The ASTROCULTURE(TM) flight experiment series, validating technologies for growing plants in space.

A flight experiment, ASTROCULTURE(TM)-1 (ASC-1), to evaluate the operational characteristics and hardware performance of a porous tube nutrient delivery system (PTNDS) was flown on STS-50 as part of the U.S. Microgravity Laboratory-1 mission, 25 June to 9 July, 1992. This experiment is the first in a series of planned ASTROCULTURE(TM) flights to validate the performance of subsystems required to grow plants in microgravity environments. Results indicated that the PTNDS was capable of supplying water and nutrients to plants in microgravity and that its performance was similar in microgravity to that in 1g on Earth. The data demonstrated that water transfer rates through a rooting matrix are a function of pore size of the tubes, the degree of negative pressure on the 'supply' fluid, and the pressure differential between the 'supply' and 'recovery' fluid loops. A slightly greater transfer rate was seen in microgravity than in 1g, but differences were likely related to the presence of hydrostatic pressure effects at 1g. Thus, this system can be used to support plant growth in microgravity or in partial gravity as on a lunar or Mars base. Additional subsystems to be evaluated in the ASTROCULTURE(TM) flight series of experiments include lighting, humidity control and condensate recovery, temperature control, nutrient composition control, CO2 and O2 control, and gaseous contaminant control.     

Preliminary evaluation of soil moisture probe for use with Arcillite.

There is a need for reliable methods of measuring the level and distribution of water in the solid substrates that are used for growing plants in space. In a microgravity environment, water distribution is governed generally by capillary forces. Arcillite is the solid substrate used in the ASTROCULTURE (TM) system which was developed for growing plants in space. The goal of this study is to evaluate the applicability of heat pulse moisture sensors for measuring moisture levels in Arcillite. The ASTROCULTURE system uses suction as a means of controlling the moisture level in Arcillite, but the spatial distribution of the moisture is left unknown. Studies of the moisture content in a cell experiment were conducted to calibrate a heat pulse moisture sensor and then the sensor was used in a suction experiment to verify moisture content and distribution. Results of the studies demonstrate that head pulse moisture sensors can be used to monitor moisture content and distribution within the root module of the ASTROCULTURE system.     

Induction of hypoxic root metabolism results from physical limitations in O2 bioavailability in microgravity.

Numerous spaceflight experiments have noted changes in the roots that are consistent with hypoxia in the root zone. These observations include general ultrastructure analysis and biochemical measurements to direct measurements of stress specific enzymes. In experiments that have monitored alcohol dehydrogenase (ADH), the data shows this hypoxically responsive gene is induced and is associated with increased ADH activity in microgravity. These changes in ADH could be induced either by spaceflight hypoxia resulting from inhibition of gravity mediated O2 transport, or by a non-specific stress response due to inhibition of gravisensing. We tested these hypotheses in a series of two experiments. The objective of the first experiment was to determine if physical changes in gravity-mediated O2 transport can be directly measured, while the second series of experiments tested whether disruption of gravisensing can induce a non-specific ADH response. To directly measure O2 bioavailability as a function of gravity, we designed a sensor that mimics metabolic oxygen consumption in the rhizosphere. Because of these criteria, the sensor is sensitive to any changes in root O2 bioavailability that may occur in microgravity. In a KC-135 experiment, the sensor was implanted in a moist granular clay media and exposed to microgravity during parabolic flight. The resulting data indicated that root O2 bioavailability decreased in phase with gravity. In experiments that tested for non-specific induction of ADH, we compared the response of transgenic Arabidopsis plants (ADH promoted GUS marker gene) exposed to clinostat, control, and waterlogged conditions. The plants were grown on agar slats in a growth chamber before being exposed to the experimental treatments. The plants were stained for GUS activity localization, and subjected to biochemical tests for ADH, and GUS enzyme activity. These tests showed that the waterlogging treatment induced significant increases in GUS and ADH enzyme activities, while the control and clinostat treatments showed no response. This work demonstrates: (1) the inhibition of gravity-driven convective transport can reduce the O2 bioavailability to the root tip, and (2) the perturbation of gravisensing by clinostat rotation does not induce a nonspecific stress response involving ADH. Together these experiments support the microgravity convection inhibition model for explaining changes in root metabolism during spaceflight.     

Capillary movement of liquid in granular beds in microgravity.

