DMFC内部气液两相流动与电性能的短时落塔实验研究

利用国家微重力实验室落塔提供的短时微重力实验环境,对常重力和微重力条件下直接甲醇燃料电池(DMFC)内部的气液两相流动形态和相应电性能等的影响进行了实验研究,发现在微重力条件下,DMFC阳极流道内CO₂气泡速度很小,气泡尺寸随着时间的推移而不断长大,甚至堵塞流道;流道堵塞现象随电流增大而急剧强化.电性能曲线显示,在浓差极化区存在显著的重力效应,电性能的恶化随浓差极化程度的加强而增大.      

寻找引力幽灵（上）

从动力学角度来解释天体运动的思想萌发于17世纪。引力理论最重要的发展就是把天上的引力与地面的重力联系起来,从而把引力推到无处不存在的“万有”的地步。首先觉察到引力和重力本质相同的人是英国物理学家胡克,他指出引力随与吸引中心距离的不同而变化。1680年初,胡克在给牛顿的信中提出了引力反比于距离平方的猜想。1679年,英国天文学家哈雷和伦恩根据开普勒第三定律,利用圆形轨道和匀速圆周运动的向心力公式,导出了作用于行星的引力与它们到太阳的距离的平方成反比,但是,他们还不能证明行星在椭圆轨道中也是如此。直到1687年,牛顿发表…     

地面模拟静止微重力环境中导线先期着火特性研究

针对在微重力环境中运行的载人航天飞行器上的电缆和导线在工作时由于电流过载导致温度升高而引起着火的情况,提出了"功能模拟"实验原理,并且利用地面实验设备对微重力环境下导线的着火前期特性进行了功能模拟实验研究.通过实验,得到了在微重力情况下由于浮升力的减小使自然对流减弱导致电流过载时导线的热平衡温度高于地面正常重力情况,从而证明了这正是引起航天飞行器着火的潜在点火源.      

微重力环境下的表面张力及无接触测量

表面张力是材料重要的物理化学参数之一, 尤其在微重力条件下, 由表面张力引起的科学现象一直备受关注. 静滴法是地面重力条件下进行熔体表面张力测量的主要方法, 该方法的测量结果精确, 但在微重力环境下该法应用尚存在一些问题. 本文基于对表面张力理论的思考, 阐述了对其测量方法的认识和见解, 并讨论了地面上采用静滴法对熔体的表面张力进行测量研究以及静滴法在微重力条件下应用的困难. 进而介绍了利用悬浮技术进行熔体表面张力测量的无接触测量方法, 特别介绍了电磁悬浮法, 该法避免了由于容器接触带入杂质所引起的误差, 尤其在微重力条件下消除了重力的影响, 测量精度得到显著提高.      

A1CuMgZn单晶合金的空间凝固

重力对合金凝固过程与缺陷形成具有重要影响.在常规地面条件下难以清晰揭示凝固过程中的重力效应及其作用规律,而在微重力环境中重力对熔体的作用以及对凝固过程的影响大大降低.利用天宫二号空间实验并结合地面对比实验,研究AlCuMgZn单晶合金在微重力和重力环境下枝晶生长形貌和特征参数差异以及成分偏析和缺陷形成的异同,揭示重力对枝晶生长过程和成分偏析等现象的影响及其在凝固缺陷形成中的作用.     

基于GLONASS星历的预报轨道的误差分析

推导了协议地球坐标系下的卫星运动方程.通过分析由GLONASS(Global Navigation Satellite System)广播星历参数确定的卫星预报轨道的拟合精度,指出了摄动力模型的简化、积分器的选择,以及忽略了极移影响等因素是引起拟合误差的主要因素,其中摄动力模型的简化起最主要的作用.通过对卫星轨道运动方程积分30?min,可知由摄动力模型的简化、积分器和忽略极移影响等因素引起的拟合误差分别为0.827?m,0.224?m和0.025?m.要提高预报轨道拟合的精度,关键是要对摄动力简化特别是地球引力摄动高阶项的截断以及日月引力场简化造成的轨道预报精度损失加以控制.     

