Greenhouse design integration benefits for extended spaceflight

It has been demonstrated that plants can be grown in microgravity, and almost every space programme has included experimental greenhouses to investigate technical and biological feasibility, as well as the habitability-related benefits of plant growth activities in space.Aside from nutritional and life support system applications, these benefits include sensory and spatial enhancement of the spacecraft environment, both through the plants as such and the design of their growth chambers, as well as by providing meaningful occupation through individual interaction. In view of long duration missions, plant growth facilities should not be regarded as a desirable add-on, but as an essential component of the habitat.Following a review of existing greenhouse designs and plants grown on past missions, the paper summarizes the benefits of greenhouses and outlines potential forms of architectural integration within the spacecraft interior.     

Carbon dioxide removal system for closed loop atmosphere revitalization,candidate sorbents screening and test results

Due to the difficulty and expense it costs to resupply manned-spacecraft habitats, a goal is to create a closed loop atmosphere revitalization system, in which precious commodities such as oxygen, carbon dioxide, and water are continuously recycled. Our aim is to test other sorbents for their capacity for future spacecraft missions, such as on the Orion spacecraft, or possibly lunar or Mars mission habitats to see if they would be better than the zeolite sorbents on the 4-bed molecular sieve. Some of the materials being tested are currently used for other industry applications. Studying these sorbents for their specific spacecraft application is different from that for applications on earth because in space, there are certain power, mass, and volume limitations that are not as critical on Earth. In manned-spaceflight missions, the sorbents are exposed to a much lower volume fraction of CO₂ (0.6% volume CO₂) than on Earth.LiLSX was tested for its CO₂ capacity in an atmosphere like that of the ISS. Breakthrough tests were run to establish the capacities of these materials at a partial pressure of CO₂ that is seen on the ISS. This paper discusses experimental results from benchmark materials, such as results previously obtained from tests on Grade 522, and the forementioned candidate materials for the Carbon Dioxide Removal Assembly (CDRA) system.     

深空探测重力模拟飞行器方案设想

为解决失重环境对航天员生理健康的影响,在调研国内外重力飞行器研究现状的基础上,结合重力模拟飞行器的原理及人造重力舒适度影响因素,提出了一种通过自旋产生人造重力的深空探测飞行器方案设想。最后给出了重力模拟飞行器建设的实施规划、总体方案、在轨组装流程及技术难点。深空探测重力模拟飞行器稳定运转可为空间工作生活的航天员提供与地面无异的重力环境,将为执行深空探测任务提供必要的环境保障。     

Omicron space habitat—research stage II

The design presented in this paper is in response to the revolution in private space activities, the increasing public interest in commercial flights to space and the utilization of structures such as space hotels or private orbital habitats. The baseline for the Omicron design concept is the Russian Salyut derived space station module. Salyut was the first space station to orbit the Earth. Its unique design and technical features were what made the development of space stations Salyut 1–7, MIR and the International Space Station (ISS) Zwezda service module possible. Due to its versatility and the reliable operating launch vehicle Proton, this space module series has the potential to be adapted for space hotel development. This paper proposes a conceptual design of the space habitat called Omicron, with particular focus on interior design for the microgravity environment. The Omicron concepts address the needs of space tourism with a strong emphasis on the safety and comfort of the spaceflight participants. The Omicron habitat supports three inhabitants in nominal conditions (e.g., two passengers and one astronaut). The habitat provides a flexible interior, facilities and spaces dynamically transforming in order to accommodate various types of activities, which will be performed in an organically formed interior supporting spatial orientation and movement in microgravity. The future development potential of Omicron is also considered. The baseline version is composed solely of one rigid module with an inverted cupola for observations. An alternative version offers more space using an inflatable structure. Finally, a combination of multiple Omicron modules enables the creation of a larger orbital habitat. The Omicron's subsystems support a few days visit by trained passengers. The transport to the habitat would be provided e.g., by the Soyuz TMA spacecraft carried by the Soyuz launch vehicle in the early stage of Omicron's development, before a fully reusable spacecraft would be available.     

