共查询到18条相似文献,搜索用时 805 毫秒
1.
旋转冲压压缩转子二维进气流道数值研究 总被引:5,自引:1,他引:4
借鉴二维超声速进气道的设计方法,设计了一种旋转冲压压缩转子的二维进气流道,并采用二维雷诺平均N-S方程和Spalart-Allmaras湍流模型对其流场进行了数值仿真,研究了转速、背压对二维进气流道中波系结构、内部流动特性和性能的影响.计算结果表明:所提出的旋转冲压压缩转子二维进气流道设计方法是可行的;二维进气流道中产生的激波系与二维超声速进气道中产生的激波系相类似,所不同的是二维进气流道中产生的激波为弯曲激波,而二维超声速进气道中产生的激波为平直激波;转速和背压对二维进气流道的性能有较大影响. 相似文献
2.
3.
4.
5.
隔板截面造型对超声速膨胀器流场及性能的影响 总被引:1,自引:0,他引:1
采用三维雷诺平均N-S方程和标准k-ε湍流模型,在设计工况下对3种隔板截面形状的超声速膨胀器的三维流道流场进行了数值研究.结果表明:矩形截面形状的超声速膨胀器近吸力面区域气流速度大,斜激波之后流动损失低,等熵绝热效率较高;正梯形截面形状的超声速膨胀器出口平均绝对马赫数、静压比以及膨胀比大,综合性能相对最优;角区附面层分离、回流形成的低速气流团以及斜激波所导致高速气流的增压过程是出口流动损失的主要来源;优化隔板沿径向的结构,超声速膨胀器的综合性能有望进一步提高. 相似文献
6.
为了为三维进气道的设计提供有用的分析数据,对高超声速和超声速来流下三维进气道内激波干扰进行了理论和数值研究。进气道模型选取"箱式"以及三面侧压进气道作为研究对象。理论分析采用了"空间降维"方法,即将进气道各个角落处的三维双楔定常激波干扰问题转换为二维非定常激波干扰问题,并利用激波动力学对其进行求解。数值验证方法利用2阶NND差分格式求解三维无粘欧拉方程,网格数量为1200多万,并采用MPI并行进行计算。该理论分析方法很好地对进气道各个角落处的激波干扰波系结构进行了判别,并得到了干扰区马赫构型三波点附近以及规则构型反射点附近的解析解,理论分析结果与数值模拟结果吻合较好。此外,针对进气道截面内各个流场区域的总压恢复系数以及压力、密度和温度进行了研究,并考虑了箱式进气道和三面侧壁压缩进气道内的流场区域的非均匀性,干扰区马赫杆后的总压损失要比其他区域高10%左右。通过研究表明,"空间降维"方法适用于进气道压缩部分,将为进气道的设计和性能评估提供一种理论分析手段。 相似文献
7.
8.
《燃气涡轮试验与研究》2018,(5)
为准确掌握组合动力冲压发动机自由射流试验方法,分析有限设备能力条件下超声速进气道波系试验结果的有效性,采用数值仿真方法对截去和未截去超声速进气道上斜板的冲压发动机自由射流试验布局进行了对比分析。结果表明,超声速进气道上斜板附面层的发展将影响进气道内的气流角,且气流角的改变对冲压发动机燃烧室进口截面气动参数影响明显;截去超声速进气道上斜板的自由射流试验,可采用调整气流角的方法考虑上斜板附面层造成的影响,进而减小模拟偏差。 相似文献
9.
10.
在激波风洞中研究了激波与边界层之间相互作用对双燃式冲压发动机进行道和燃烧室冷态内部流场的影响,实验发现与现在进气道中,激波与边界层之间的相互作用产生了两侧均为超声速流的滑移面。 相似文献
11.
HAN Ji-ang 《航空动力学报》2010,25(6):1358-1365
A kind of three-dimensional flow-path of the ram-rotor was designed in this paper according to the design method of the typical supersonic intake of aircraft and missiles,especially the design method of the compression ramp,the throat and the subsonic diffuser.The design Mach number of the flow-path was based on the averaged relative Mach number,regardless of the change of incoming Mach number along radial direction of the flow-path.Then,the flowfield of the designed flow-path was simulated numerically with computational fluid dynamics software at design point.The purpose of simulation was to obtain the details of the flowfield,including the structure of the shock wave system,position of flow separation zone,and so on.The performance of the ram-rotor was also evaluated.The numerical results show the structure of the shock wave system in the flow-path is similar to that in the supersonic intake.To improve the overall performance of the ram-rotor,the reasonable compromise between the total pressure ratio and the isentropic adiabatic efficiency should be reached.The structure optimization of the flow-path and the configuration of the shock wave system have great influence on the performance of the ram-rotor. 相似文献
12.
