共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
3.
4.
旋转超声振动端面磨削CFRP表面质量研究 总被引:1,自引:0,他引:1
以多向层铺树脂基碳纤维增强复合材料为研究对象,采用超声振动磨削和普通磨削对其表面加工质量进行了端面磨削试验研究.通过正交试验和单因素试验分析了各工艺参数对工件表面质量的影响规律,并由表面粗糙度及微观形貌进一步分析了磨削机理.试验结果表明:在超声磨削过程中提高主轴转速、减小进给速度,同时采用合适的切削深度和工具粒度,有助于获得高质量的加工表面;超声振动磨削和普通磨削后,工件表面均存在纤维丝断裂、剥离和凹坑等缺陷,超声振动磨削后的加工缺陷出现的程度和概率均较低,表面加工质量较好. 相似文献
5.
碳纤维增强复合材料(特别是碳纤维增强树脂基复合材料和碳/碳复合材料)具有比强度和比模量高、耐高温、抗腐蚀等特点,被广泛应用于航空航天等领域.由于碳纤维增强复合材料硬度高、脆性大、层间剪切强度低等特点,使其在加工中容易出现毛刺、分层、撕裂等加工缺陷,并且刀具磨损快、耐用度低.针对碳纤维增强树脂基复合材料和碳/碳复合材料的加工问题,从铣削和钻削两个方面讨论了加工参数、加工刀具、切削力预测以及超声振动钻孔和螺旋铣孔等方面的技术,总结了目前提高碳纤维增强复合材料加工质量的工艺方法. 相似文献
6.
介绍一种用于碳纤维复合材料大直径不垂直相贯线孔加工方法。综合考虑了加工温度,加工质
量,排屑及加工效率等问题。结果表明,采用一种简易的加工工装保证了孔的尺寸及位置精度,使相贯线孔能
够一次性加工完成。通过对传统磨头的工艺改进解决了排屑及散热问题,并提高了复合材料的表面加工质量。
相似文献
7.
针对碳纤维增强复合材料干法加工的固有缺点,提出了一种采用水溶性冷却液加工碳纤维增强复合材料的加工工艺,并对干法和湿法加工进行了对比分析。结果表明:湿法加工不影响碳纤维增强复合材料的力学性能,且能够提高加工表面质量及效率,减少刀具磨损,是碳纤维复合材料加工较好的工艺。 相似文献
8.
9.
碳纤维复合材料的后加工工艺 总被引:3,自引:0,他引:3
碳纤维复合材料后加工时,易产生各种加工缺陷,刀具磨损快,尺寸控制困难,本文通过对碳纤维复合材料的切削,制孔,切割等后加工工艺的研究,对各种后加工工艺用的刀具材料,几何角度提出了建议,并推荐了相应的工艺参数。 相似文献
10.
原位自生TiB_2/Al复合材料具有密度小,比强度高,比模量大等特点,在航空航天领域具有广泛的应用前景。为探索原位自生TiB_2/Al复合材料的磨削加工性能,选用单晶刚玉SA砂轮、白刚玉WA砂轮和CBN砂轮在不同磨削参数下对TiB_2/Al复合材料进行磨削试验。首先研究了砂轮材质、转速、工件速度、磨削深度对工件表面粗糙度的影响规律;其次通过对工件表面形貌、磨屑形态、砂轮磨损的观测分析,探索了原位自生TiB_2/Al复合材料磨削表面成形机制;最后基于试验数据,给出了TiB_2/Al复合材料磨削工艺参数优选域。本研究可为颗粒增强金属基复合材料磨削加工提供基础理论支撑。 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:3,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
14.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
15.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
16.
17.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
18.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
19.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
20.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献