护和发射窗口规划等一系列关键问题.设计了全寿命周期交会对接任务轨道控制规划方案,从目标飞行器发射到飞船返回,对轨道控制进行了全程协同、全局优化.设计了相位、高度、圆化度多目标融合控制算法;建立了规划变量对远距离导引终点六自由度的独立控制方程;设计了标称整体规划与动态逐级规划相结合的多模式规划策略;基于导引终点整体调整和局部调整的方式,实现了正常和应急条件下天地导引交接点的动态规划;提出了基于飞行控制过程建模的导引终点精度分析方法,确定了地面导引向自主导引切换的关键判据;建立了多约束交会对接发射窗口模型,构建了多任务多年度发射窗口集合.交会对接轨道控制规划技术成功应用于神舟八号、神舟九号和神舟十号交会对接任务.     

载人登月着陆器奔月窗口搜索方法

对环月轨道共面交会的载人登月任务中,着陆器(LM)奔月零窗口与轨道参数精确快速设计方法进行了研究。任务采用人货分离奔月模式,着陆器于载人飞船到达环月轨道前抵达环月共面交会轨道,着陆器近月点一次共面减速完成近月制动。提出一种三层快速精确奔月窗口搜索方法:第一层采用地心二体轨道理论解析计算月窗口及奔月轨道参数初值,作为正确性基本参考;第二层采用改进的双二体解析动力学模型求解月窗口内奔月轨道参数变化规律;第三层采用高精度轨道动力学模型和SQP_Snopt优化求解奔月零窗口及轨道参数精确解。仿真结果表明,本文提出的三层逐级奔月窗口搜索方法能快速精确求解载人登月任务中着陆器奔月窗口及精确轨道参数,也揭示了影响着陆器奔月窗口的主次因素和规律,为中国未来载人登月工程提供参考。     

载人登月人货分运与人货合运模式对比分析

由于载人航天任务所具有的确保航天员安全的特殊属性,载人登月任务模式往往因此必须考虑救生等多种环节和因素,变得十分复杂。针对目前载人登月人货分运及人货合运两种任务模式,通过比较分析表明,从安全性、任务风险、飞船设计约束、发射窗口、测控支持复杂度方面来看,人货合运模式要优于人货分运模式,但是人货合运模式中的重型火箭如果被要求按照载人火箭标准进行设计和考核,其研制周期、经费方面的投入将会增加。     

Autonomous mission reconstruction during the ascending flight of launch vehicles under typical propulsion system failures

In recent years, Chinese Long March(LM) launchers have experienced several launch failures, most of which occurred in their propulsion systems, and this paper studies Autonomous Mission Reconstruction(AMRC) technology to alleviate losses due to these failures. The status of the techniques related to AMRC, including trajectory and mission planning, guidance methods,and fault tolerant technologies, are reviewed, and their features are compared, which reflect the challenges faced by AMRC technology...     

基于OBDD的可修航天测控系统任务可靠性分析

基于顺序二元决策图(OBDD)理论,针对航天测控系统(TT&C系统)特点定义了新的OBDD数据结构,提出了一种考虑设备可修的TT&C系统任务可靠性分析方法.通过将各测控站的时间窗口划分为不同阶段,分析各阶段内设备逻辑关系并构建阶段OBDD模型,然后将所有阶段OBDD模型合并为最终的任务OBDD模型.采用连续时间Markov链(CTMC)分析可修设备的状态转移行为,基于新的OBDD数据结构给出了任务可靠性计算算法.与Markov方法和仿真方法的对比分析结果表明:所提出的方法能够精确计算设备可修的TT&C系统任务可靠性,设备数量多于30个时算法效率高于Markov方法.      

SOHO operations and ground system

SOHO is a joint ESA/NASA mission to study the sun from its interior to, and including, the solar wind in interplanetary space. It is currently scheduled for launch in 1995. After launch SOHO with be operated from the Experiment Operations Facility (EOF) at Goddard Space Flight Center (GSFC). The EOF will consist of facilities for instrument commanding, data reception, data reduction and data analysis. In this paper the operations concepts including instrument ground commanding from the EOF and communications capabilities between the EOF and ground observatories and the public networks in general will be described.     

Space-based tactical ballistic missile launch parameter estimation

The author explores the influence of a priori uncertainties in launch time and trajectory fly-out profiles, along with sensor angle measurement errors, on the estimation of missile launch location and heading angle. An error model is developed to compute the statistics of the estimation errors using a single pair of angle measurements, one from each of two satellites, or both from the same satellite platform. The measurements and estimation methods are described, followed by a derivation of the estimation errors for the hypothetical case of perfect knowledge of trajectory and launch time. Using the ideal case as a framework, the errors are generalized to include trajectory and launch time uncertainties. The results are discussed with the aid of graphics which were run parametrically to highlight important dependencies and sensitivities     

基于弹道逃逸和小推力捕获的地月转移轨道设计

针对地月空间货运任务和环月轨道空间设施建设任务,提出一种弹道逃逸和小推力捕获相结合的新型地月轨道转移模式,并建立了一整套该类型轨道设计方法。首先,在三体模型假设下分别建立地心弹道逃逸轨道和月心小推力捕获轨道的二维极坐标动力学模型。对于弹道逃逸轨道,将地心旋转系对准角和地月转移加速速度增量作为控制变量,提出初值估计解析公式,并应用序列二次规划算法进行快速求解。对于小推力捕获轨道,以月心距为参考量设置与弹道逃逸轨道的拼接点约束,提出能量匹配方法预估飞行时间,采用最优螺旋轨道的初始伴随状态解析式预估近月点伴随变量初值。基于混合法和轨道逆推思想,采用人工免疫算法进行小推力捕获轨道求解。仿真结果表明,基于弹道逃逸和小推力捕获的地月轨道转移方式大幅降低了近月制动燃料消耗,能快速穿越地球辐射带,且飞行时间适中;同时,提出的轨道设计方法能快速搜索到基于弹道逃逸和小推力捕获的地月转移轨道,验证了该方法的有效性。     