基于SCL的航天器遥控操作平台设计与实现

为了实现对航天器的透明控制，航天器控制中心开发设计了遥控操作平台。首先提出了遥控操作平台的硬件组成及运行环境；其次结合航天器测控任务的需求，进行了软件功能设计，将遥控操作平台分为四个层次、六大功能，并详细描述了其数据流图；最后明确了遥控操作平台的内部、外部接口以及安全性措施。该遥控操作平台已成功地完成了我国同步和近地卫星早期以及长期管理阶段的测控任务，极大地提高了我国航天器测控能力和测控网资源的运行效率。     

Manifold dynamics in the Earth–Moon system via isomorphic mapping with application to spacecraft end-of-life strategies

Recently, manifold dynamics has assumed an increasing relevance for analysis and design of low-energy missions, both in the Earth–Moon system and in alternative multibody environments. With regard to lunar missions, exterior and interior transfers, based on the transit through the regions where the collinear libration points L₁ and L₂ are located, have been studied for a long time and some space missions have already taken advantage of the results of these studies. This paper is focused on the definition and use of a special isomorphic mapping for low-energy mission analysis. A convenient set of cylindrical coordinates is employed to describe the spacecraft dynamics (i.e. position and velocity), in the context of the circular restricted three-body problem, used to model the spacecraft motion in the Earth–Moon system. This isomorphic mapping of trajectories allows the identification and intuitive representation of periodic orbits and of the related invariant manifolds, which correspond to tubes that emanate from the curve associated with the periodic orbit. Heteroclinic connections, i.e. the trajectories that belong to both the stable and the unstable manifolds of two distinct periodic orbits, can be easily detected by means of this representation. This paper illustrates the use of isomorphic mapping for finding (a) periodic orbits, (b) heteroclinic connections between trajectories emanating from two Lyapunov orbits, the first at L₁, and the second at L₂, and (c) heteroclinic connections between trajectories emanating from the Lyapunov orbit at L₁ and from a particular unstable lunar orbit. Heteroclinic trajectories are asymptotic trajectories that travels at zero-propellant cost. In practical situations, a modest delta-v budget is required to perform transfers along the manifolds. This circumstance implies the possibility of performing complex missions, by combining different types of trajectory arcs belonging to the manifolds. This work studies also the possible application of manifold dynamics to defining suitable, convenient end-of-life strategies for spacecraft orbiting the Earth. Seven distinct options are identified, and lead to placing the spacecraft into the final disposal orbit, which is either (a) a lunar capture orbit, (b) a lunar impact trajectory, (c) a stable lunar periodic orbit, or (d) an outer orbit, never approaching the Earth or the Moon. Two remarkable properties that relate the velocity variations with the spacecraft energy are employed for the purpose of identifying the optimal locations, magnitudes, and directions of the velocity impulses needed to perform the seven transfer trajectories. The overall performance of each end-of-life strategy is evaluated in terms of time of flight and propellant budget.     

Feasibility study of astronaut standardized career dose limits in LEO and the outlook for BLEO

Cosmic Study Group SG 3.19/1.10 was established in February 2013 under the aegis of the International Academy of Astronautics to consider and compare the dose limits adopted by various space agencies for astronauts in Low Earth Orbit. A preliminary definition of the limits that might later be adopted by crews exploring Beyond Low Earth Orbit was, in addition, to be made. The present paper presents preliminary results of the study reported at a Symposium held in Turin by the Academy in July 2013. First, an account is provided of exposure limits assigned by various partner space agencies to those of their astronauts that work aboard the International Space Station. Then, gaps in the scientific and technical information required to safely implement human missions beyond the shielding provided by the geomagnetic field (to the Moon, Mars and beyond) are identified. Among many recommendations for actions to mitigate the health risks potentially posed to personnel Beyond Low Earth Orbit is the development of a preliminary concept for a Human Space Awareness System to: provide for crewed missions the means of prompt onboard detection of the ambient arrival of hazardous particles; develop a strategy for the implementation of onboard responses to hazardous radiation levels; support modeling/model validation that would enable reliable predictions to be made of the arrival of hazardous radiation at a distant spacecraft; provide for the timely transmission of particle alerts to a distant crewed vehicle at an emergency frequency using suitably located support spacecraft. Implementation of the various recommendations of the study can be realized based on a two pronged strategy whereby Space Agencies/Space Companies/Private Entrepreneurial Organizations etc. address the mastering of required key technologies (e.g. fast transportation; customized spacecraft design) while the International Academy of Astronautics, in a role of handling global international co-operation, organizes complementary studies aimed at harnessing the strengths and facilities of emerging nations in investigating/solving related problems (e.g. advanced space radiation modeling/model validation; predicting the arrivals of Solar Energetic Particles and shocks at a distant spacecraft). Ongoing progress in pursuing these complementary parallel programs could be jointly reviewed bi-annually by the Space Agencies and the International Academy of Astronautics so as to maintain momentum and direction in globally progressing towards feasible human exploration of interplanetary space.     