A more complete understanding of the dynamics of capillary flow through an unsaturated porous medium would be useful for the development of an effective water and nutrient delivery system for the growth of plants in space. An experiment was conducted on the Mir Space Station that used an experimental cuvette called "Capillary Test Bed" to compare fluid migration under terrestrial laboratory conditions by positioning the cuvette such that the hydrostatic force is negated and on Mir under microgravity conditions. Differences in fluid migration in the cuvette were observed with migration being slower in microgravity compared with some ground control experiments.     

Seed-to-seed growth of Arabidopsis thaliana on the International Space Station.

The assembly of the International Space Station (ISS) as a permanent experimental outpost has provided the opportunity for quality plant research in space. To take advantage of this orbital laboratory, engineers and scientists at the Wisconsin Center for Space Automation and Robotics (WCSAR), University of Wisconsin-Madison, developed a plant growth facility capable of supporting plant growth in the microgravity environment. Utilizing this Advanced Astroculture (ADVASC) plant growth facility, an experiment was conducted with the objective to grow Arabidopsis thaliana plants from seed-to-seed on the ISS. Dry Arabidopsis seeds were anchored in the root tray of the ADVASC growth chamber. These seeds were successfully germinated from May 10 until the end of June 2001. Arabidopsis plants grew and completed a full life cycle in microgravity. This experiment demonstrated that ADVASC is capable of providing environment conditions suitable for plant growth and development in microgravity. The normal progression through the life cycle, as well as the postflight morphometric analyses, demonstrate that Arabidopsis thaliana does not require the presence of gravity for growth and development.     

Growth of pea epicotyl in low magnetic field implication for space research

A magnetic field is an inescapable environmental factor for plants on the earth. However, its impact on plant growth is not well understood. In order to survey how magnetic fields affect plant, Alaska pea seedlings were incubated under low magnetic field (LMF) and also in the normal geo-magnetic environment. Two-day-old etiolated seedlings were incubated in a magnetic shield box and in a control box. Sedimentation of amyloplasts was examined in the epicotyls of seedlings grown under these two conditions. The elongation of epicotyls was promoted by LMF. Elongation was most prominent in the middle part of the epicotyls. Cell elongation and increased osmotic pressure of cell sap were found in the epidermal cells exposed to LMF. When the gravitational environment was 1G, the epicotyls incubated under both LMF and normal geomagnetic field grew straight upward and amyloplasts sedimented similarly. However, under simulated microgravity (clinostat), epicotyl and cell elongation was promoted. Furthermore, the epicotyls bent and amyloplasts were dispersed in the cells in simulated microgravity. The dispersion of amyloplasts may relate to the posture control in epicotyl growth under simulated microgravity generated by 3D clinorotation, since it was not observed under LMF in 1G. Since enhanced elongation of cells was commonly seen both at LMF and in simulated microgravity, all elongation on the 3D-clinostat could result from pseudo-low magnetic field, as a by-product of clinorotation. (i.e., clinostat results could be based on randomization of magnetic field together with randomization of gravity vector.) Our results point to the possible use of space for studies in magnetic biology. With space experiments, the effects of dominant environmental factors, such as gravity on plants, could be neutralized or controlled for to reveal magnetic effects more clearly.     

微重力环境下的表面张力及无接触测量

表面张力是材料重要的物理化学参数之一, 尤其在微重力条件下, 由表面张力引起的科学现象一直备受关注. 静滴法是地面重力条件下进行熔体表面张力测量的主要方法, 该方法的测量结果精确, 但在微重力环境下该法应用尚存在一些问题. 本文基于对表面张力理论的思考, 阐述了对其测量方法的认识和见解, 并讨论了地面上采用静滴法对熔体的表面张力进行测量研究以及静滴法在微重力条件下应用的困难. 进而介绍了利用悬浮技术进行熔体表面张力测量的无接触测量方法, 特别介绍了电磁悬浮法, 该法避免了由于容器接触带入杂质所引起的误差, 尤其在微重力条件下消除了重力的影响, 测量精度得到显著提高.      