13.
给出了一种基于非结构动网格技术的三维激波装配方法。在该方法中,三维激波面由被标记为激波属性的网格点连接构成,标记为激波属性的网格点称为激波点。激波点具有两组参数分别代表激波的上下游,利用激波点上下游参数求解R-H关系式获得激波点运动速度。非结构动网格技术的使用允许激波大幅度运动,降低了对初始激波位置的要求。通过引入网格属性定义避免了对计算网格进行分区,增加了装配激波的灵活性。通过球柱体绕流问题验证了该三维装配方法的合理性,针对三维激波装配中比较困难的交点装配问题,通过对三维激波反射以及三维激波相交等算例进行研究找到了可用的三维激波交点运动速度的确定方法,保证了激波运动过程中交点运动与流场求解之间的相容性,获得了相应的装配结果。 相似文献
14.
TWODIMENSIONALSUPERSONICSHOCKTUNNELANDITSAPPLICATIONTWODIMENSIONALSUPERSONICSHOCKTUNNELANDITSAPPLICATION¥WangShifen;Wangyu;Ta... 相似文献
15.
在激波边界层干扰中后掠柱形区的独立性原理研究 总被引:2,自引:0,他引:2
在后掠压缩角引起的三维激波边界层干扰中,柱形的上游影响区表现出准二维的流动特性。实验结果表明,在柱形区中通常的边界层独立性原理不再适用。但是,如果考虑由后掠引起的横流效应修正,柱形区中的上游影响距离的尺度和相应的二维干扰上游影响区尺度之间可以得到很好的相关关系。 相似文献
16.
旋转冲压压缩转子试验系统变工况数值研究 总被引:1,自引:0,他引:1
采用FLUENT软件对旋转冲压压缩转子试验系统通流部分进行了不同出口反压和转速下的数值模拟.结果表明:旋转冲压压缩转子特性线较为陡峭,其稳定工作范围小,相对流量宽度由26.57%降到1.96%.反压大或转速低时,导叶受旋转冲压压缩转子低压区影响减弱,反压和转速对导叶段气流损失影响不大.旋转冲压压缩转子在反压增加时,其内部气流相继经历斜激波、λ激波/激波串、λ激波/正激波、λ激波4个压缩阶段.转速增加时,压缩面区域形成的激波在机匣壁面的入射点逐渐向下游发展,旋转冲压压缩转子压比增大的同时损失增加.出口支板段随反压增加存在最小损失工况,转速增加时,其总压恢复系数由0.944逐渐降低到0.875,气流损失增加. 相似文献
17.
Simulation on effect of throat contraction ratio and strake stagger angle on flow field and aerodynamic performance of scrampressor 下载免费PDF全文
The design methods of typical supersonic aircraft intakes and shock wave compression technology have been applied to ram-rotor, an attractive compression system. A ram-rotor is of a typical structure including the compression ramp, the throat and the subsonic diffuser; a scrampressor is similar to ram-rotor, the only difference is that scrampressor has no subsonic diffuser. The work was the continuation of the preparatory work. In order to further study the effect of throat contraction ratio and strake stagger angle on the flow field and performance of a scrampressor, the flow field of a scrampressor with a three-dimensional flow path was numerically simulated with different throat contraction ratios and strake stagger angles. Simulated results indicated that the optional aerodynamic performance of a scrampressor could be achieved with an adiabatic efficiency of 0.8413 a total pressure recovery coefficient of 0.8446, a total pressure ratio of 7.14 and a static pressure ratio of 5.17 for a throat contraction ratio of 0.6 and a strake stagger angle of 12°. It was therefore concluded that an appropriate decrease in throat contraction ratio and an increase in strake stagger angle could help the comprehensive improvement of a scrampressor in performance. 相似文献