The Effects of Gaussian Interference on Communication Systemswith Adaptive Arrays

The performance of a bandlimited binary phase-shift-keyed (BPSK) communication system is examined when the received BPSK signal is corrupted by both thermal noise and a directional Gaussian noise interfering signal. The system uses an LMS adaptive array to suppress this interference. The effects of signal power levels, arrival angles, bandwidths, and the array bandwidth are examined. The performance of a system that uses tapped delay lines for the array weights is also examined. It is shown that the performance of a system with tapped delay lines is not affected by the interference bandwidth for a single interferer.     

Specification and Performance of Passive Sonar Spectral Estimators

The application of existing estimation theory to the problem of specification and performance of passive sonar spectral estimators is considered. The classification function is addressed, so that the signal is assumed to be present, and so that the energy arrival angle is known. The spatial filter considered is a line array of M equally spaced omnidirectional hydrophones. Signal and ambient noise are both zero-mean, wide-sense, stationary Gaussian random processes that differ in their spatial correlation across the face of the array. The signal is a plane wave that can be made totally spacially corrected between array elements by inserting delays between sensors to invert the signal propagation delay. The noise correlation is a function of frequency, bandwidth, element separation, and the relative time delay between sensors. Under these assumptions, the Cramer-Rao lower bound is derived for the class of unbiased estimates of signal power in a narrow frequency band at the hydrophone in the presence of correlated ambient noise of known power. The bound is examined numerically, resulting in a threshold phenomenon with M that constitutes a new design consideration. In addition, there is a striking insensitivity to realistic values of ambient noise correlation, and there are ranges in signal-to-noise ratio for which one gains more by increasing M than by increasing the bandwidth-time product. Specific processors, including a new unbiased estimator when noise power is unknown, are developed.     

Analysis of a Signal Processor for an Antenna Array

A signal processor that provides ratio-squared predetection combining, has been investigated for application in an adaptive antenna array. The analysis and experimental data presented here pertain to the signal processing gain when the antenna array is illuminated by a coherent signal source and a partially coherent noise source. For a noise source which is coherent, the processing gain depends on relative strength of the signal and noise, relative directions of arrival, and the usual "array factor." The array exhibits capturing effects much as in an FM receiver. The effective antenna pattern is a superposition of two beams of different magnitudes, one directed to the signal source and the other to the noise source. When the noise is partially coherent, the behavior of the signal processor is quite complex. Analytical prediction and experimental simulation measurement on a four-channel system indicate that the partially coherent noise may be regarded as the source of an incoherent noise component plus a coherent noise component with the magnitude of the latter determined by the coherence coefficient for the noise source.     

Analysis of an adaptive algorithm for unbiased multipath time delay estimation

The multipath equalization time delay estimator (METDE) provides an adaptive approach for estimating the difference in arrival times of a signal received at spatially separated sensors as well as the multipath channel characteristics. However, the parameter estimates of the METDE are biased in the presence of noise. The METDE algorithm is improved for unbiased parameter estimation via minimizing a modified cost function. Convergence behaviors and variances of the system variables of the amended method are derived. Computer simulations are included to corroborate the theoretical analysis and to evaluate the adaptive multipath delay estimation performance of the proposed algorithm.     

A Superlimiting Phased-Array Receiving System in a Two-Source Environment

The performance of a uniformly spaced phased-steered line array with element channel superlimiting is studied for far-field sources consisting of 1) two sinusoidal signals with different frequencies and angular locations, and 2) a sinusoid and a noise signal at different angular locations. Attention is focused on the nonlinear case where internal noise is negligible compared to both input signals. The analysis for the two-sinusoid case gives the precise frequencies, positions, and amplitudes of all apparent sources. In addition to the two active sources, the array output has an array of images arranged symmetrically in sine space about the larger input, at intervals equal to the spacing between the two active sources. For the case of a separated sinusoid and a noise source, the analysis shows that the angular positions and average powers of the array outputs duplicate the double-sinusoid results, but the images have noise-like spectra. The analyses are confirmed by experimental results obtained with a 60-element superlimiting X-band array.     

星载DBF接收天线误差校正算法

 提出了一种改进的基于子空间的星载数字波束形成（DBF）接收天线的误差校正方法。根据阵列互耦效应主要取决于阵元间的几何距离这一特点,利用阵元空间排布的对称性简化了天线的互耦模型,将天线的互耦效应及射频(RF)通道失配统一为通道间的幅相不一致。通过在基带注入特定的阵内相位差降低了子空间算法的计算复杂度。在建立7单元正六边形平面阵仿真模型的基础上,分析不同信噪比(SNR)环境下校正算法的性能,经比较得出可以通过提高发射信号功率改善误差估计的精度,验证了算法的有效性。仿真分析结果表明该算法在卫星通信系统中有一定的工程应用价值。     