液态金属镓微重力下的融化传热特性

相变蓄热适用于周期性热流作用下航天器内部工作单元的温度控制,但是需解决微重力环境下相变材料融化速率低的问题.鉴于液态金属高导热系数和高单位体积潜热的特点,在微重力下将液态金属作为相变材料有望提高融化速率.通过对微重力下液态金属镓融化过程的相界面演化、流线和温度分布特征进行数值研究,分析了腔体尺寸和过热度对融化过程的影响.结果表明:微重力下镓的融化过程中,热传导起主导作用;镓的融化时间比冰和正十八烷分别减少了88.3%和96.4%,储热量分别为冰和正十八烷的1.2倍和2.2倍;融化时间随过热度增加而减小,随腔体半径增大而增大.此外推导出了液相分数随无量纲时间变化的关系.      

微重力对拟南芥长势影响的代谢网络流平衡分析

微重力作为典型的空间环境因素,对植物生长发育的影响机制是空间生命科学的研究热点。微重力环境直接或间接影响植物代谢,并引起许多生理适应。 随着系统生物学的发展,代谢网络模型使微重力环境下的植物代谢建模成为可能。采用流平衡分析方法对模式植物拟南芥不同组织的代谢网络进行分析,研究微重力对拟南芥生长发育的影响机制。通过比较空间与地面条件下拟南芥的生物质产量,发现空间条件下拟南芥黄化幼苗、幼苗、芽、根、下胚轴的生物量分别下降了33.00%,51.52%,6.89%,12.53%,11.70%,与空间环境下拟南芥的长势变化趋势一致。代谢通路富集分析发现,微重力使得拟南芥的碳固定等通路下调,而磷酸戊糖途径上调,初步解析了微重力对拟南芥生长发育的影响机制,也验证了流平衡方法用于微重力生物学效应研究中的可行性。      

侧向微重力环境下板式表面张力贮箱内推进剂晃动行为分析

侧向微重力是航天器在轨飞行时在东西位置保持和南北位置保持状态时所处的加速度环境.由于航天器贮箱内推进剂在侧向加速度环境下的重定位过程易产生晃动,因此侧向加速度环境对贮箱内推进剂管理装置(PMD)的管理能力的要求更高.为确保板式贮箱对推进剂的在轨管理能力,需要开展一系列的数值仿真与试验对PMD的管理能力进行验证.本文以板式表面张力贮箱为研究对象,采用VOF两相流模型对侧向微重力环境下重定位过程中贮箱内推进剂的运动进行数值模拟,并对推进剂运动中的晃动行为进行分析.最终,通过数值模拟结果验证了板式表面贮箱的管理能力,为微重力落塔试验与空间站试验提供参考依据.     

Novel sensor technology for monitoring and control of critical plant nutrient parameters.

A novel dielectric sensor technology has been developed for monitoring and control of plant nutrient delivery systems as part of NASA's Controlled Ecological Life Support System (CELSS) program. A unique measurement phenomenon was discovered in which the electrostatic field is shunted to a third terminal of the sensor, resulting in a much greater sensitivity to changes in the complex dielectric properties of the nutrient solution. Based on this phenomenon, a small, flexible, thin-film shunting dielectric sensor (SDS) was designed to provide low-frequency, non-invasive measurement of both the thickness and nutrient concentration of the layer of solution on a plant growth surface. Test results indicate a sensitivity of +/- 0.05mm in layer thickness while characterization of the ability to measure nutrient concentration continues. The development plan for this sensor is presented and other applications are discussed.     

高精度空间加速度计及其应用

高精度空间加速度计不仅可以用来测量航天器受到的非引力, 例如航天器受到地球的热辐射压力、太阳辐射压力、大气阻力等, 而且还可以作为惯性参考用来改善航天器的微重力水平, 即对航天器进行无拖曳控制. 通过对开环加速度计基本工作原理的研究, 概述了高精度空间加速度计的发展趋势和现状, 介绍了几种不同类型的高精度空间加速度计, 重点讨论了其在地球科学和空间基础物理研究中的应用.      

