Problems of improper dynamic system analysis and synthesis with regard for transfer zeroes

The notion of a transfer zero as applied to improper dynamic systems is considered. An algorithm that makes it possible to reduce the calculation of improper system zeroes to finding ordinary system zeroes is presented. A method for providing the specified position of a transfer zero set in the improper dynamic system having an equal number of inputs and outputs is proposed.     

基于双边截断的双参数海上风电站 SAR图像 CFAR检测

文章提出了 1种基于双边截断的双参数海上风电站 SAR图像 CFAR检测器 DTCS-TPCFAR,目的是提高在具有多个目标海上区域和石油泄漏区域等环境下对海上风电站的检测性能。DTCS-TPCFAR所提出的双边截断杂波的方法,能够同时消除高强度和低强度异常值的干扰,同时保留真实的杂波样本。通过使用最大似然估计计算双边截断后样本的均值和标准差,然后通过这 2个参数估计值计算出截断阈值,最后再结合指定的虚警率(Probability of False Alarm,PFA)来对测试单元(Test Cell,TC)进行判断,完成最终的目标检测。这也是首次将 CFAR检测器用于检测海上风电站。文章通过 Sentinel-1数据集来验证该方法的有效性。实验结果表明,文章所提出的算法在相同指定虚警率下,具有更高的检测率(Detection Rate,DR)和更低的误报率(False Alarm Rate,FAR)。     

Dwelltime Minimization for Radar Target Detection in the Clear

Consider the design of a minimum dwelltime set of coherent, range-unambiguous pulse bursts that will provide a specified target detection performance in a clutter-free ("clear") range interval [Rmin,Rmax]. Practical procedures are presented here for finding these optimal waveform sets versus Rmax/Rmin, subject to a peak transmit power constraint. It is always possible to design a multiple-PRF clear mode that achieves the same effective use of energy as a single-PRF waveform with a 33 percent duty ratio. Slightly higher effective duty ratios can be achieved if the radar is capable of transmitting and processing two interleaved pulse bursts at the same PRF.     

Pade approximations of probability density functions

The analysis of radar detection systems often requires extensive knowledge of the special functions of applied mathematics, and their computation. Yet, the moments of the detection random variable are often easily obtained. We demonstrate here how to employ a limited number of exactly specified moments to approximate the probability density and distribution functions of various random variables. The approach is to use the technique of Pade approximations (PA) which creates a pole-zero model of the moment generating function (mgf). This mgf is inverted using residues to obtain the densities     

涡扇发动机气路传感器故障诊断

为了实现对某涡扇发动机传感器故障的在线诊断,提出并设计了1种基于在线贯序极端学习机的故障诊断算法。其核心思想是在定位某传感器故障后,在线建立针对该故障传感器"预学习"的信号重构算法,解决多故障混叠问题。在线信号重构算法以泛化能力指标为判定条件,利用选择策略对算法网络权值进行选择性更新,提高了故障诊断系统的实时性。以某型涡扇发动机为对象开展了传感器故障诊断与重构仿真,结果表明:该算法能够对发动机单、双传感器故障进行准确地诊断与信号重构,且具有良好的实时性。     

Calculation of Probability of Detection with Target Scintillation

This paper presents a computational method for the calculation of probability of detection using measured radar target cross-section data. The described method can also be used for probability of detection calculations when the radar target cross section follows a specified probability density function. Using the computational procedure of the paper, a number of curves are generated which can be used for probability of detection calculations with exponential and Gaussian radar target cross-section distributions. The results obtained using theoretical distributions are compared with the corresponding results using actual target cross-section measurements. The results of computer runs are compared to the corresponding values in the literature where available.     

A Method for Setting a Test Signal Level Relative to Noise

A method is described for adjusting the leval of an RF test signal generator relative to the noise level at the receiver output. The method compares a detected output to a threshold and counts the number of times noise and signal plus noise cross the threshold in a given number of tries. By setting the threshold at a given false alarm probability for noise alone and then adding the test signal and adjusting its level to give a specified detection probability, the signal-to-noise ratio can be calibrated to an accuracy that depends on the number of samples used to measure the probabilities. The false alarm and detection probabilities are given for best accuracy as well as the rms error in signal-to-noise ratio as a function of the number of samples used.     

