行星际磁场与磁尾磁通量绳形成的关系

收集了Cluster卫星在2001-2005年间观测到的磁尾磁通量绳事件,并对磁通量绳(magnetic flux rope)形成及其内部磁场结构与行星际磁场(IMF)的关系作了统计研究.考虑磁通量绳被观测到时行星际磁场的条件,在所有73个磁通量绳事件中,行星际磁场By分量占有主导地位的事件有80%,且78%的事件具有与行星际磁场By分量相同方向的核心场.行星际磁场通过在磁层顶与地球磁场相互作用改变南北等离子体片内磁场相对方向,形成有利于磁通量绳形成的磁场位形,并且行星际磁场By分量的方向对磁通量绳内部核心场的方向具有决定性影响.从统计结果来看,磁通量绳的形成并不会依赖于行星际磁场Bz分量的方向.     

磁层顶通量传输事件的经验重构

在地球磁层顶附近观测到的通量传输事件（Flux Transfer Event,FTE）一般被认为是瞬态局域磁重联的产物,是太阳风质量、动量和能量进入地球内磁层的重要通道.重构FTE的磁场结构可促进对其形成、演化过程及其与周围等离子体环境相互作用的理解.Grad-Shafranov重构法和磁通量绳拟合法等传统磁场重构方法适用于满足特定物理条件的磁场结构.基于平面线性插值原理,设计了一种不受具体物理条件限定的二维FTE磁场结构重构法.模型测试以及对THEMIS和Cluster卫星簇分别观测到的两个FTE的实际应用表明,在合适的多卫星位形条件下,该方法能快速有效重构出FTE的磁场空间分布,有助于推测FTE的磁场线位形,理解卫星测量数据的时间变化,以及分析等离子体物理量相对于FTE的磁场空间分布特征.      

基于能量色散特征计算磁层顶重联位置的方法研究

磁层顶磁场重联是太阳风向磁层输入能量的主要方式.重联如何触发一直是空间物理研究的难点,其机制仍然有待深入研究.由于卫星穿越磁层顶时,很难恰好穿越重联发生的区域,因此难以观测到重联的触发条件.本文利用THEMIS卫星观测,确立了反演磁层顶重联点的方法.当重联刚开始发生时,卫星能够观测到离子的能量色散特征,可利用其计算卫星到重联发生位置的距离.沿着磁力线模型追踪该距离即可反演出磁层顶发生重联的位置.与其他方法进行了对比分析,结果显示本文方法比其他方法具有更高的精度.      

太阳风中小尺度磁通量管边界重联的统计研究

通过对WIND卫星1995—2005年的数据,利用程序筛选及人工识别两种不同方法确定的小尺度磁通量管进行比较,发现程序筛选法中41%的小尺度磁通量管有边界重联现象,与人工识别法确定的小尺度磁通量管的统计结果接近;通过人工识别和程序筛选两种方法确定的小尺度磁通量管的边界重联特征,包括磁场剪切角、磁场强度以及重联耗散区的持续时间等,也具有相同的统计趋势.结果表明,两种方法确定的小尺度磁通量管在重联特性上没有本质区别,因此采用这两种方法得到的数据作为样本来统计小尺度磁通量管前后边界重联事件.本文共确定了71个重联事件,统计结果显示有50个(70%)重联耗散区磁场的减小超过20%,47个(66%)磁场剪切角大于90°;多数重联事件的磁场剪切角大于90°,表明小尺度磁通量管边界中主要发生的是反平行重联.将小尺度磁通量管的前后边界重联分开进行统计,结果显示其前后边界重联的特征是相似的,与磁云前后边界存在差异的性质不同,这意味着太阳风中的小尺度磁通量管并不具有磁云这种大尺度磁通量管的膨胀特征.     

磁层顶通量传输事件轴向统计分析

磁层顶通量传输事件（Flux Transfer Event,FTE）与磁重联相关,其典型特征为磁场法向分量的双极变化.在不同FTE模型里,FTE结构可能为重联的通量管、由多X线重联形成的闭合磁通量绳或者由单X线重联形成的开放磁场环,从而在磁层顶有不同的整体位形.使用一种新的轴向分析方法,对Cluster在一个向阳面磁层顶穿越季观测到的505个FTE进行统计研究.结果表明:在磁层顶中低纬度的侧翼,大多数FTE轴向均为沿磁层磁力线方向即南北方向,少数FTE轴向沿着不同于磁层磁力线方向的东西方向;在高纬磁层顶,大多数FTE轴向沿东西方向,少数FTE轴向沿着磁层磁力线方向即南北方向.这些统计特征有助于重新认识FTE的全球形态.      