Emergency and rescue considerations for manned space missions.

Man in space is totally dependent upon spacecraft systems. particularly those providing Environmental Control and Life Support (ECLS). It is therefore required that the design of manned spacecraft systems include provision for backup emergency and rescue modes of operation to insure adequate crew safety margin. This paper discusses safety, emergency and rescue provisions included in the Space Transportation System (STS), with emphasis on ECLS subsystems. Similar discussion is included for systems projected for use in future, extended duration manned space missions.     

Venus Express: Scientific goals, instrumentation, and scenario of the mission

The first European mission to Venus (Venus Express) is described. It is based on a repeated use of the Mars Express design with minor modifications dictated in the main by more severe thermal environment at Venus. The main scientific task of the mission is global exploration of the Venusian atmosphere, circumplanetary plasma, and the planet surface from an orbiting spacecraft. The Venus Express payload includes seven instruments, five of which are inherited from the missions Mars Express and Rosetta. Two instruments were specially designed for Venus Express. The advantages of Venus Express in comparison with previous missions are in using advanced instrumentation and methods of remote sounding, as well as a spacecraft with a broad spectrum of capabilities of orbital observations.     

Ka-band high-rate telemetry system upgrade for the NASA deep space network

The NASA Deep Space Network (DSN) has a new requirement to support high-data-rate Category A (Cat A) missions (within 2 million kilometers of the Earth) with simultaneous S-band uplink, S-band downlink and Ka-band downlink. The S-band links are required for traditional telemetry, tracking & command (TT&C) support to the spacecraft, while the Ka-band link is intended for high-data-rate science returns. The new Ka-band system combines the use of proven DSN cryogenic designs, for low system temperature, and high-data-rate capability using commercial telemetry receivers. The initial Cat A support is required for the James Webb Space Telescope (JWST) in 2014 and possibly other missions. The upgrade has been implemented into 3 different 34-meter Beam Waveguide (BWG) antennas in the DSN, one at each of the complexes in Canberra (Australia), Goldstone (California) and Madrid (Spain). System test data are presented to show that the requirements were met and the DSN is ready for Cat A Ka-band operational support.     

Short profile for the human spacecraft Soyuz-TMA rendezvous mission to the ISS

Reduction of flight duration after insertion till docking to the ISS is considered. In the beginning of the human flight era both the USSR and the USA used short mission profiles due to limited life support resources. A rendezvous during these missions was usually achieved in 1–5 revolutions. The short-term rendezvous were made possible by the coordinated launch profiles of both rendezvousing spacecraft, which provided specific relative position of the spacecraft or phase angle conditions. After the beginning of regular flights to the orbital stations these requirements became difficult to fulfill. That is why it was decided to transfer to 1- or 2-day rendezvous profile. The long stay of a crew in a limited habitation volume of the Soyuz-TMA spacecraft before docking to the ISS is one of the most strained parts of the flight and naturally cosmonauts wish to dock to the ISS as soon as possible. As a result of previous studies the short four-burn rendezvous mission profile with docking in a few orbits was developed. It is shown that the current capabilities of the Soyuz-FG launch vehicle and the Soyuz-TMA spacecraft are sufficient to provide for that. The first test of the short rendezvous mission during Progress cargo vehicle flight to the ISS is planned for 2012. Possible contingencies pertinent to this profile are described. In particular, in the majority of the emergency cases there is a possibility of an urgent transfer to the present 2-day rendezvous profile. Thus, the short mission will be very flexible and will not influence the ISS mission plan. Fuel consumption for the nominal and emergency cases is defined by statistical simulation of the rendezvous mission. The qualitative analysis of the short-term and current 2-day rendezvous missions is performed.     