Characterizing parameters of Jatropha curcas cell cultures for microgravity studies

Jatropha (Jatropha curcas) is a tropical perennial species identified as a potential biofuel crop. The oil is of excellent quality and it has been successfully tested as biodiesel and in jet fuel mixes. However, studies on breeding and genetic improvement of jatropha are limited. Space offers a unique environment for experiments aiming at the assessment of mutations and differential gene expression of crops and in vitro cultures of plants are convenient for studies of genetic variation as affected by microgravity. However, before microgravity studies can be successfully performed, pre-flight experiments are necessary to characterize plant material and validate flight hardware environmental conditions. Such preliminary studies set the ground for subsequent spaceflight experiments. The objectives of this study were to compare the in vitro growth of cultures from three explant sources (cotyledon, leaf, and stem sections) of three jatropha accessions (Brazil, India, and Tanzania) outside and inside the petriGAP, a modified group activation pack (GAP) flight hardware to fit petri dishes. In vitro jatropha cell cultures were established in petri dishes containing a modified MS medium and maintained in a plant growth chamber at 25 ± 2 °C in the dark. Parameters evaluated were surface area of the explant tissue (A), fresh weight (FW), and dry weight (DW) for a period of 12 weeks. Growth was observed for cultures from all accessions at week 12, including subsequent plantlet regeneration. For all accessions differences in A, FW and DW were observed for inside vs. outside the PetriGAPs. Growth parameters were affected by accession (genotype), explant type, and environment. The type of explant influenced the type of cell growth and subsequent plantlet regeneration capacity. However, overall cell growth showed no abnormalities. The present study demonstrated that jatropha in vitro cell cultures are suitable for growth inside PetriGAPs for a period of 12 weeks. The parameters evaluated in this study provide the basic ground work and pre-flight assessment needed to justify a model for microgravity studies with jatropha in vitro cell cultures. Future studies should focus on results of experiments performed with jatropha in vitro cultures in microgravity.     

Living plant systems: How robust are they in the absence of gravity?

The following hierarchical levels can be recognised in plant systems: cells, organs, organisms and gamodemes (interbreeding members of a community). Each level in this ‘living hierarchy’ is both defined and supported by a similar set of sub-systems. Within this framework of plant organization, two complementary questions are relevant for interpreting plant-oriented space experiments: 1) What role, if any, does gravity play in enabling the development of each organizational level? and 2) Does abnormal development in an altered gravity environment indicate sub-system inefficiency? Although a few representatives of the various organizational levels in plant systems have already been the subject of microgravity experiments in space laboratories—from cells in culture to gamodemes, the latter being found in some Closed Environment Life Support Systems—it would be of interest to investigate additional systems with respect to their response to microgravity. Recognition of the sub-systems at each level might be relevant not only for a more complete understanding of plant development but also for the successful cultivation and propagation of plants during long-term space flights and the establishment of plants in extra-terrestrial environments.     

Possible use of a 3-D clinostat to analyze plant growth processes under microgravity conditions.

A three-dimensional (3-D) clinostat equipped with two rotation axes placed at right angles was constructed, and various growth processes of higher plants grown on this clinostat were compared with ground controls, with plants grown on the conventional horizontal clinostat, and with those under real microgravity in space. On the 3-D clinostat, cress roots developed a normal root cap and the statocytes showed the typical polar organization except a random distribution of statoliths. The structural features of clinostatted statocytes were fundamentally similar to those observed under real microgravity. The graviresponse of cress roots grown on the 3-D clinostat was the same as the control roots. On the 3-D clinostat, shoots and roots exhibited a spontaneous curvature as well as an altered growth direction. Such an automorphogenesis was sometimes exaggerated when plants were subjected to the horizontal rotation, whereas the curvature was suppressed on the vertical rotation. These discrepancies in curvature between the 3-D clinostat and the conventional ones appear to be brought about by the centrifugal force produced. Thus, the 3-D clinostat was proven as a useful device to simulate microgravity.     

微重力环境下蓄液器流体蓄留特性的试验研究

为验证板式贮箱蓄液器的蓄液性能,搭建了蓄液器模型试验系统,针对蓄液器模型的蓄液性能和流体传输行为进行微重力落塔试验研究,得到微重力环境下蓄液器的流体蓄留和传输规律.试验结果表明,相对于楔形蓄液器,双圆锥形蓄液器具有更好的蓄液能力,对于双圆锥形蓄液器,承受侧向加速度时仍具有良好的蓄液能力,合理设计蓄液器结构可有效地蓄留液体并控制液体传输速度.该试验成果不仅为新型板式流体管理部件设计优化提供参考,同时也为空间环境下流体控制提供了一种新方法.     