2011年8月4日螺旋状日冕物质抛射爆发事件

利用多卫星多波段的综合观测数据,通过追踪光球表面等离子体速度分析计算了耀斑爆发前后磁螺度的变化,发现耀斑爆发前活动区中光球表面存在强的水平剪切运动,活动区磁螺度的注入主要由这种剪切运动所产生;使用CESE-MHD-NLFFF重建了耀斑爆发前后活动区的磁场位形,推测出耀斑过程中存在磁绳结构的抛射.基于这些分析,给出了这一螺旋状抛射结构的形成机制:爆发前暗条西侧足点的持续剪切运动驱动磁通量绳增加扭转,高度扭缠的通量绳与东侧足点附近的开放磁力线重联并与东侧足点断开,进而向外抛出并伴随解螺旋运动.另外,利用1AU处WIND卫星的观测数据在对应的行星际日冕物质抛射中找到典型磁云的观测特征.这表明除了传统上双足点均在太阳表面的磁云模型,这种单足点固定于太阳表面的磁通量绳爆发图景同样可能在行星系际空间形成磁云结构.研究结果对进一步认识磁云结构具有重要意义.      

磁云边界层中的复合重联喷流观测分析

太阳风中的磁场重联通常与行星际日冕物质抛射有关.本文分析了1995年10月18日WIND飞船观测到的一例磁云前边界层中的复合重联喷流事件.该复合排空区由相邻两个不同方向的喷流构成，这两个喷流分别经过Walén关系的证认，符合行星际磁场重联排空区等离子体喷流的特征.结果表明，在磁云前端可能存在众多重联点，从而将磁云本体的磁场剥离，形成比单一重联喷流区更复杂的三维边界层结构.磁云边界层中可能发生多点多次重联，从而不表现出单点重联的排空区特征，这可能是行星际磁场重联排空区较少在ICME前端被观测到的原因之一.      

近地磁尾准无碰撞磁重联事件

综合分析了ClusterⅡ－C1飞船在2001年9月15日飞越地球磁尾等离子体片区的热离子和磁场观测资料。结果表明，约在0340－0440UT时间期间，资料多次呈现出较强的尾向离子流（VXGSM＜0），明显的南向磁场分量（BZGSM＜0），以及明显的晨－昏向磁场分量BYGSM等特征。由此可以推断，在磁尾等离子体片中，在径向方向XGSE＞－18．6Re范围内，可能发生了多次磁重联事件，整个事件持续期约1h。磁重联事件的观测特征与准无（或半）碰撞磁重联理论的基本图像符合一致，因此这些事件应当是准无碰撞磁重联事件。     

日冕冲浪形成的磁流体动力学模拟

应用二维时变可压缩磁流体动力学模拟,数值研究了双极-单极磁场中电阻撕裂模不稳定性引起的磁场重联过程,用于模拟日冕冲浪的形成.结果表明,在包含有三区——双极场、电流片和单极场的磁静力平衡初态下,双极场和单极场中的磁力线将会直接重联,磁场演变成鞭状(whip)结构.由弯曲磁力线支撑的等离子体团向上运动到最高位置后,逐渐下落和弥散.等离子体团上升速度可达到0.10v_A(v_A为双极场中的Alfv'én速度).模拟结果证实日冕冲浪的形成可能与双极-单极场中的磁场重联密切相关.      