Cassini Saturn-escape trajectories to Jupiter,Uranus, and Neptune

Potential encore-mission scenarios have been considered for the Cassini mission. In this paper we discuss one of the end-of-life scenarios in which the Cassini spacecraft could perform a Saturn escape via gravity assists from Titan. It is shown that such satellite-aided escape requires a small deterministic maneuver (e.g., Δv<50 m/s), but provides enough energy for the Cassini spacecraft to reach a range of targets in our Solar System, as close to the Sun as the asteroid belt or as far as the Kuiper belt. The escape sequence could be initiated from an arbitrary point during the on-going Cassini mission. Example tours are presented in which the final Titan flyby places the spacecraft into ballistic trajectories that reach Jupiter, Uranus, and Neptune. After years of heliocentric flight, the spacecraft could impact on the target gas giant or perform a flyby to escape from the Solar System (if not to another destination). The concept can be generalized to a new kind of missions, including nested-grand tours, which may involve satellite-aided captures and escapes at more than one planet.     

Concept study on Deep Space Orbit Transfer Vehicle

In this paper, the concept of Orbit Transfer Vehicle for Deep Space Exploration (Deep Space OTV) is proposed, and its effectiveness and feasibility are discussed. Basic concept is the separation of two functions required for the deep space exploration, the transportation to the destination, and the exploration at the destination. Deep Space OTV is a spacecraft specialized for the transportation to the deep space destination. It is an expendable spacecraft propelled by solar electric propulsion. The payload of Deep Space OTV is Explorer, which is a spacecraft specialized for the exploration at the deep space destination. The effectiveness of the concept is discussed qualitatively, focused on the merits of the separations of two functions. The feasibility of Deep Space OTV is discussed based on the conceptual design of the spacecraft and its applicability to deep space missions. Several deep space missions are modeled and the payload capacity of Deep Space OTV is estimated. The missions include Asteroid rendezvous, Mars orbiter, Lunar lander, and so on.     

All-propulsion design of the drag-free and attitude control of the European satellite GOCE

This paper concerns the drag-free and attitude control (DFAC) of the European Gravity field and steady-state Ocean Circulation Explorer satellite (GOCE), during the science phase. GOCE aims to determine the Earth's gravity field with high accuracy and spatial resolution, through complementary space techniques such as gravity gradiometry and precise orbit determination. Both techniques rely on accurate attitude and drag-free control, especially in the gradiometer measurement bandwidth (5–100 mHz), where non-gravitational forces must be counteracted down to micronewton, and spacecraft attitude must track the local orbital reference frame with micro-radian accuracy. DFAC aims to enable the gravity gradiometer to operate so as to determine the Earth's gravity field especially in the so-called measurement bandwidth (5–100 mHz), making use of ion and micro-thruster actuators. The DFAC unit has been designed entirely on a simplified discrete-time model (Embedded Model) derived from the fine dynamics of the spacecraft and its environment; the relevant control algorithms are implemented and tuned around the Embedded Model, which is the core of the control unit. The DFAC has been tested against uncertainties in spacecraft and environment and its code has been the preliminary model for final code development. The DFAC assumes an all-propulsion command authority, partly abandoned by the actual GOCE control system because of electric micro-propulsion not being fully developed. Since all-propulsion authority is expected to be imperative for future scientific and observation missions, design and simulated results are believed to be of interest to the space community.     

Concept study on Deep Space Orbit Transfer Vehicle

In this paper, the concept of Orbit Transfer Vehicle for Deep Space Exploration (Deep Space OTV) is proposed, and its effectiveness and feasibility are discussed. Basic concept is the separation of two functions required for the deep space exploration, the transportation to the destination, and the exploration at the destination. Deep Space OTV is a spacecraft specialized for the transportation to the deep space destination. It is an expendable spacecraft propelled by solar electric propulsion. The payload of Deep Space OTV is Explorer, which is a spacecraft specialized for the exploration at the deep space destination. The effectiveness of the concept is discussed qualitatively, focused on the merits of the separations of two functions. The feasibility of Deep Space OTV is discussed based on the conceptual design of the spacecraft and its applicability to deep space missions. Several deep space missions are modeled and the payload capacity of Deep Space OTV is estimated. The missions include Asteroid rendezvous, Mars orbiter, Lunar lander, and so on.     

