共查询到20条相似文献,搜索用时 171 毫秒
1.
飞机大部件对接数字化装配技术能适应快速研制和生产及低成本制造的要求,是数字化技术在飞机设计制造过程中更深层次的应用及延伸,实现了飞机总装过程中的数字化、柔性化、信息化、模块化和自动化. 相似文献
2.
3.
4.
飞机数字化设计与制造技术最新发展 总被引:1,自引:0,他引:1
自20世纪90年代波音777全数字飞机面世以来,飞机数字化经过了几个不同的发展时期.在经过了3D定义飞机几何参数到3D数控加工和数字化装配的重点发展过程后,飞机设计与制造进入了全逻辑关系的联动数字化时代.为了进一步了解目前的状况,分析了飞机数字化设计与制造技术的最新发展和应用. 相似文献
5.
飞机结构件逐步向大型化、整体化和复杂化发展,且制造精度要求较高.对设计和制造技术提出了更高的要求.因此,开展飞机结构件设计技术和制造技术的研究,在飞机结构件设计和制造过程中应用数字化技术和智能技术,构建飞机结构件设计制造协同化平台,实现飞机结构件高效、高质、低成本和环保的柔性化设计和制造,对提高企业核心竞争力具有重要意义. 相似文献
6.
飞机数字化制造环境下的协调方法 总被引:3,自引:3,他引:0
孟飙 《沈阳航空工业学院学报》2009,26(1)
数字化制造环境下,设计产生的数模在飞机装配协调过程中的应用技术和传统的模线样板协调技术具有很大的区别.在介绍了数字化标准工装概念之后,详细阐述了基于该概念的数字化标工协调方法及其在装配协调过程中的用途和用法,总结了装配过程中的数字化协调路线.并提出当前飞机装配生产环境下混合协调技术的合理性. 相似文献
7.
基于三维模型的飞机数字化快速检测技术研究 总被引:1,自引:0,他引:1
随着飞机数字化设计与制造技术的发展,大型整体结构件用量的不断增加,以及民用飞机经济性与安全性要求的日益提高,对产品的制造精度也提出了更高要求,使产品检测难度日趋加大,从而对测量技术提出了新的需求,传统的测量技术已难以满足飞机零部件快速、高效、高精度检测要求.当前基于三维模型的数字化检测技术应用已成为打通飞机复杂零件与大尺寸零部件数字化设计、制造、检测一体化流程,提升检测效率与水平的关键环节. 相似文献
8.
大型飞机数字化制造是一个非常复杂的系统工程,主要关键技术包括数字化并行协同技术、仿真技术、数字化测量技术、智能集成技术、柔性制造技术、飞机部件便捷传送技术、数字化信息处理技术、脉动线制造技术等,通过这些关键技术保证大飞机数字化制造的每个环节高效、顺利地进行,从而保证大飞机研制和生产周期短、质量高、成本低.对关键技术进行了综述分析,指出了关键技术中技术要点和关键问题,对更好地开展大飞机数字化制造具有参考作用. 相似文献
9.
张平 《航空标准化与质量》2003,(6):16-20
介绍了沈飞公司在工装数字化设计制造领域的主要研究成果——基于CATIA的装配工装设计技术、装配工装数字化安装技术,及其在波音737-X尾段中的应用情况;指出了今后国内飞机装配工装设计及制造技术的发展趋势。 相似文献
10.
飞机制造技术迅猛发展,其数字化测量技术在飞机装配中的作用越来越重要,地位越来越凸显.采用数字化测量系统不仅可以大幅度提升现代飞机装配的质量和效率,而且更能适应上层的飞机数字化设计,打通从设计、制造到装配的数字化、一体化流程. 相似文献
11.
12.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
13.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
14.
15.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
16.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
17.
18.
19.
航天器返回地球的气动特性综述 总被引:4,自引:0,他引:4
航天器返回地球的飞行过程中,气动特性是实现将宇宙飞行速度减到落地前速度、保证再入飞行得到有效控制以及再入防热安全可靠的关键因素。针对简单旋成体气动外形、半弹道式再入控制、烧蚀防热类返回航天器,综述了返回地球过程中变化的空气流域特性、航天器周围的气体绕流环境、空气与航天器作用产生的动力学与热效应等。系统地给出了该类航天器的再入气动特性参数与飞行性能的共性规律,包括:气动阻力与再入减速、气动升力与再入轨迹控制、配平攻角与飞行稳定性、气动加热与防热,以及再入过程中不同气动特性航天器、气象条件变化等对再入飞行性能的影响规律。为航天器开展返回飞行过程的跨流域气动性能工程研制提供设计参考。 相似文献
20.
FU Hong-jun MA Chong-qi KUANG Nai-hang LUAN Shi-lin 《中国航空学报》2007,20(2):124-128
This work was dedicated to performing surface oxidation and coating treatments on carbon fibers (CF) and investigating the changes of fiber surface properties after these treatments, including surface composition, relative volume of functional groups, and sur- face topography with X-ray photoelectron spectroscopy (XPS) and atom force microscopy (AFM) technology. The results show that, after oxidation treatments, interfacial properties between CF and non-polar polyarylacetylene (PAA) resin are remarkably modified by removing weak surface layers and increasing fiber surface roughness. Coating treatment by high char phenolic resin solution after oxida- tion makes interface of CF/PAA composites to be upgraded and the interfacial properties further bettered. 相似文献