共查询到20条相似文献,搜索用时 984 毫秒
1.
2.
航天器材料空间环境适应性评价与认定准则研究 总被引:7,自引:3,他引:4
航天器材料空间环境适应性是指航天器材料适应空间环境的能力,同时又是航天器系统级空间环境适应性的基础。确保航天器材料空间环境适应性是航天器研制初期重要环节。文章首先介绍了航天器材料的空间环境适应性类型;其次列举了材料空间环境适应性评价试验标准体系;然后分析了空间环境适应性评价手段与认定准则,包括选材阶段的评价试验、采购和使用阶段的验收试验以及空间环境适应性的认定。文章对我国航天器材料空间环境适应性评价与认定工作提出若干建议,为航天器材料选择和空间环境适应性控制提供参考。 相似文献
3.
4.
武器装备环境适应性要求探讨 总被引:14,自引:0,他引:14
文章介绍了环境适应性的基本概念,指出了其与可靠性的区别;阐述了武器装备环境适应性要求的内涵及其特点,介绍了环境适应性要求的类型、环境适应性要求的定量和定性表征方法、环境适应性要求与环境要求的关系,环境适应性指标体系内涵及其组成;简单介绍了环境适应性要求确定方法,最后提出了一些有益的建议。 相似文献
5.
6.
7.
文章分析了地空导弹武器装备环境适应性试验的特点,介绍了该领域以往常用的试验方法和评价/评估方法。针对装备在使用后暴露出的诸多环境不适应问题,从思想认识层面、装备论证的指标条件到具体的测试方式、样本数量、极限多应力、地理环境等方面分析了以往环境适应性试验和可靠性鉴定试验中存在的不足;对现阶段无据可依,急需采用国军标规范的内容提出了需求;分析装备鉴定改革后,环境适应性试验融入武器装备全寿命周期中的做法。从加强性能鉴定环境试验的充分性出发,提出建设多种典型环境靶场开展实地化环境试验或建设超大型环境实验室开展动态完整任务剖面试验;为充分利用多源信息,建议环境适应性试验理论研究需重点加强信息融合和参数表征。 相似文献
8.
9.
10.
武器装备环境适应性要求、环境适应性验证要求和环境条件及其相互关系的讨论(二) 总被引:3,自引:0,他引:3
文章分为两部分:第一部分论述环境适应性及其与可靠性区别,环境适应性要求及其特点,探讨环境适应性的表征方法,介绍了我国工程应用中存在的一些问题。第二部分论述环境适应性的验证要求,介绍目前型号中的“环境要求”、“环境技术要求”、“环境条件”等提法的实际含义和不足之处,并建议使用更为合理的名称;此外,通过分析装备环境适应性要求的类型和指标体系,给出了整个装备(整机)和下层产品的环境适应性指标体系框架和示例。此篇为第二部分。 相似文献
11.
12.
13.
14.
15.
16.
17.
The linear shaped charge cutting technology is an effective technology for aircraft separation. It can separate invalid components from aircrafts timely to achieve light-weight. Magnesium alloy is the lightest metal material, and can be used to cast effective light-weight components of an aircraft construction. However, the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank. In response to the demand for the linear separation of magnesium alloys, the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test. The effects of the shaped charge line density, cutting thickness, and mechanical properties on the cutting performance of the alloy are studied. The shaped charge cutting mechanism is analyzed through the notch structure. The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse. The higher the linear density is, the stronger the ability of the linear shaped charge cutter is, and the greater the penetration depth is, which is advantageous. However, the target structure will be damaged when it is too large (e.g., 4.5 g?m-1). Within 12 mm, when the cutting thickness of the target increases, the penetration depth increases. The lower the tensile strength is, the greater the penetration depth is, and the more conducive the penetration depth to the shaped charge cutting is. When the elongation (EL) increases to 12%, the collapse of the target is incomplete and the target cannot be separated. When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa, the EL is less than 6.5%, the cutting thickness is less than 12 mm, and the linear shaped charge cutting of the magnesium alloy can be achieved stably. 相似文献
18.
19.
基于误差随机过程无人飞行器的撞地概率计算公式 总被引:2,自引:0,他引:2
在误差随机过程为平稳正态过程的假设下,研究了无人飞行器撞地概率的计算问题。在已知地形数据的情况下,从理论上推导出无人飞行器只受到垂直干扰时的撞地概率的计算公式;并在仅利用地形特征参数的情况下,得到了较为简洁的计算公式,在进行无人飞行器航迹规划过程中可以实现撞地概率的实时计算。给出了无人飞行器既受到垂直干扰又受到水平干扰时的撞地概率的计算公式,并对它们的计算作了简化,得到了一个近似计算公式。讨论了撞地概率计算公式的应用问题,分析了误差随机过程的标准差、飞行器机动带宽及地形标准差对撞地概率的影响。 相似文献
20.
电磁脉冲武器已在现代战争中崭露头角,它的出现为抗击空袭飞机(包括隐身飞机)提供了一条新的思路。在分析电磁脉冲武器特点和国内外电磁脉冲武器研究进展的基础上,论述了电磁脉冲武器抗击来袭飞机(包括隐身飞机)的可行性和方法。 相似文献