空间飞行与回转器回旋条件下青菜开花与花粉发育的研究

比较研究了SJ-8返回式卫星留轨舱微重力条件与地面三维回转模拟微重力条件下青菜生长与发育情况.研究发现空间微重力条件下青菜开花过程需要大约18 h,明显长于地面对照5 h左右.回转器模拟实验结果表明,改变重力影响了花瓣的伸展与发育及花粉的产量,回转条件下花粉细胞中的微管排列明显不同于静止对照.细胞骨架受到干扰可能是改变重力条件下花粉产量降低的原因之一.本研究首次报道了在空间飞行试验中成功地采用了显微实时图像技术观察植物的开花过程,并获得了从花蕾到开花结束各阶段清晰的图像.      

地外人工光合成装置研制与试验

原位资源利用技术是地外生命保障体系构建、实现人类地外生存的有效途径，是载人深空探索的核心技术。基于微通道技术的人工光合成反应器，采用流动反应器设计，用于低微重力等特殊环境条件下模拟人工光合作用，实现CO２向O２和含碳燃料的转化。微通道芯片通过气液剪切作用力使气体反应产物快速脱离电极表面并随反应介质排出反应器，理论上可以克服微重力条件对反应过程的影响，尚需进行微重力试验进行验证。同时，微通道结构可以通过精确控制反应气液的压力、流速、流量比等反应条件，获得优化的反应条件。通过地面试验，验证了该反应器将CO２还原为O２和含碳化合物的功能可行性。以Au和Ir/C作为阴极和阳极材料，3V电压条件下，O２产率可达11.74mL/h。此外，基于人工光合成反应器搭建了集反应模块、控制模块、流路驱动模块以及检测模块等于一体的地外人工光合成装置，形成原位反应、介质供给、精确控制、在线收集和检测等功能一体化的系统，并实现CO２有效转换和O２供给。为后续技术成熟度更高的反应装置研制、高产物选择性的含碳化合物转化以及人工光合成反应装置在轨试验奠定了理论和实践基础。     

The use of an electric field in increasing the resistance of plants to the action of unfavorable space flight factors.

The key role in increasing the resistance of plants to unfavorable space flight factors is assigned to biomembranes of root cells. It is these biomembranes in which numerous biochemical and biophysical processes determining the adaptive capacity of plant organisms occur. In the initial period of exposure to unfavorable space flight factors the adaptation reactions of the plant organism undoubtedly increase its resistance. But the intensification of removal of H+ ions through the plasmalemma with an increase of the external influence sharply raises the quantity of cations leaving the cell, which leads to the accumulation of a considerable quantity of intracellular negative charges. These charges together with negative charges built in the membrane force protons to concentrate on the external surface of the membrane. Since protons have a very strong electric field, they form such a charge of which the electric field is about from several to hundreds of V/cm. The concentration of positive charges of protons entails the formation of a double electric field which extremely impedes the diffusion of other ions. Thus, a proton barrier is formed. Its length can be very considerable due to which the whole process of transmembrane energy and mass-transfer is disturbed. The proton barrier is easily destroyed by a weak electric field created in the root zone. In experiments on electrostimulation of different plants under space flight conditions at the orbital station MIR the absorption of nutrient elements by the root system increased to the optimal level, the ratio of physiologically active substances in the rhizosphere was normalized, the content of chlorophyll, carotin, and ascorbic acid in leaves corresponded to the ground-based control. Understanding of the mechanism of formation of a proton barrier on the plasmalemma of root cells as a result of the response of plants to the negative action of external factors (microgravity) is of great importance. It allows the possibility of life support of the vegetable kingdom in extreme conditions to be estimated in a new way.     

Particulated growth media for optimal liquid and gaseous fluxes to plant roots in microgravity.

An important and yet relatively under researched area of plant growth in microgravity, deals with the rooting environment of plants. A comprehensive approach for selecting the physical characteristics of root growth media which optimizes the dynamic availability of water and dissolved nutrients, and gases to plant roots was developed and tested. Physically-based and parametric models describing the relationship between content and fluxes of liquids and gases were used to cast a multi-objective optimization problem. This methodology reveals that a medium's ability to supply liquid and gas fluxes optimally is dependent upon physiological target values, system operation limits and root module design which dictate the medium's range of soil water characteristic and particle size distribution. Optimized media parameters designate a particle size distribution from which a particulated growth media was constructed and matched to the optimized media parameters. This methodology should improve the selection of optimal media properties for plant growth in microgravity as well as other porous media applications.