大直径D406A钢圆筒旋压试验研究

简要介绍了大直径(φ1200mm)D406A钢圆筒旋压工艺试验过程,对旋压道次的安排及工艺参数的选择进行了工艺试验,最终摸索出了较佳的工艺参数,旋压出了合格的圆筒,对其它规格型号的圆筒旋压具有参考意义。     

T250钢大直径薄壁圆筒旋压工艺试验研究

介绍了T250钢大直径薄壁圆筒旋压工艺试验过程,讨论了试验过程中圆筒堆料、鼓包等问题产生的原因及其解决措施,确定了强力旋压四道次、不进行中间固溶处理的工艺路线及各道次旋压工艺参数,能够加工出质量基本满足技术条件的旋压圆筒。     

液体火箭发动机收敛段内壁强力旋压-胀形工艺试验

介绍了某大型火箭发动机燃烧室内壁-收敛段内壁采用旋压-胀形工艺试制出无焊缝整体零件的工艺试验过程,探讨了旋压在航天发动机制造中的应用.     

筒形件模环旋压隆起和旋压力的有限元模拟分析

在分析筒形件强力模环旋压工艺变形特点的基础上,采用三维弹塑性有限元法对筒形件模环旋压进行了数值模拟,分析了旋压成形时的应力分布、旋压成形中的隆起现象及工艺参数对隆起和旋压力的影响.结果表明,在所描述的工艺条件下,采用成形角为20～25,牵引速度范围为0.4～0.6mm/s是合理的.模拟分析结果为模环旋压工艺参数的优化提供了依据.     

某助推器壳体旋压工艺研究

介绍了一种材料为合金结构钢30Cr Mn Si A的双台阶固体火箭助推器壳体强力旋压工艺方法。通过分析零件的结构特点,确定出采用正向旋压方法,设计相应的旋压毛坯和旋压工装。通过工艺试验过程检测与数据分析,确定出合理的旋压工艺流程,经过生产验证旋压工艺流程的合理性和可行性,旋出满足设计要求的产品,为同类结构壳体旋压提供技术参考。     

不锈钢薄壁管滚珠旋压模拟及缺陷分析

对不锈钢薄壁管滚珠旋压过程及其工艺缺陷进行了分析和研究,应用刚塑性有限元软件DEFORM3D,建立了不锈钢薄壁管滚珠旋压过程的三维有限元模型,分析了其变形过程中应力、应变的分布规律,并结合实验结果分析了滚珠旋压过程中出现的表面隆起、表面起皱、表面波纹等典型缺陷,提出相应预防措施,可用于指导生产实践.     

钛合金旋压技术在国内航天领域的应用及发展

综述了国内钛合金在旋压成形和理论研究领域的成果和水平,重点结合航天领域钛合金旋压需轻量精密化的特点,探讨了影响航天制件钛合金旋压成形的几个关键因素,即加热温度、旋压工艺参数、旋压工装及润滑方式等。对钛合金旋压在航天领域的技术应用及发展进行了展望,提出低成本和复杂型面零件旋压是未来发展趋势。     

有色金属旋压技术研究现状

阐述了有色金属旋压加工的研究现状。从有色金属旋压材料、工艺和质量控制三方面介绍了有色金属旋压加工的特点,对有色金属旋压的发展趋势做了预测。     

多台阶薄壁圆筒强力旋压工艺试验研究

介绍了30CrMnSiA材料多台阶薄壁圆筒采用同步反旋成形的工艺流程、试验过程和出现的问题及处理措施,摸索了旋压工艺参数对该类结构产品尺寸精度的影响规律,为同类结构产品旋压成形提供参考。     

超长薄壁带台阶筒体的旋压工艺

超长薄壁带台阶筒体在其加工上有较大难度 ,是适合用强力旋压加工完成的典型零件。通过工艺攻关 ,制作旋压工装 ,确定旋压方式、旋压方案、合理的旋压参数 ,旋压出了合格的筒体制件。该工艺方法已运用于正常的批量生产 ,制件精度良好 ,符合所有要求。     

GEOS and its US and European components: Challenges and impact

The Centre Français sur les Etats Unis (CFE) held a day-long workshop on GEOSS, GMES and IEOS on 17 January 2006. Sponsored by Arianespace, the invitation-only roundtable drew some 50 participants from European and US administration, industry and academia. The programme and the presentations are on the CFE web site: www.cfe-ifri.net. This report summarizes the proceedings.     