一种适合于大尺寸航拍图像的特征点提取方法

一些航拍图像的尺寸较大,现有的特征点提取算法在对其处理时均要耗费大量的时间,针对这一问题,提出一种快速有效的特征点提取算法。首先构造原始图像的拉普拉斯金字塔,以获得图像的尺度信息,同时保留图像的方向信息;再使用非均匀多方向滤波器组将金字塔图像分解在不同方向上,在分解后的图像中提取局部极值点作为候选特征点集;采用特定的合并策略合并候选特征点最终得到特征点集,并根据方向滤波器组为特征点分配方向向量。试验结果表明,本文算法在基本保证提取到的特征点匹配率及正确率的前提下,有较高的效率。     

一种适合于大尺寸航拍图像的特征点提取方法简

 一些航拍图像的尺寸较大,现有的特征点提取算法在对其处理时均要耗费大量的时间,针对这一问题,提出一种快速有效的特征点提取算法。首先构造原始图像的拉普拉斯金字塔,以获得图像的尺度信息,同时保留图像的方向信息;再使用非均匀多方向滤波器组将金字塔图像分解在不同方向上,在分解后的图像中提取局部极值点作为候选特征点集;采用特定的合并策略合并候选特征点最终得到特征点集,并根据方向滤波器组为特征点分配方向向量。试验结果表明,本文算法在基本保证提取到的特征点匹配率及正确率的前提下,有较高的效率。     

Constrained Least-Squares Synthesis of Coefficients for Arrays of Sensors and FIR Digital Filters

A general method is presented for synthesizing weighting coefficients for arrays of sensors or for finite-impulse-response (FIR) digital filters. The beam pattern of the array or the frequency response of the digital filter is a weighted, least mean-square (LMS) approximation to a desired function, subject to constrained pattern values at specified points. The method is applied to the problem of producing beam patterns of a line array for the rejection of interfering point sources. For this case, we show that adaptive array processing can be based on modification of the roots of the array polynomial.     

基于CRCB方法的多波束形成

针对国际上提出的相干稳健Capon波束形成(coherent robust capon beamforming．CRCB)方法，首先详细推导了其有用信号导向矢量的估计公式，并将CRCB方法应用到“多信号源多相干干扰源”情况下进行多波束形成，实验结果证明了其可行性。     

基于CATIA/CAA的四轴自动钻铆定位系统干涉检测编程方法研究及应用

干涉检测是自动钻铆加工前的重要准备工作,全文分别通过几种不同的干涉检测方法实现了运动仿真中的干涉检测,通过对各自方法取得的实际效果进行对比分析,得出通过基于CAAC++的方式调用CATIA自有的干涉检测功能不仅运算速度快、干涉检查信息全,并且程序运行稳定,效果最好,同时应用于开发的四轴数控托架仿真系统,辅助自动钻铆机生产加工,具有较广泛的应用前景。     

Radar detection and preclassification based on multiple hypothesis

This work presents a single-scan-processing approach to the problem of detecting and preclassifying a radar target that may belong to different target classes. The proposed method is based on a hybrid of the maximum a posteriori (MAP) and Neyman-Pearson (NP) criteria and guarantees the desired constant false alarm rate (CFAR) behavior. The targets are modeled as subspace random signals having zero mean and given covariance matrix. Different target classes are discriminated based on their different signal subspaces, which are specified by their corresponding projection matrices. Performance is investigated by means of numerical analysis and Monte Carlo simulation in terms of probability of false alarm, detection and classification; the extra signal-to-noise power ratio (SNR) necessary to classify once target detection has occurred is also derived.     

