Nonuniform Three-dimensional Configuration Distributed SAR Signal Reconstruction Clutter Suppression

This paper deals with the problem of clutter suppression in spaceborne distributed synthetic aperture radar (D-SAR) with nonuniform three-dimensional (3D) configuration geometry. In order to make a breakthrough of the configuration limitation of the traditional space time adaptive processing (STAP) based on uniform array and improve the inhomogeneous clutter suppression performance, this paper considers signal reconstruction technique using array interpolation to process the D-SAR signal. An array interpolation signal reconstruction method based on pitching-partition is derived then a signal reconstruction 3D-STAP clutter suppression method applied to nonuniform 3D configuration is proposed. In particular, the proposed method is compared with conventional methods and the performance analysis is carried out based on simulations. The improvement factor (IF) for clutter suppression is imported and reported as a benchmark on the clutter suppression effect.     

APPLICATION OF MVP IN REAL TIME IMAGE PROCESSING

Inthe field of communication,radar and im-age processing,real- time analysis demands somuch data that the traditional method can't bear,and therefore,the focus is transitioned to parallelprocessing.MVP( made by Texas Instrument)can integrate severalfunctions into one board to re-alize the image or voice processing system whichhas been made with several boards and severalchips before.MVP has five programmable digitalsignal processors in it,and is of MIMD structure.The crossbar connects five…     

Modified Frequency Scaling Algorithm for FMCW SAR Data Processing

This paper presents a modified frequency scaling algorithm for frequency modulated continuous wave synthetic aperture radar （FMCW SAR） data processing. The relative motion between radar and target in FMCW SAR during reception and between transmission and reception will introduce serious dilation in the received signal. The dilation can cause serious distortions in the reconstructed images using conventional signal processing methods. The received signal is derived and the received signal in range-Doppler domain is given. The relation between the phase resulting from antenna motion and the azimuth frequency is analyzed. The modified frequency scaling algorithm is proposed to process the received signal with serious dilation. The algorithm can effectively eliminate the impact of the dilation. The algorithm performances are shown by the simulation results.     

Weighted adaptive filtering algorithm for carrier tracking of deep space signal

Carrier tracking is laid great emphasis and is the difficulty of signal processing in deep space communication system.For the autonomous radio receiving system in deep space, the tracking of the received signal is automatic when the signal to noise ratio(SNR) is unknown.If the frequency-locked loop(FLL) or the phase-locked loop(PLL) with fixed loop bandwidth, or Kalman filter with fixed noise variance is adopted, the accretion of estimation error and filter divergence may be caused.Therefore, the Kalman filter algorithm with adaptive capability is adopted to suppress filter divergence.Through analyzing the inadequacies of Sage–Husa adaptive filtering algorithm, this paper introduces a weighted adaptive filtering algorithm for autonomous radio.The introduced algorithm may resolve the defect of Sage–Husa adaptive filtering algorithm that the noise covariance matrix is negative definite in filtering process.In addition, the upper diagonal(UD) factorization and innovation adaptive control are used to reduce model estimation errors,suppress filter divergence and improve filtering accuracy.The simulation results indicate that compared with the Sage–Husa adaptive filtering algorithm, this algorithm has better capability to adapt to the loop, convergence performance and tracking accuracy, which contributes to the effective and accurate carrier tracking in low SNR environment, showing a better application prospect.     

Simultaneous ISAR imaging of group targets flying in formation

This paper proposes a novel inverse synthetic aperture radar(ISAR) imaging method based on second-order keystone transform(KT) and Sandglass transform for group targets flying in a formation with constant accelerated rectilinear motion in the same radar beam. First, range curvature and range walk of each sub-target among group targets are corrected by the second-order KT combined with the quadratic phase term compensation. After range alignment, the signals in each range frequency cell can be modelled as multiple chirp signals and then the Sandglass transform is utilized to cross-range imaging, which transforms the time–frequency distribution of the signals in each range frequency cell into beelines parallel to the slow time axis simultaneously. Finally, cross-range profiles of group targets in each range frequency cell are obtained via a projection of the perk of every scatterer in the two-dimensional accumulation plane onto the frequency axis. The advantage of the proposed method is that it can align range profiles of each sub-target simultaneously and image cross-range profiles directly without separating the returned signals, which simplifies the operation procedure. Simulation results are used to demonstrate the effectiveness of the proposed method.     