基于仿生原理的超角分辨天线阵设计

以昆虫的声波超分辨定位原理为基础,提出了对应的电小仿生天线阵系统,增强了电小天线阵的角度分辨能力。在具体设计过程中,运用奇偶模分析方法,推导出在不损失功率的条件下,相位差放大因子与天线阵元的阻抗和互耦之间的约束关系,与此同时提出了可获得更大相位差放大因子的设计方法。以此理论为基础,设计了一个二元电小天线阵,仿真并测试了其角度分辨性能,测试结果与理论分析一致,有力地验证了仿生天线阵理论的正确性与设计方法的有效性。     

Adaptive Array Bandwidth with Tapped Delay-Line Processing

The bandwidth of adaptive arrays with tapped delay lines behind the elements is examined. Such processing offers improved bandw over that attainable with quadrature hybrid processing. The performance of a two-element array with four types of processing (equarature hybrids, single delay lines, 3-tap delay lines, and 5-tap delay lines) is compared. It is shown that with half-wavelength element spacing, a quadrature hybrid and single delay-line processor are inadequate at 10-percent bandwidth. A 3-tap processor is adeq however, up to 40-percent bandwidth.     

An LMS Adaptive Array for Multipath Fading Reduction

Multipath fading often poses a serious hindrance in radiocommunication. The application of a least-mean-square (LMS)adaptive array to the problem of multipath fading reduction is discussed. However, it is known that multipath components are in general correlated with one another. We examine the effect of the correlation on the performance of the LMS adaptive array. When the correlation coefficient does not equal or approximate 1, the LMS adaptive array suppresses the multipath signals significantly by nulling. On the other hand, when the correlation coefficient nearly equals 1, the LMS adaptive array prevents the output signalpower from decreasing. Therefore, the LMS adaptive array mayreduce the multipath fading effectively for any correlation coefficient value. A reference signal in the LMS adaptive array is also discussed. It is shown that synchronization in the referencesignal generation must be extremely accurate. Moreover, aprocessor configuration is proposed which may generate thereference signal with the required accuracy.     

The Effect of Clipping on the Performance of a Phased-Array Antenna in an Aniso-tropic Background

The effect of an anisotropic reverberation pattern on the performance of various signal processing systems for linear sonar arrays was studied. It was determined that the use of clipping at each array element could seriously affect the performance of the system in comparison on to a similar analog system.     

DOA estimation under unknown mutual coupling and multipath

We propose a new method for direction of arrival (DOA) estimation in the presence of multipath propagation and mutual coupling for a frequency hopping (FH) system. With the use of pilot symbols and assuming perfect time-frequency synchronization for a linear array, we take mutual coupling and multipath propagation into account, and derive a maximum likelihood (ML) estimator for both the mutual coupling matrix and DOA estimation. We then formulate an iterative alternating minimization (AM) algorithm for finding the mutual coupling and DOA parameters in an alternate manner. Simulation results illustrating the performance of the algorithm and comparison with the Cramer-Rao bound (CRB) are also presented.     

Postfiltering in Digital Beamformers

Assuming a sinusoidal signal superimposed on a narrow-band Gaussian noise as the input to a receiving array, the output power and signal-to-noise ratio of a digital beamformer with postfiltering were formulated so that subsequent calculations could be made without an analysis in the frequency domain. The formulation utilized the quantizer functions previously given by the author and certain spectral power distribution factors originally attributed to Davenport but more rigorously derived and discussed in the present work. A numerical study based on this formulation for a DIMUS array in a correlated noise field reveals that except for certain rare circumstances, postfiltering generally improves the output SNR or array gain. It is demonstrated that the amount of postfiltering gain not only varies with array input SNR but also depends strongly upon the spacing-to-wavelength ratio, and its meaningful interpretation can only be made in conjunction with both the clipping and noise correlation losses. In particular, balancing postfiltering gain against the two losses suggests that receiving arrays with element spacings smaller than one-half of the operating wavelength may be used to the advantage of system design under certain conditions.     

4×4单元面阵自适应天线系统的设计与实现

面阵系统所采用阵元数多,数据量大,对信号处理机的实时处理能力要求非常高。系统采用基于参考信号的LMS算法,收敛速度较快、运算量低．且易于硬件实现。系统平台采用目前流行的DSP＆FPGA架构,具有高速运算和处理能力,解决了面阵系统对实时处理机的苛刻要求。测试结果表明,系统能自适应地控制天线阵列方向图在用户信号方向产生高增益波束,在干扰信号方向产生较深零陷,并实现零误码率通信。     

The Segmented Aperture Synthetic Aperture Radar (SASAR)

A new concept in synthetic aperture radar, called SASAR, which uses a segmented aperture, is described. Use of the segmented aperture allows appreciable extra receiving antenna gain to be realized. Each subarray of the receive antenna is equal in length to the transmit antenna; the system performance is increased approximately by a factor equal to the number of subarrays. To allow array combination of the subarray signal outputs requires a phase-shift factor (varying with azimuth) to be applied to each subarray signal. A digital implementation of this preprocessor is sketched out; it uses a push-down storage stack to store the range histories for a synthetic aperture from each subarray. Appropriate phase shifts are added to the stacks and a sum of stack values then provides the combined output range history sequence. Possibilities of using analog delay lines for preprocessing are also discussed. Pattern errors due to subarray size and receive array near field are examined and constraints are given.     