偶氮呋咱和氧化偶氮呋咱的合成及表征

介绍了高能材料二氨基偶氮呋咱(DAAF)、二氨基氧化偶氮呋咱(DAOAF)及二硝基氧化偶氮呋咱(DNOAF)的合成。其中,采用新型氧化剂制备DAAF,得率提高至65.60%。通过DSC-TG、元素分析、IR、1H NMR和MS等方法,对其结构进行了鉴定,并进行了常规的感度测试。感度数据表明,无氢炸药DNOAF的摩擦感度较大,与C-12相当,而DAAF和DAOAF为低感度炸药。     

汽车检测与维护专业建设的回顾与总结

汽车检测与维护专业是我校重点建设的广西区区级示范专业,经过五年的建设已经形成了一定的规模。文章主要从实验实训中心建设、课程建设、教材建设、师资队伍建设、教学改革等方面对该专业的建设历程进行了回顾和总结。     

教育教学活动中的师生人际冲突及其解决方法

受传统观念的影响,人们一般只看到师生人际冲突的负面影响,而很少注意其正面作用;实际上,师生人际冲突是教育教学的互动形式之一,它的存在是必然的,也是合理的,它既有消极有害的一面,也有积极有益的一面。文章试在分析师生人际冲突原因的基础上,针对其影响的二重性,从学校、教师、学生三个方面,提出了正确对待师生人际冲突的建设性对策。     

Atlas II and IIA analyses and environments validation

General Dynamics has now flown all four versions of the Atlas commercial launch vehicle, which cover a payload weight capability to geosynchronous transfer orbit (GTO) in the range of 5000–8000 lb. The key analyses to set design and environmental test parameters for the vehicle modifications and the ground and flight test data that validated them were prepared in paper IAF-91-170 for the first version, Atlas I.

This paper presents similar data for the next two versions, Atlas II and IIA. The Atlas II has propellant tanks lengthened by 12 ft and is boosted by MA-5A rocket engines uprated to 474,000 lb liftoff thrust. GTO payload capability is 6225 lb with the 11-ft fairing. The Atlas IIA is an Atlas II with uprated RL10A-4 engines on the lengthened Centaur II upper stage. The two 20,800 lb thrust, 449 s specific impulse engines with an optional extendible nozzle increase payload capability to GTO to 6635 lb. The paper describes design parameters and validated test results for many other improvements that have generally provided greater capability at less cost, weight and complexity and better reliability. Those described include: moving the MA-5A start system to the ground, replacing the vernier engines with a simple 50 lb thrust on-off hydrazine roll control system, addition of a POGO suppressor, replacement of Centaur jettisonable insulation panels with fixed foam, a new inertial navigation unit (INU) that combines in one package a ring-laser gyro based strapdown guidance system with two MIL-STD-1750A processors, redundant MIL-STD-1553 data bus interfaces, robust Ada-based software and a new Al-Li payload adapter. Payload environment is shown to be essentially unchanged from previous Atlas vehicles. Validation of load, stability, control and pressurization requirements for the larger vehicle is discussed.

All flights to date (five Atlas II, one Atlas IIA) have been successful in launching satellites for EUTELSAT, the U.S. Air Force and INTELSAT. Significant design parameters validated by these flights are presented. Particularly noteworthy has been the performance of the INU, which has provided average GTO insertion errors of only 10 miles apogee, 0.2 miles perigee and 0.004 degrees inclination. It is concluded that Atlas II/IIA have successfully demonstrated probably the largest number of current state-of-the-art components of any expendable launch vehicle flying today.     