太阳表面水平运动驱动的磁圈与开放磁场重联的模拟研究

太阳大气的诸多观测事件(如耀斑、喷流等)均被归因于磁重联产生的能量转换. 近年来, 关于太阳风起源, 有研究提出了磁重联使闭合磁圈开放为太阳风供应物质的新模式. 在该模式中, 闭合磁圈被光球超米粒组织对流携带, 向超米粒边界运动, 与位于边界的开放磁场相碰撞进而发生磁重联. 该模式中磁重联的驱动及其效应是本文的研究目标. 磁流体力学(MHD)数值模拟是研究太阳大气磁重联物理过程的重要途径. 本文建立了一个二维MHD数值模型, 结合太阳大气温度和密度的分层分布, 在超米粒组织尺度上模拟了水平流动驱动的闭合磁圈与开放磁场的重联过程. 通过对模拟结果的定量分析, 认为磁重联确实能够将闭合磁圈的物质释放, 进而供应给新的开放磁结构并产生向上流动. 该结果为进一步模拟研究太阳风初始外流奠定了基础.      

MMS星座对磁层顶磁通量绳内离子惯性尺度结构的观测

利用MMS观测数据,对磁层顶通量绳内离子惯性尺度（d_i）的结构进行分析研究.结果发现,许多不同尺度（约1d_i至数十d_i）的通量绳内都存在具有d_i尺度的电流 j _m,其方向在磁层顶局地坐标系的-M方向,即与磁层顶查普曼-费拉罗电流同向,由电子在+M方向的运动（ v _em）携带.这些电流结构具有以下特征:磁鞘与磁层成分混合,磁场为开放形态;离子去磁化,电子与磁场冻结;N方向（即垂直于磁层顶电流片方向）的电场 E _n显著增大,幅度达到约20mV·m-1,并伴有明显的尖峰状起伏,该增强和尖峰状起伏的电场对应于霍尔电场.分析表明,电流、电子与离子运动的偏离以及霍尔电场之间遵从广义欧姆定律,三者密切关联.进一步对磁层顶磁重联的探测数据进行分析发现,在很多重联区内也存在与通量绳内相似的结构,其尺度约为d_i量级,其中霍尔电场 E _N、电流 j _M和电子速度 v _eM均与通量绳内对应物理量的方向相同且幅度相近.基于上述观测事实,采用经典FTE通量绳模型,对通量绳内电流、电子运动和霍尔电场的起源进行了初步探讨,认为其来源于磁层顶无碰撞磁重联区内的相应结构,并且后者在离子尺度通量绳的形成过程中起到重要作用.      

Cluster observations of earthward propagating plasmoid and flux ropes in the near-tail during the course of a substorm event

We analyze the magnetic structures in the near-tail at Xgsm = −17.5 Re on September 19, 2003 by Cluster. During the course of a substorm event, the earthward propagating plasmoid and flux ropes in the near-tail are observed. The earthward propagating plasmoid is associated with the bipolar Bz and By signatures. The two flux ropes are embedded within the earthward plasma flows, which might be referred to the population as ‘‘BBF-type’’ flux ropes. The first flux rope diameter is about 0.7 Re and duration based upon the Bz signature is ∼20 s, while the second one diameter is about 1.4 Re and duration is ∼30 s. The earthward propagating plasmoid and flux ropes could have influence upon the dipolarization and injection in inner magnetosphere. The Cluster observations of earthward propagating plasmoid and flux ropes can be interpreted as strong evidence for multiple X-lines. Our observations are consistent with that multiple plasmoids or flux ropes are formed repeatedly and ejected tailward in the course of geomagnetically active time.     

Understanding magnetotail current sheet meso-scale structures using MHD simulations

Recent Cluster observations have strongly supported the existence of meso-scale structure in the magnetotail current sheet. In our study, a magnetohydrodynamic simulation event study exhibited current sheet behavior comparable to that seen in the Cluster observations. Geotail and DoubleStar observations also show that the simulation is providing a realistic representation of the magnetosphere during the period of interest; that is, when the current sheet evidently becomes bifurcated. The magnetohydrodynamic simulation allows us to place the local observations into a global contest. It shows that the observations can be explained in terms of localized reconnection tailward of the Cluster location and the formation of a flux rope nearby. The simulation also features wave-like structure across the current sheet.     