一种提高卫星相对轨道运动全物理仿真逼真度的新方法

现有的卫星控制系统全物理仿真很少对卫星绕地球的轨道运动进行模拟,即使在卫星间相对轨道运动的全物理仿真中也没有考虑地心引力差和惯性力项的存在,因此其逼真度受到了影响.提出一种在共面圆轨道近距离卫星相对运动全物理仿真中引入地心引力差和惯性力项的方法,提高了物理仿真实验的逼真度.     

卫星编队飞行相对轨道动力学模型的比较及选用

基于动力学方法推导了几种编队飞行相对轨道动力学模型．分析比较了引力项线性化以及J2摄动引起的模型误差的数量级,给出了模型选取的参考准则以及适用条件,分析了不同模型的适用性．最后选取太阳同步轨道和静止轨道作为数值算例,选取合适的相对轨道动力学模型,验证模型选取准则的有效性．仿真结果表明一定范围内考虑^摄动能提高精度,而超出一定范围J2的引入只会增加复杂性,因此提出的模型选取准则对相对轨道动力学模型的选取有一定的参考价值．     

微重力燃烧实验火焰结构显示和全场温度测量的原理样机

用于空间燃烧实验的设备要求轻重量、小尺寸和多功能. 将纹影法、彩虹纹影偏折法与差分干涉法相结合, 研制了可用于火焰结构显示和全场温度测量的原理样机. 该原理样机具有重量轻、尺寸小、模块化和多功能等特点. 通过微重力落塔实验, 检验了利用纹影法测量火焰结构的功能, 同时在常重力条件下检验了利用彩虹纹影偏折法和差分干涉法测量火焰全场温度的功能. 结果表明, 火焰结构分辨率不低于1mm, 火焰温度测量结果精确, 相对误差小于2%. 该原理样机将提升空间燃烧的观察方法, 有助于未来空间燃烧实验的开展.      

重力对单气泡生长特性的影响

采用VOF (Volume of Fluid)多相流模型, 通过用户自定义函数UDF (User Defined Function)实现相变过程中质量和能量的输运, 对微重力条件下尺寸为10mm × 10mm × 25mm的矩形通道的池沸腾现象进行数值模拟, 得到了微重力及常重力作用下单个气泡生长特性的差异. 模拟结果表明, 微重力条件下气泡周围的流线与温度场的分布有显著差异; 由于表面张力作用, 微重力下的气泡脱离特性与常重力下不同; 在微重力条件下, 气泡直径的变化比较复杂, 并与重力加速度的大小有关; Marangoni流对微重力下的流动影响很大, 使换热系数波动, 而且波动的幅度随重力加速度的减小而增大.      

基于脉冲星和紫外敏感器的自主定轨定姿授时研究

为提高深空探测器的自主导航能力, 利用脉冲星导航的脉冲到达时间和脉冲星 角位置测量值、紫外敏感器中心天体质心相对于探测器的方向矢量和距离测量 值以及紫外敏感器输出的航天器姿态角, 以探测器在惯性坐标系下的位置和速度、 探测器本体坐标系相对于惯性坐标系的姿态角、星载时钟钟差为系统状态变量, 通过联邦扩展卡尔曼滤波器估计组合导航系统的系统状态, 并利用火星环绕段 轨道数据进行仿真实验. 仿真结果表明, 该组合导航方法能够使火星轨道器 在环绕段飞行中同时进行定轨、定姿和授时, 且具有较高的导航精度和授时能力.      

AIUB-CHAMP02S: The influence of GNSS model changes on gravity field recovery using spaceborne GPS

The gravity field model AIUB-CHAMP02S, which is based on six years of CHAMP GPS data, is presented here. The gravity field parameters were derived using a two step procedure: In a first step a kinematic trajectory of a low Earth orbiting (LEO) satellite is computed using the GPS data from the on-board receiver. In this step the orbits and clock corrections of the GPS satellites as well as the Earth rotation parameters (ERPs) are introduced as known. In the second step this kinematic orbit is represented by a gravitational force model and orbit parameters.     