SMOS与Aquarius卫星海表盐度测量方法及数据的对比分析

国际上发射的海表盐度遥感卫星主要有2颗:欧洲的SMOS和美国的Aquarius卫星,为给后续海表盐度遥感提供参考借鉴,对比分析了这2颗卫星的遥感器载荷、数据处理算法和盐度数据。遥感器载荷方面,SMOS采用L波段二维综合孔径辐射计,而Aquarius采用L波段实孔径辐射计加散射计;数据处理算法方面,分析了二者在介电常数模型、海面粗糙度校正以及反演算法方面的差异;盐度数据方面,分析了SMOS与Aquarius盐度数据之间的相关程度,并分别与ISAS(In Situ Analysis System)浮标盐度数据作对比,分析了2颗卫星的盐度数据精度。将2颗卫星的盐度遥感数据与ISAS浮标盐度数据对比发现,在全球范围内,Aquarius盐度测量精度优于SMOS;但在开阔海域,SMOS盐度测量精度优于Aquarius;而在近海岸区域,均出现较大的误差,且SMOS数据误差更大。     

凝胶推进剂及其模拟剂的制备和特性表征

高能凝胶推进剂的选择、制备、实验及特性表征是凝胶推进剂研究的关键环节.燃料凝胶化包括有机和无机两种胶凝剂.氧化剂的凝胶化使用了无机胶凝剂.此外选择和配制了凝胶推进剂的模拟剂,它具有与实际燃料和氧化剂相匹配的流变特性.制备了在流变学上相匹配的凝胶燃料和凝胶氧化剂、惰性凝胶模拟剂与凝胶推进剂,并对其流变学特性进行了分类.     

Launch and early operations of Herschel and Planck

On 14 May 2009 the European Space Agency launched 2 space observatories: Herschel (with a 3.5 m mirror it is the largest space telescope ever) will collect long-wavelength infrared radiation and will be the only space observatory to cover the spectral range from far-infrared to sub-millimetre wavelengths, and Planck will look back at the dawn of time, close to the Big Bang, and will examine the Cosmic Microwave Background (CMB) radiation to a sensitivity, angular resolution and frequency range never achieved before. This paper will present the Flight Dynamics, mission analysis challenges and flight results from the first 3 months of these missions.Both satellites were launched on the same Ariane 5 and travelled to the L2 Lagrange point of the sun–earth system 1.5 million km from the earth in the opposite direction of the sun. There they were injected to a quasi-halo orbit (Herschel) with the dimension of typically 750,000 km×450,000 km, and a Lissajous orbit (Planck) of 300,000 km×300,000 km.In order to reach these Lissajous orbits it is mandatory to perform large trajectory correction manoeuvres during the first days of the mission. Herschel had its main manoeuvres on the first day. Planck had to be navigated on the first day and by a mid-course correction manoeuvre, the L2 orbit insertion manoeuvre was planned on day 50. If these slots were missed, fuel penalties would rapidly increase.This posed a heavy load on the operations teams because both spacecrafts have to be thoroughly checked out and put into the correct modes of their attitude control systems during the first hours after launch.The sequence of events will be presented and explained and the orbit determination results as well as the manoeuvre planning will be emphasised.     

月球测绘学分类及应用展望

根据月球测绘的研究现状及发展趋势,对月球测绘学的概念进行了溯源与拓展。在分析月球测绘学与地球测绘学主要差异基础上,从传统测绘学科分类角度出发,综合考虑月球测绘学特殊性,重新梳理出月球测绘学主要学科专业分类,并详细介绍了每个学科专业的定义及国内外研究现状,给出了月球测绘学的五个主要应用领域及其应用展望。我国应尽早开展月球测绘理论与技术研究,形成完整的月球测绘学科体系,能够有力地促进我国空间科学技术的发展,保障后续探月工程的顺利实施。     

英汉词语空缺与跨文化差异及翻译策略探究

语言是文化的载体,文化上的差异导致了英汉语言中的词汇空缺现象,词汇空缺现象反映了语言的民族性。在跨文化交际中,词汇空缺会给交际带来障碍,造成语用失误,甚至导致交际失败,论文就词语的空缺现象与跨文化差异中的翻译策略进行了一些探讨。