行星际空间环境对探测器可靠性影响分析

空间环境是影响航天器可靠性的重要因素。与地球轨道航天器相比,行星际探测任务可能会遭受更加恶劣的空间环境,例如极端温度环境,辐射环境,腐蚀性大气环境、宇宙尘等,再加上行星际任务寿命长,采用先进的器件和材料,空间环境对行星际探测器的可靠性构成严重的威胁,直接关系到探测目标能否实现。因此考虑空间环境对行星际探测器的影响,开展相关的预先研究无论是对于制定行星际空间探测计划,还是搭载仪器的设计都具有非常重要的意义。文章分析了极端温度、辐射环境和行星表面综合环境对探测器的影响,并对开展相关研究提出了建议。     

Mars Express spacecraft: design and development solutions for affordable planetary missions

The spacecraft designed to support the ESA Mars Express mission and its science payloads is customized around an existing avionics well suited to environmental and operational constraints of deep-space interplanetary missions. The reuse of the avionics initially developed for the Rosetta cometary program thanks to an adequate ESA cornerstone program budget paves the way for affordable planetary missions.The costs and schedule benefits inherited from reuse of up-to-date avionics solutions validated in the frame of other programs allows to focus design and development efforts of a new mission over the specific areas which requires customization, such as spacecraft configuration and payload resources. This design approach, combined with the implementation of innovative development and management solutions have enabled to provide the Mars Express mission with an highly capable spacecraft for a remarkably low cost. The different spacecraft subsystems are all based on adequate design solutions. The development plan ensures an exhaustive spacecraft verification in order to perform the mission at minimum risk. New management schemes contribute to maintain the mission within its limited funding.Experience and heritage gained on this program will allow industry to propose to Scientists and Agencies high performance, low-cost solutions for the ambitious Mars Exploration Program of the forthcoming decade.     

面向木星卫星交会任务的探测器飞行路径规划

针对探测器在木星系统内多次借力的飞行路径和轨道优化设计问题,提出了一种基于三层优化思想的飞行路径规划方法,该方法可根据给定的任务约束和交会目标,自动搜索探测器在木星系统内的借力飞行序列,同时完成标称飞行轨道的优化设计。首先,文章在给定轨道动力学模型和木卫借力模型基础上,建立了面向木卫交会任务的两次借力飞行轨道优化设计模型和求解方法;然后,采用结合遗传算法、全局遍历和贪婪算法的三层优化设计思路,给出了一种环木飞行路径规划方法;最后,以木星四颗卫星的交会任务为例进行了仿真分析。仿真结果表明：针对木卫的交会任务,探测器速度增量需求随木卫借力次数的增多,呈现先显著减小后逐渐增大的现象;探测器采用多次木卫借力的策略,可显著降低探测器的速度增量需求;探测器速度增量达到最优之后,借力目标收敛于交会目标,且速度增量随借力次数的进一步增多而逐渐增大。     

Tides and the evolution of planetary habitability

Tides raised on a planet by the gravity of its host star can reduce the planet's orbital semi-major axis and eccentricity. This effect is only relevant for planets orbiting very close to their host stars. The habitable zones of low-mass stars are also close in, and tides can alter the orbits of planets in these locations. We calculate the tidal evolution of hypothetical terrestrial planets around low-mass stars and show that tides can evolve planets past the inner edge of the habitable zone, sometimes in less than 1 billion years. This migration requires large eccentricities (>0.5) and low-mass stars ( less or similar to 0.35 M(circle)). Such migration may have important implications for the evolution of the atmosphere, internal heating, and the Gaia hypothesis. Similarly, a planet that is detected interior to the habitable zone could have been habitable in the past. We consider the past habitability of the recently discovered, approximately 5 M(circle) planet, Gliese 581 c. We find that it could have been habitable for reasonable choices of orbital and physical properties as recently as 2 Gyr ago. However, when constraints derived from the additional companions are included, most parameter choices that indicate past habitability require the two inner planets of the system to have crossed their mutual 3:1 mean motion resonance. As this crossing would likely have resulted in resonance capture, which is not observed, we conclude that Gl 581 c was probably never habitable.