A method for satellite time series anomaly detection based on fast-DTW and improved-KNN

In satellite anomaly detection, there are some problems such as unbalanced sample distribution, fewer fault samples, and unobvious anomaly characteristics. These problems cause the extisted anomaly detection methods are difficult to train accurate classification model, and the accuracy of anomaly detection is hard to improve. At the same time, the monitoring data of satellite has high dimension and is difficult to extract effective features. Based on the DTW over-sampling method, this paper realizes the over-sampling of fault samples in satellite time series, and constructs a distributed and balanced time series data set. The Fast-DTW method is applied to calculate the distance between different time series, which can improve the speed of similarity calculation. KNN (K-Nearest Neighbor) method is applied for classification and the best classification result is obtained by search the optimal hyper-parameters k. The results show that the proposed method has high anomaly detection accuracy and consumes short calculation time.     

航天器进入制导方法综述

航天器制导系统的设计至关重要,直接关乎航天器能否安全返回地球或着陆行星表面指定区域。在给出航天器进入动力学模型的基础上,首先分析了进入制导问题建立及难点,然后综述了航天器进入制导方法的研究现状,分析了各类进入制导方法的优缺点。作为统一或通用方法,介绍了实际应用于中国航天工程再入返回的自适应预测校正制导方法。面向未来发展亟待解决的问题,在线快速规划可行轨迹的重要性凸显,分析了在线轨迹规划方法所需要解决的问题以及今后进入制导方法的发展方向。     

相位检测误差对核磁共振陀螺输出频率的影响

针对核磁共振陀螺中采用相位检测方案时可能引起额外频率误差的问题,提出了通过控制电子顺磁共振失谐量及静磁场扰动来抑制额外频率误差的方案。基于Bloch方程,推导了惰性气体原子系综输出频率的表达式,并将相位检测的过程包含在内。建立了考虑相位检测误差的核磁共振陀螺频率误差方程,给出了相位检测引入的额外频率误差表达式并进行了数值仿真。仿真结果表明,通过设定合适的共振失谐量,其额外频率误差至少可以抑制1个数量级,而通过精确地抑制静磁场的一阶及二阶扰动,可以进一步抑制1～3个数量级,将额外频率误差降低到nHz量级。     

视频序列中的人脸检测算法

根据视频序列的特性,首先采用背景差分法提取视频中的运动区域,之后对检测的运动区域采用对数扩展的方式调整光照的影响。采用基于YCbCr颜色空间的肤色模型进行检测得到人脸候选区域,并采用一定的阈值去除小的非人脸的区域,再通过在人脸候选区域检测眼睛位置,利用人脸几何特征精确定位人脸。实验表明,该方法提高了检测速度,降低了误检率,可以应用在视频监控等实时系统中。     

JIDS/SINS/GPS组合导航系统两级故障检测结构设计

针对传统组合导航系统故障检测方法不能同时准确检测突变故障及缓变故障的不足,提出了一种两级故障检测结构。这种结构采用联邦滤波器结合了残差χ2检测法易于检测突变故障和状态χ2检测法易于检测缓变故障的优势,在JIDS/SINS/GPS组合导航系统中得到了成功应用。仿真表明,这种方法对突变故障和缓变故障都达到了较好的检测效果。此外,此方法没有改变联邦滤波器原有结构,检测准确度高,计算量小,是一种便于工程实现的检测方法。     

应用声发射检测复合材料桨叶疲劳损伤的技术研究

随着材料技术的发展，复合材料在直升机上运用越来越广泛。由于复合材料的损伤模式与金属材料有很大的区别，因此，了解复合材料破坏判据对复合材料零部件的定寿具有决定性的作用。本文介绍了声发射技术的基本理论、应用现状和声发射技术在复合材料桨叶疲劳试验中的应用研究。     

Evaluating Radar Detection Probabilities by Steepest Descent Integration

The probability of detection for radars employing noncoherent integration and a fixed threshold or cell-averaging constant false alarm rate (CA-CFAR) processor is computed by numerical contour integration in the complex plane. The technique is applied to both nonfluctuating and chi-squared fluctuating targets. A bound on the truncation error allows for a simple stopping rule for the numerical integration. The method has applicability to many problems in radar detection theory.