Long-wavelength lunar gravity field recovery from simulated orbit and inter-satellite tracking data

As has been demonstrated recently, inter-satellite Ka-band tracking data collected by the GRAIL (Gravity Recovery And Interior Laboratory) spacecraft have the potential to improve the resolution and accuracy of the lunar gravity field by several orders of magnitude compared to previous models. By means of a series of simulation studies, here we investigate the contribution of inter-satellite ranging for the recovery of the Moon’s gravitational features; the evaluation of results is made against findings from ground-based Doppler tracking. For this purpose we make use of classical dynamic orbit determination, supported by the analysis of satellite-to-satellite tracking observations. This study sheds particularly light on the influence of the angular distance between the two satellites, solar radiation modeling and the co-estimation of the lunar Love number k₂. The quality of the obtained results is assessed by gravity field power spectra, gravity anomalies and precision orbit determination. We expect our simulation results to be supportive for the processing of real GRAIL data.     

对一种月球与火星探测多程微波测量链路定轨定位的数值模拟初步分析

轨道器精密定轨与着陆器的精确定位在深空探测任务中具有非常重要的科学意义。对一种月球与火星探测多程微波测量链路的定轨定位能力进行了初步仿真分析,推导了这种多程微波测量链路的测量模型,分析了该模型的优势。模拟仿真分析结果表明,此测量跟踪模式的数据具有提升轨道精度的潜在能力,并且同时求得着陆器的位置。定量分析表明,在考虑坐标系转换误差,重力场误差,行星历表误差以及星上转发误差的情况下,模拟1 mm/s的噪声,对于月球探测器来说,轨道器的定轨精度可达几米,着陆器的定位精度有望达到分米量级;对于火星探测器来说,轨道器的定轨精度可达到数10 m,着陆器的定位精度可达到几米。     

RadioAstron orbit determination and evaluation of its results using correlation of space-VLBI observations

A crucial part of a space mission for very-long baseline interferometery (VLBI), which is the technique capable of providing the highest resolution images in astronomy, is orbit determination of the mission’s space radio telescope(s). In order to successfully detect interference fringes that result from correlation of the signals recorded by a ground-based and a space-borne radio telescope, the propagation delays experienced in the near-Earth space by radio waves emitted by the source and the relativity effects on each telescope’s clock need to be evaluated, which requires accurate knowledge of position and velocity of the space radio telescope. In this paper we describe our approach to orbit determination (OD) of the RadioAstron spacecraft of the RadioAstron space-VLBI mission. Determining RadioAstron’s orbit is complicated due to several factors: strong solar radiation pressure, a highly eccentric orbit, and frequent orbit perturbations caused by the attitude control system. We show that in order to maintain the OD accuracy required for processing space-VLBI observations at cm-wavelengths it is required to take into account the additional data on thruster firings, reaction wheel rotation rates, and attitude of the spacecraft. We also investigate into using the unique orbit data available only for a space-VLBI spacecraft, i.e. the residual delays and delay rates that result from VLBI data processing, as a means to evaluate the achieved OD accuracy. We present the results of the first experience of OD accuracy evaluation of this kind, using more than 5000 residual values obtained as a result of space-VLBI observations performed over 7 years of the RadioAstron mission operations.     

