共查询到20条相似文献,搜索用时 406 毫秒
1.
研究一种基于神经网络的线性控制系统的设计方法.该方法以经典的教学理论为基础,摈弃应用神经网络理论设计控制系统时常用的试凑方法.仿真和试验验证了该方法的正确性. 相似文献
2.
3.
4.
5.
设计科学,在科学学中又称为设计方法论或设计哲学。它是从人类设计技能的本质上去探讨设计活动的规律。从广义上讲如今的设计已不是过去认为的单一的工程技术设计概念。可以说各行各业的活动无不是一个设计过程,设计技能无处不在。设计活动是人类思维活动和实践活动的统一。设计的本质:1.设计与规划设计与规划在本质上是相同的。2设计与决策现代决策概念包括了从发现问题到作出抉择,直到实施求解方案时的反馈控制等一系列活动的全过程。设计和规划是决策当中的一部分。设计也是决策。3.设计与问题求解设计是问题求解。4.设计与创造性… 相似文献
6.
何瑞 《民用飞机设计与研究》2013,(4):56-59
活动翼面在大型民机上大量存在,为满足FAR§25.675条款要求,都需要设置止动器并对该止动器结构进行详细的设计。通过实例分析,对缝翼止动器FAR§25.675条款适航符合性验证思路和方法进行了说明,给出了一种满足FAR§25.675条款的缝翼止动器设计方法。通过对该条款符合性验证的实例分析,对设计止动器结构提供了有益的思路,为民用飞机止动器设计顺利通过FAR§25.675条款的符合性验证提供了借鉴。 相似文献
7.
在已有的腐蚀资料及相关研究的基础上,设计了飞机结构腐蚀维修数据库系统.该数据库系统包括飞机结构腐蚀维修设计所需要的各类知识.并收集了大量现实可用数据.建立了飞机腐蚀维修培训的数据基础。 相似文献
8.
基于Solid Works和Cosmos的模具结构三维设计及有限元分析 总被引:2,自引:0,他引:2
复杂结构注塑模具的设计和强度、刚度分析是注塑行业的重要难题。利用Solid Works三维设计软件实现了注塑模具的三维实体建模,并运用COSMOS/Works软件对注塑模具的典型部件进行了有限元分析,验证设计的零件是否符合实际工作情况是实现注塑模具现代化设计的重要途径。通过GearTrax2001Plus、Toolbox等外挂、内挂插件的使用.大大地简化了建模过程,克服了原有设计方法的不足.为解决较复杂的结构设计和理论分析问题提供了一种新的途径。 相似文献
9.
在计算机原理反应用的基础上,从微程序控制着手,阐明了控制模型的主要设计思想和工作过程;设计出了报程序控制模型. 相似文献
10.
11.
12.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
13.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
14.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
15.
16.
17.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
18.
FU Hong-jun MA Chong-qi KUANG Nai-hang LUAN Shi-lin 《中国航空学报》2007,20(2):124-128
This work was dedicated to performing surface oxidation and coating treatments on carbon fibers (CF) and investigating the changes of fiber surface properties after these treatments, including surface composition, relative volume of functional groups, and sur- face topography with X-ray photoelectron spectroscopy (XPS) and atom force microscopy (AFM) technology. The results show that, after oxidation treatments, interfacial properties between CF and non-polar polyarylacetylene (PAA) resin are remarkably modified by removing weak surface layers and increasing fiber surface roughness. Coating treatment by high char phenolic resin solution after oxida- tion makes interface of CF/PAA composites to be upgraded and the interfacial properties further bettered. 相似文献
19.
Xu Chenghai Meng Songhe Zhang Mingfu Zuo Hongbo Wang Guigen 《中国航空学报》2007,20(5):475-480
本文利用有限元法对冷心放肩微量提拉法(SAPMAC)生长大尺寸蓝宝石单晶过程中的热应力进行了模拟计算,应用临界缺陷理论解释了裂纹的萌生与扩展机理。研究表明,晶体内的热应力主要与晶体生长速率,环境温度和结晶取向有关;较大热应力多出现在结晶界面,放肩、收尾以及直径急剧变化等位置;最大热应力总是出现在籽晶与新生晶体的界面附近。裂纹将在临界缺陷位置产生,并在应力作用下沿a或m面扩展。计算结果与实验结果基本吻合,通过晶体生长系统和生长工艺的改进,对晶体的开裂问题得到了有效的抑制。 相似文献
20.
CHENG Wen-yuan CHANG Yan CUI De-gang XIE Xiang-hui 《中国航空学报》2007,20(1):55-59
To solve the topology optimization of complicated multi-objective continuous/discrete design variables in aircmit structure design, a Parallel Pareto Genetic Algorithm (PPGA) is presented based on grid platform in this paper. In the algorithm, the commercial finite element analysis (FEA) software is integrated as the calculating tool for analyzing the objective functions and the filter of Pareto solution set based on weight information is introduced to deal with the relationships among all objectives. Grid technology is utilized in PPGA to realize the distributed computations and the user interface is developed to realize the job submission and job management locally/remotely. Taking the aero-elastic tailoring of a composite wing for optimization as an example, a set of Pareto solutions are obtained for the decision-maker. The numerical results show that the aileron reversal problem can be solved by adding the limited skin weight in this system. The algorithm can be used to solve complicated topology optimization for composite structures in engineering and the computation efficiency can be improved greatly by using the grid platform that aggregates numerous idle resources. 相似文献