GPS多径信号的自适应滤波估计方法

 研究全球定位系统(GPS)多径信号估计的问题。通过分析自适应滤波器的原理,建立了数字中频信号处理的数学模型,提出一种用自适应滤波实现GPS多径幅度、码相位和载波相位估计的方法。该方法采用不同延迟的伪随机序列对信号进行解扩、解调和累加,得到了作为期望信号的系列自适应滤波相关值。对该方法与其他3种方法进行了理论上的分析比较,得出本方法具有信噪比高、自适应滤波性能好、带有码相位信息和不存在载波模糊度问题等优点。根据各种滤波器算法的特点和本应用的需求,给出了选用递归最小二乘算法实现的方法。通过计算机仿真,验证了提出的方法能够在14 dB的信噪比下,以1个采样间隔的时间延迟分辨率和0.005周的载波相位估计精度估计出GPS L1的多径信号。     

Detection of Known Signals in Nonstationary Noise

The basic design of a nonlinear, time-invariant filter is postulated for detecting signal pulses of known shape imbedded in nonstationary noise. The noise is a sample function of a Gaussian random process whose statistics are approximately constant during the length of a signal pulse. The parameters of the filter are optimized to maximize the output signal-to-noise ratio (SNR). The resulting nonlinear filter has the interesting property of approximating the performance of an adaptive filter in that it weights each frequency band of each input pulse by a factor that depends on the instantaneous noise power spectrum present at that time. The SNR at the output of the nonlinear filter is compared to that at the output of a matched filter. The relative performance of the nonlinear system is good when the signal pulses have large time-bandwidth products and the instantaneous noise power spectrum is colored in the signal pass band.     

The Effect of Integrator Pole Position on the Performance of an Adaptive Array

The LMS adaptive array requires an integrator in each weight feedback control loop. In practice the integrator is often replaced by a low-pass filter, i.e., by a filter with a single pole at s = - ? (where s is complex frequency). The effect of this pole position on array performance is examined. It is shown that to obtain optimal performance from the array, ? must be less than k?2, where k is the loop gain and ?2 is the thermal noise power per element. When at exceeds k?2, the output signal-to-inter ference-plus-noise ratio from the array is degraded for intermediate values of interference power.     

Error Analysis of the Optimal Antenna Array Processors

The optimal weights of an antenna array processor, which maximizes the output signal-to-noise ratio (SNR) in the absence of errors, are computed using the noise-alone matrix inverse (NAMI) and the steering vector in the look direction or the signal-plus-noise matrix inverse (SPNMI) and the steering vector. In practice the estimated steering vector as well as the estimated optimal weights are corrupted by random errors. This paper has analyzed the effects of these errors on the performance of the NAMI processor and the SPNMI processor by deriving analytic expressions for the output signal power, output noise power, output SNR, and the array gain as a function of the error variance. The treatment is for a general array configuration and no assumption about a particular array geometry is made.     

Radiometric detection of spread-spectrum signals in noise ofuncertain power

The standard analysis of the radiometric detectability of a spread-spectrum signal assumes a background of stationary, white Gaussian noise whose power spectral density can be measured very accurately. This assumption yields a fairly high probability of interception, even for signals of short duration. By explicitly considering the effect of uncertain knowledge of the noise power density, it is demonstrated that detection of these signals by a wideband radiometer can be considerably more difficult in practice than is indicated by the standard result. Worst-case performance bounds are provided as a function of input signal-to-noise ratio (SNR), time-bandwidth (TW) product and peak-to-peak noise uncertainty. The results are illustrated graphically for a number of situations of interest. It is also shown that asymptotically, as the TW product becomes large, the SNR required for detection becomes a function of noise uncertainty only and is independent of the detection parameters and the observation interval     

超宽带电磁脉冲天线阵互耦效应研究

将超宽带电磁脉冲天线组阵后可提高主射方向的峰值功率及增益。但由于非线性阵元因素,必须考虑阵元间互耦效应。以恒阻抗TEM喇叭天线为阵元,通过仿真和实验研究了超宽带天线阵的互耦效应,研究表明,耦合强弱与阵元间距及频段有关,互耦增强了超宽带天线阵的低频辐射能力,使远场主射方向脉冲峰峰值有所增加。上述结论对于超宽带电磁脉冲天线阵的应用具有参考价值。