Small-size rocket impulse-reaction launch dynamics

The method of analyzing the small-size rocket liftoff is presented. Under consideration is a system that consists of a rocket with an operating rocket engine, a launch tube, and an operating gas generator mounted in the tube under the rocket. The liftoff parameters including the rocket motion velocity inside the tube and the loads applied are calculated. The calculated and experimental data were compared and their adequate agreement is presented with respect both dynamics of rocket impulse-reaction liftoff from the launch tube and the launch velocity.     

Overview of some optimal control methods adapted to expendable and reusable launch vehicle trajectories

Launcher trajectory optimization is a complex task, especially when considering the specific problems arising in the study of reusable launch vehicles. Part of the difficulty comes from the different characteristics of the trajectory arcs which make up the vehicle's mission (constraints and controls may not be the same). Another difficulty is the necessity, in some cases, of a global optimization between ascent and re-entry phases (branching optimisation). Finally, optimization tools devoted to this task should be polyvalent and robust, as the studies of reusable launch vehicles usually cover many different concepts, and also many different trajectory cases (such as abort scenarios). The purpose of this paper is to present different approaches used in France by CNES and ONERA to solve optimal control problems in the context of launcher trajectory optimization. These approaches, which are powerful implementations of classical optimization methods, were designed to cover the needs for both expendable and reusable launchers trajectory calculation. The first optimization tool presented is OPTAX, which uses an indirect shooting method. The second and third tools presented are CNES's ORAGE and ONERA's FLOP/OLGA, which use two different variants of the gradient method. The paper describes the equations and methodology behind these tools, and also presents their advantages and drawbacks.     

无人机电磁弹射技术研究

与现有的各种无人机发射方式相比,无人机电磁弹射方式具有更多的优点,能更好地提高无人机发射效率。通过原理性分析以及导轨起飞运动学分析,对无人机电磁弹射技术进行了可行性研究。高功率脉冲电源系统释放强直电流后,电流经导轨与电枢形成回路,在回路间产生强磁场,无人机受电磁推力作用沿导轨高速运动。最后通过实例的计算数据比较,确定无人机电磁弹射技术是可行的且优点明显。     

基于混合优化的运载器大气层内上升段轨迹快速规划方法

针对运载器大气层内的最优轨迹快速规划问题,提出一种将求解最优控制问题的间接法与直接法相结合的混合优化方法。首先,基于最优控制问题的一阶必要条件,将运载器大气层内的三维最优上升问题转化为Hamiltonian两点边值问题;然后,采用直接法中能以较少的节点获得较高求解精度的Gauss伪谱法进行求解,提高算法的求解效率;最后,采用真空解析解初值及密度同伦技术,解决初值猜测与算法收敛困难的问题。仿真结果表明,混合优化算法能够准确、快速地对运载器大气层内的最优上升轨迹问题进行求解,并在计算精度与效率上均优于间接法,可应用于运载器的轨迹在线规划与闭环制导。     

基于微分进化算法的深空小推力轨道优化设计

针对多目标多任务的深空探测轨道优化设计问题,基于以太阳为主引力体的二体模型,采用电推进小推力系统,提出了将目标行星的探测方式、探测顺序、发射窗口同时进行全局优化的解决方案.依此建立小推力轨道优化设计算法模型,利用微分进化算法进行全局一体化优化设计,得出多目标多任务的一体化深空探测轨道.通过与相同条件下其他设计方法的结果比对分析得出：基于小推力推进方式并采用微分进化算法进行优化的轨道优化设计方案,在多目标多任务深空轨道一体化设计问题上具有可行性及应用价值.     

Deep Impact Mission Design

The Deep Impact mission is designed to provide the first opportunity to probe below the surface of a comet nucleus by a high-speed impact. This requires finding a suitable comet with launch and encounter conditions that allow a meaningful scientific experiment. The overall design requires the consideration of many factors ranging from environmental characteristics of the comet (nucleus size, dust levels, etc.), to launch dates fitting within the NASA Discovery program opportunities, to launch vehicle capability for a large impactor, to the observational conditions for the two approaching spacecraft and for telescopes on Earth.     

固体运载器发动机内弹道设计方法

为研究对固体运载器总体性能提升有利的发动机内弹道设计方法,建立了发动机内弹道计算模型,并选取两个燃面设计参数表征内弹道曲线构型。针对某三级固体运载器进行了仿真分析,分别以发动机冲质比最大及运载器射程最大为目标对发动机的内弹道曲线构型进行优化设计,并对这两种设计方法进行对比研究。研究结果表明,发动机性能最优并不一定会实现运载器总体性能最优,以运载器射程最大为目标,对发动机内弹道曲线构型进行优化设计,可显著提高运载器总体性能。研究成果可应用于固体运载器总体方案初步论证阶段,提升固体运载器的性能水平及方案论证效率,使固体运载器总体设计方案更具时效性和竞争性。