Multi-scale reconnections in a complex CME

A series of three flares of GOES class M, M and C, and a CME were observed on 20 January 2004 occurring in close succession in NOAA 10540. Types II, III, and N radio bursts were associated. We use the combined observations from TRACE, EIT, Hα images from Kwasan Observatory, MDI magnetograms, GOES, and radio observations from Culgoora and Wind/ WAVES to understand the complex development of this event. We reach three main conclusions. First, we link the first two impulsive flares to tether-cutting reconnections and the launch of the CME. This complex observation shows that impulsive quadrupolar flares can be eruptive. Second, we relate the last of the flares, an LDE, to the relaxation phase following forced reconnections between the erupting flux rope and neighbouring magnetic field lines, when reconnection reverses and restores some of the pre-eruption magnetic connectivities. Finally, we show that reconnection with the magnetic structure of a previous CME launched about 8 h earlier injects electrons into open field lines having a local dip and apex (located at about six solar radii height). This is observed as an N-burst at decametre radio wavelengths. The dipped shape of these field lines is due to large-scale magnetic reconnection between expanding magnetic loops and open field lines of a neighbouring streamer. This particular situation explains why this is the first N-burst ever observed at long radio wavelengths.     

Generation mechanism of the whistler-mode waves in the plasma sheet prior to magnetic reconnection

The whistler-mode waves and electron temperature anisotropy play a key role prior to and during magnetic reconnection. On August 21, 2002, the Cluster spacecrafts encountered a quasi-collisionless magnetic reconnection event when they crossed the plasma sheet. Prior to the southward turning of magnetospheric magnetic field and high speed ion flow, the whistler-mode waves and positive electron temperature anisotropy are simultaneously observed. Theoretic analysis shows that the electrons with positive temperature anisotropy can excite the whistler-mode waves via cyclotron resonances. Using the data of particles and magnetic field, we estimated the whistler-mode wave growth rate and the ratio of whistler-mode growth rate to wave frequency. They are 0.0016f_ce (Electron cyclotron frequency) and 0.0086f_ce, respectively. Therefore the whistler-mode waves can grow quickly in the current sheet. The combined observations of energetic electron beams and waves show that after the southward turning of magnetic field, energetic electrons in the reconnection process are accelerated by the whistler-mode waves.     

Orientations of LASCO Halo CMEs and their connection to the flux rope structure of interplanetary CMEs

Coronal mass ejections (CMEs) observed near the Sun via LASCO coronographic imaging are the most important solar drivers of geomagnetic storms. ICMEs, their interplanetary, near-Earth counterparts, can be detected in situ, for example, by the Wind and ACE spacecraft. An ICME usually exhibits a complex structure that very often includes a magnetic cloud (MC). They can be commonly modelled as magnetic flux ropes and there is observational evidence to expect that the orientation of a halo CME elongation corresponds to the orientation of the flux rope. In this study, we compare orientations of elongated CME halos and the corresponding MCs, measured by Wind and ACE spacecraft. We characterize the MC structures by using the Grad–Shafranov reconstruction technique and three MC fitting methods to obtain their axis directions. The CME tilt angles and MC fitted axis angles were compared without taking into account handedness of the underlying flux rope field and the polarity of its axial field. We report that for about 64% of CME–MC events, we found a good correspondence between the orientation angles implying that for the majority of interplanetary ejecta their orientations do not change significantly (less than 45 deg rotation) while travelling from the Sun to the near-Earth environment.     

Two energy release processes for CMEs: MHD catastrophe and magnetic reconnection

It remains an open question how magnetic energy is rapidly released in the solar corona so as to create solar explosions such as solar flares and coronal mass ejections (CMEs). Recent studies have confirmed that a system consisting of a flux rope embedded in a background field exhibits a catastrophic behavior, and the energy threshold at the catastrophic point may exceed the associated open field energy. The accumulated free energy in the corona is abruptly released when the catastrophe takes place, and it probably serves as the main means of energy release for CMEs at least in the initial phase. Such a release proceeds via an ideal MHD process in contrast with nonideal ones such as magnetic reconnection. The catastrophe results in a sudden formation of electric current sheets, which naturally provide proper sites for fast magnetic reconnection. The reconnection may be identified with a solar flare associated with the CME on one hand, and produces a further acceleration of the CME on the other. On this basis, several preliminary suggestions are made for future observational investigations, especially with the proposed Kuafa satellites, on the roles of the MHD catastrophe and magnetic reconnection in the magnetic energy release associated with CMEs and flares.