The fundamental physics explorer: An ESA technology reference study

ESA technology reference studies are used as a process to identify key technologies and technical challenges of potential future missions not yet in the science programme. This paper reports on the study of the Fundamental Physics Explorer (FPE), a re-usable platform targeted to small missions testing fundamental laws of physics in space. The study addresses three specific areas of interest: special and general relativity tests based on atomic clocks, experiments on the Weak Equivalence Principle (WEP), and studies of Bose–Einstein condensates under microgravity conditions. Starting from preliminary science objectives and payload requirements, three reference missions in the small/medium class range are discussed, based on a re-adaptation of the LISA Pathfinder spacecraft. A 700/3600 km elliptic orbit has been selected to conduct clock tests of special and general relativity, a 700 km circular orbit to perform experiments on the Weak Equivalence Principle and to study Bose–Einstein condensates, each mission being based on a three-axis stabilised spacecraft. It was determined that adaptation of LISA Pathfinder would be required in order to meet the demands of the FPE missions. Moreover it was established that specific payload and spacecraft technology development would be required to realise such a programme.     

Enhancing the kinematic precise orbit determination of low earth orbiters using GPS receiver clock modelling

Clock error estimation has been the focus of a great deal of research because of the extensive usage of clocks in GPS positioning applications. The receiver clock error in the spacecraft orbit determination is commonly estimated on an epoch-by-epoch basis, along with the spacecraft’s position. However, due to the high correlation between the spacecraft orbit altitude and the receiver clock parameters, estimates of the radial component are degraded in the kinematic approach. Using clocks with high stability, the predictable behaviour of the receiver oscillator can be exploited to improve the positioning accuracy, especially for the radial component. This paper introduces two GPS receiver clock models to describe the deterministic and stochastic property of the receiver clock, both of which can improve the accuracy of kinematic orbit determination for spacecraft in low earth orbit. In particular, the clock parameters are estimated as time offset and frequency offset in the two-state model. The frequency drift is also estimated as an unknown parameter in the three-state model. Additionally, residual non-deterministic random errors such as frequency white noise, frequency random walk noise and frequency random run noise are modelled. Test results indicate that the positioning accuracy could be improved significantly using one day of GRACE flight data. In particular, the error of the radial component was reduced by over 40.0% in the real-time scenario.     

Insects as test systems for assessing the potential role of microgravity in biological development and evolution.

Gravity and radiation are undoubtedly the two major environmental factors altered in space. Gravity is a weak force, which creates a permanent potential field acting on the mass of biological systems and their cellular components, strongly reduced in space flights. Developmental systems, particularly at very early stages, provide the larger cellular compartments known, where the effects of alterations in the size of the gravity vector on living organisms can be more effectively tested. The insects, one of the more highly evolved classes of animals in which early development occurs in a syncytial embryo, are systems particularly well suited to test these effects and the specific developmental mechanisms affected. Furthermore, they share some basic features such as small size, short life cycles, relatively high radio-resistance, etc. and show a diversity of developmental strategies and tempos advantageous in experiments of this type in space. Drosophila melanogaster, the current biological paradigm to study development, with so much genetic and evolutionary background available, is clearly the reference organism for these studies. The current evidence on the effects of the physical parameters altered in space flights on insect development indicate a surprising correlation between effects seen on the fast developing and relatively small Drosophila embryo and the more slowly developing and large Carausius morosus system. In relation to the issue of the importance of developmental and environmental constraints in biological evolution, still the missing link in current evolutionary thinking, insects and space facilities for long-term experiments could provide useful experimental settings where to critically assess how development and evolution may be interconnected. Finally, it has to be pointed out that since there are experimental data indicating a possible synergism between microgravity and space radiation, possible effects of space radiation should be taken into account in the planning and evaluation of experiments designed to test the potential role of microgravity on biological developmental and evolution.     

载人飞船轨道舱泄压半经验动力学模型建立及分析

轨道舱泄压过程产生的扰动力是载人飞船轨道动力学模型中的主要误差源之一,泄压扰动的影响在沿迹方向上的误差可达几千米。针对轨道舱泄压过程建立了半经验动力学模型,并结合船载微重力加速度计测量数据及导航数据对三个模型参数进行求解。计算结果表明,返回制动开始点的轨道预报精度提高了一个量级,这说明模型的建立对于解决轨道舱泄压扰动的影响是合理有效的。