A novel intelligent adaptive control of laser-based ground thermal test

Laser heating technology is a type of potential and attractive space heat flux simulation technology, which is characterized by high heating rate, controlled spatial intensity distribution and rapid response. However, the controlled plant is nonlinear, time-varying and uncertainty when implementing the laser-based heat flux simulation. In this paper, a novel intelligent adaptive controller based on proportion–integration–differentiation(PID) type fuzzy logic is proposed to improve the performance of laser-based ground thermal test. The temperature range of thermal cycles is more than 200 K in many instances. In order to improve the adaptability of controller,output scaling factors are real time adjusted while the thermal test is underway. The initial values of scaling factors are optimized using a stochastic hybrid particle swarm optimization(H-PSO)algorithm. A validating system has been established in the laboratory. The performance of the proposed controller is evaluated through extensive experiments under different operating conditions(reference and load disturbance). The results show that the proposed adaptive controller performs remarkably better compared to the conventional PID(PID) controller and the conventional PID type fuzzy(F-PID) controller considering performance indicators of overshoot, settling time and steady state error for laser-based ground thermal test. It is a reliable tool for effective temperature control of laser-based ground thermal test.     

Design and Application of a DSP Controller for Giant Magnetostrictive Smart Structure

It is proposed a digital signal processing （DSP） controller used in the control system of six degree-of-freedom （DOF） giant magnetostrictive smart structure （GMSS）. Also are presented the controller design and its implementation, the embedded adaptive least mean-square （LMS） control algorithm and the real-time experiments of GMSS. Three programs are embedded in this controller. Of them are the adaptive LMS control algorithm and the other two which are used to search for the optimal values for the initial weight vectors. Moreover, the work flow and the control approach of the GMSS with the DSP controller are introduced. The experimental results indicate that the DSP controller has better control precision and real-time property, and the damping effect is up to 20 dB-30 dB.     

Design and Application of a DSP Controller for Giant Magnetostrictive Smart Structure

It is proposed a digital signal processing (DSP) controller used in the control system of six degree-of-freedom (DOF) giant mag-netostrictive smart structure (GMSS). Also are presented the controller design and its implementation, the embedded adaptive least mean-square (LMS) control algorithm and the real-time experiments of GMSS. Three programs are embedded in this controller. Of them are the adaptive LMS control algorithm and the other two which are used to search for the optimal values for the initial weight vectors. Moreover, the work flow and the control approach of the GMSS with the DSP controller are introduced. The experimental results indi-cate that the DSP controller has better control precision and real-time property, and the damping effect is up to 20 dB-30 dB.     

Multiple model particle flter track-before-detect for range ambiguous radar

The middle pulse repetition frequency（MPRF）and high pulse repetition frequency（HPRF）modes are widely adopted in airborne pulse Doppler（PD）radar systems,which results in the problem that the range measurement of targets is ambiguous.The existing data processing based range ambiguity resolving methods work well on the condition that the signal-to-noise ratio（SNR）is high enough.In this paper,a multiple model particle flter（MMPF）based track-beforedetect（TBD）method is proposed to address the problem of target detection and tracking with range ambiguous radar in low-SNR environment.By introducing a discrete variable that denotes whether a target is present or not and the discrete pulse interval number（PIN）as components of the target state vector,and modeling the incremental variable of the PIN as a three-state Markov chain,the proposed algorithm converts the problem of range ambiguity resolving into a hybrid state fltering problem.At last,the hybrid fltering problem is implemented by a MMPF-based TBD method in the Bayesian framework.Simulation results demonstrate that the proposed Bayesian approach can estimate target state as well as the PIN simultaneously,and succeeds in detecting and tracking weak targets with the range ambiguous radar.Simulation results also show that the performance of the proposed method is superior to that of the multiple hypothesis（MH）method in low-SNR environment.     

