共查询到20条相似文献,搜索用时 46 毫秒
1.
高性能DSP芯片TMS320F2812应用技术研究 总被引:1,自引:0,他引:1
TMS320F2812是TI公司推出的高性能32位定点信号处理器,它具有高度集成、高速、低功耗、易于开发等优点,特别适用于高性能数字控制和通讯等领域.主要介绍了TMS320F2812硬件结构、功能特点及其在电机控制系统中的应用. 相似文献
2.
本文以由SED1335驱动的点阵液晶显示模块为例,提出了一种基于TMS320LF2812DSP控制的图文显示的实用设计方案,包括硬件部分和软件部分的设计,同时论述了在存储器资源配置的基础上充分利用TMS320LF2812内部存储器进行片上大容量图文字库设计的方法。 相似文献
3.
介绍一种采用DSP(TMS320F2812),IDE接口的电子盘和具有I^2C总线接口的计时器来实现实时数据记录功能的模块设计方案。该设计直接以扇区的物理地址对电子盘扇区进行读写操作。 相似文献
4.
5.
针对某型发动机电子控制器,对航空发动机分布式控制系统进行了初步研究。设计了1种基于分布式控制,用AD598、TMS320F2812 DSP和CAN总线构成的航空发动机智能导叶控制装置。阐述了智能导叶控制装置的壳体设计方法,以及TMS320F2812最小系统、基于AD598的LVDT(线性可变差动变压器)信号调理电路、电液伺服阀电流驱动电路(电流输出电路)、CAN总线接口电路和D/A转换模块等电路的设计方法,简述了软件系统设计。通过完成半物理试验,基本满足了对风扇进口可调叶片角度α1、高压压气机进口可调静子叶片角度α2的控制要求。结果表明:该装置具备体积小、智能化程度高、控制效果好等特点。 相似文献
6.
7.
基于TMS320F2812和μC/OS-Ⅱ的飞机电气测控终端设计 总被引:1,自引:0,他引:1
介绍了基于新型高性能DSP芯片TMS320F2812和嵌入式操作系统μC/OS-Ⅱ的飞机电气测控终端的设计与实现,该终端已被用于先进飞机配电系统的地面实验系统中。 相似文献
8.
TMS320F2812芯片的FLASH烧写技术 总被引:2,自引:0,他引:2
介绍了数字信号处理器TMS320F2812芯片内部闪存(FLASH)的两种技术: CCS插件烧写技术和Flash281x_API库烧写技术.提出了一种利用算法、摆脱JTAG口,使用RS422传输方式进行FLASH程序烧写的方法.由于RS422具有抑制共模干扰的能力,通讯距离往往能够达到几千米,所以这种方法非常适用于机载、弹载设备的外场加载和远程控制,具有较大的实用价值. 相似文献
9.
对卫星天线稳定跟踪系统的工作原理进行了分析,设计了一种基于DSP TMS320F2812的天线稳定控制器,详细分析了系统的原理、构成、设计方法,概要介绍了DSP芯片的特点及其电路设计和系统软件的设计及其模块划分和功能,在matlab上对系统进行了仿真实验,得到了良好的仿真效果。 相似文献
10.
针对变频技术的核心—SPWM波形的产生和控制,详细介绍了SPWM波形的产生方法,并给出了软件编程。通过以DSP芯片TMS320F2812为核心,利用规则采样法产生SPWM波形,具有速度快,精度高,实时控制能力强,易于频率变换等优点。 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:3,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
14.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
15.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
16.
17.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
18.
Abnormal Shape Mould Winding 总被引:1,自引:0,他引:1
Fu Hongya Wang Xianfeng Han Zhenyu Fu Yunzhong 《中国航空学报》2007,20(6):552-558
为解决网格化芯模的缠绕问题,本文提出了复合材料面片缠绕机理;接着详细分析了面片缠绕过程中的芯模凹曲面上纤维滑线和架空现象,应用微分几何曲面理论和空间几何理论,提出判据及其解决方案;最后,针对飞机发动机进气道的缠绕成型,编制缠绕控制程序并进行相应的实验,验证了面片缠绕方法的可行性。 相似文献
19.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
20.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献