Multi-function radar emitter identification based on stochastic syntax-directed translation schema

To cope with the problem of emitter identification caused by the radar words＇ uncertainty of measured multi-function radar emitters, this paper proposes a new identification method based on stochastic syntax-directed translation schema（SSDTS）. This method, which is deduced from the syntactic modeling of multi-function radars, considers the probabilities of radar phrases appearance in different radar modes as well as the probabilities of radar word errors occurrence in different radar phrases. It concludes that the proposed method can not only correct the defective radar words by using the stochastic translation schema, but also identify the real radar phrases and working modes of measured emitters concurrently. Furthermore, a number of simulations are presented to demonstrate the identification capability and adaptability of the SSDTS algorithm.The results show that even under the condition of the defective radar words distorted by noise,the proposed algorithm can infer the phrases, work modes and types of measured emitters correctly.     

两种自适应方向图峰值副瓣控制方法比较

自适应阵列（或称自适应波束形成）目前已广泛应用到雷达、声纳和通信领域中用来抑制各种干扰（有意的干扰，杂波干扰和多用户干扰等）。在雷达应用中，为了减轻脉冲欺骗式干扰或旁瓣目标并利用单脉冲雷达来准确测量目标波达方向．要求自适应方向图具有低副瓣和稳定的主瓣形状。在实际应用中，各种失配误差将降低自适应阵列的性能．这些误差包括由于目标的波达方向不精确引起的信号指向误差，由通道失配和位置扰动引起的阵列校准误差和由小样本教引起的协方差矩阵估计误差。在此情况下，自适应波束形成的性能大大下降（干扰抑制性能变差。主瓣失真和高的副瓣）。已提出了一种基于二次约束的集成峰值副瓣控制（integrated peak sidelobe control，简称IPSC）方法。该方法可以精确地控制峰值副瓣电平并产生具有稳定的主瓣形状的自适应方向图。研究IPSC中目标信号的影响和信号消除方案以进一步提高IPSC的性能。并将IPSC方法和最新提出的基于二阶锥规划（second-order cone programming，简称SOCP）的分布式峰值副瓣控制（distfibuted peak sidelobe control，简称为DPSC）新方法在性能上进行了比较。仿真结果表明。在干扰抑制性能和方向图控制质量方面IPSC比DPSC性能优越。此外IPSC比DPSC计算高效。     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

一种基于角度-多普勒补偿的均匀圆形天线机载雷达杂波抑制方法

采用均匀圆形相控阵天线的机载雷达杂波分布随距离变化而变化,各距离单元的杂波不再满足独立同分布的条件,造成统计型空时自适应处理(STAP)器性能下降。基于此,本文建立了均匀圆形天线机载雷达模型,对其杂波分布进行了分析,得出了空间角随阵元数非线性变化的特性造成其杂波距离维分布非均匀的结论。研究了一种均匀圆形天线机载雷达杂波抑制方法,该方法先通过修正的角度 多普勒补偿(MADC)预处理消除在杂波谱中心处的非均匀,再利用基于导数更新(DBU)技术进一步减小在其他方位杂波的非均匀程度。仿真结果表明了该方法的有效性。     

基于S变换的时频特征提取与目标识别

目标的时间-频率联合分布能够很好地反映目标物理结构特征,可以作为雷达目标识别的一个有效手段。针对现有时频分析方法存在的识别率低和抗噪性能差等问题,提出一种基于S变换的空间目标回波信号电磁特征提取与识别方法。首先对目标的雷达回波进行时频分析,得出在较大方位角变化范围内和不同信噪比情况下,目标S变换的时频分布具有相对不变性的结论;然后基于这种稳定的时频分布特征,采用最小贴近度的方法进行分类识别。针对不同目标模型的仿真结果表明,该方法的识别率高于其他时频分析方法并且具有很好的鲁棒性。     

非正侧视阵列机载雷达多空间角补偿算法

 非正侧阵列机载雷达的杂波分布随距离变化而变化,各距离单元的杂波分布不再满足独立同分布条件,造成统计型空时自适应处理(STAP)处理器性能下降。本文提出了一种多空间角补偿(MSAC)的非正侧视机载雷达杂波抑制方法,该方法先通过角度-多普勒补偿(ADC)预处理以消除在谱中心处的杂波非均匀,然后采用MSAC法在多个多普勒方向使参考单元和待检测单元的杂波谱保持一致,从而进一步消除在其余方位的杂波非均匀。仿真结果表明了该方法的性能明显优于ADC法,且运算量增加不多。     

基于OTR和SHT的射频隐身雷达信号设计

为了提高雷达的射频(RF)隐身性能,结合最优匹配照射-接收机(OTR)理论与序贯假设检验(SHT)方法,提出了一种新的射频隐身雷达信号设计方法。通过发射信号了解外界环境信息,然后反馈这些信息给雷达系统,系统根据这些信息自适应设计雷达发射信号,形成一个闭环系统。以雷达目标识别为具体应用,实验仿真表明,设计的雷达信号自适应变化,减小了信号间的相关性,并且减少了照射次数,降低了辐射功率,从而实现了雷达系统的射频隐身性能。     

基于三迭代与二阶锥规划的机载MIMO雷达稳健降维STAP方法

针对机载多输入多输出(MIMO)雷达空时自适应处理(STAP)中期望目标导向矢量的失配问题,提出一种基于三迭代(TRIA)与二阶锥规划(SOCP)的稳健降维MIMO-STAP方法。首先将MIMO-STAP权矢量分解为发射、接收、多普勒3个低维权矢量的Kronecker积,然后分别限定实际发射、接收、多普勒导向矢量与假定导向矢量之间的误差范数边界,通过优化最差性能,利用SOCP对各个低维权矢量进行三迭代求解,最后进行权矢量合成。该方法在保证机载MIMO雷达获取稳健STAP性能的同时,通过三迭代降维处理,能够有效降低训练样本数需求与运算复杂度,因此更具有实际应用价值。仿真结果验证了算法的有效性。     

步进频雷达成像技术研究进展

步进频雷达发射窄带脉冲,利用多个脉冲合成宽带成像,对发射、接收分系统和信号处理平台的要求相对较低,是获得目标高分辨距离像的一种有效技术手段.从雷达系统设计和工程应用的角度出发,对目前国内外研究提出的具有代表性的几种步进频成像频域方法和时域方法进行了论述;介绍了不同处理方法在雷达波形和工作方式设计、合成宽带成像的性能、工程实现难度和适用任务场景等方面的优点和不足;探讨了各种方法工程应用的可能性.相对于其他方法,一种基于子脉冲去斜的步进频合成宽带方法在工程上更易于实施.     

基于杂波子空间估计的MIMO雷达降维STAP研究

 多输入多输出(MIMO)雷达是近年来出现的一种新体制雷达,针对MIMO体制的机载雷达开展空时自适应处理（STAP）技术研究是值得进一步努力的方向。本文研究了机载MIMO雷达STAP技术的降维算法,通过对STAP技术杂波抑制原理进行分析,推导并得到一种基于杂波子空间的降维算法。结合扁长椭球波函数（PSWF）的特点,提出了一种基于杂波子空间估计的降维算法,并与若干降维算法的杂波抑制性能进行比较。结果表明,当存在阵元幅相误差时,该算法在保持杂波抑制性能的同时能够有效地降低STAP算法的运算量。     

与空时二维自适应滤波兼容的单脉冲测角新方法

针对机载相控阵雷达系统提出了一种空时二维自适应单脉冲测角方法 ,当存在阵元和通道幅相误差时它仍具有较高的测角精度。还给出了一种稳健的自适应和、差波束增益归一化方法 ,并讨论了所提方法的简化兼容实现方案。最后给出了基于高保真雷达杂波模拟数据的仿真实验结果