共查询到20条相似文献,搜索用时 375 毫秒
1.
2.
详细分析了CAPP技术的应用现状,对二维工艺设计、三维工艺设计各自的优缺点进行分析,提出了将三维数据信息融入到传统二维工艺文件中,建立支持三维数据的CAPP集成系统,并对系统的体系架构,工艺设计流程及现场可视化作了详细的分析,并在企业中得到了有效性的实际应用。 相似文献
3.
4.
居建国%李文晓%薛元德%黄维悦 《宇航材料工艺》2007,37(4):58-60
对两端收口复合绝热管进行了工艺方案分析,确定气囊成型工艺为优选工艺方案,在此基础上阐述了气囊成型工艺设计的原则,依据这个原则开展了典型样件的研制.结果表明:方案选择合理,工艺设计完整、可靠,产品满足各项指标要求. 相似文献
5.
结合对某航空制造企业工艺设计业务流程的分析,以CAPPFramework与Teamcenter集成开发为基础,建立了由数据层、协同平台层、应用层构成的协同工艺设计与管理系统(C-CAPP)架构,详细论述了主制工艺与协作工序/扩编工艺的编制协同,主制工艺编制与专用工装申请/设计的协同,主制工艺与数控加工工序的编制协同,工艺设计数据管理方式。并以XML为工具进行了C-CAPP系统功能调用和数据通信形式化描述。 相似文献
6.
7.
8.
9.
10.
针对自动化对接技术特点,全面分析了飞机自动化对接工艺过程,阐述了目前采用自动化对接技术存在的产品和工艺设计主要问题,提出了面向自动化对接的飞机产品设计一般要求,分析了自动化对接技术实施过程中装配工艺设计的重要性。针对设计和工艺存在的问题,从产品结构设计改进、装配协调方案设计、装配流程规划、部件调姿定位接头布局设计以及测量工艺规划等方面进行了论述,明确了具体的研究内容,提出了采用自动化对接技术相应的要点和解决方法。 相似文献
11.
12.
基于三维通用单胞方法的平纹编织复合材料多尺度损伤模拟方法 总被引:2,自引:2,他引:0
为了解决编织复合材料多尺度损伤模拟的技术难题,发展了基于三维通用单胞模型(GMC)的多尺度损伤模拟方法。基于通用单胞方法基本理论,推导宏细观参量的转换公式,设计了宏细观损伤增量步迭代流程。以二维平纹编织陶瓷基复合材料为例,开展了结构单胞的细观损伤模拟,以及其平板试验件的多尺度损伤模拟,得到了细观损伤云图和宏观应力应变曲线。研究表明:该方法模拟的结构单胞细观损伤过程与文献描述的损伤机理相符,预测的平板试验件损伤过程的应力应变曲线与试验结果基本吻合,所预测强度值的相对误差小于5%。 相似文献
13.
《中国航空学报》2023,36(4):286-298
The incursion of Unmanned Aerial Vehicles (UAVs) into airports often occurs due to the popularity of drones, which may lead to a threat to aircraft flight safety. Therefore, estimating the dynamic impact load caused by drone strikes is essential. This paper proposes a test method with high precision and low cost involving launching of a UAV to impact a flat plate specimen by using an air gun. The test results of UAVs impacting flat plates at different impact velocities, such as the UAV damage deformation captured by a high-speed camera and strain vs time dynamic response curves of plates, were obtained and analysed. At the same time, a corresponding numerical simulation was carried out by using the explicit finite element software LS-DYNA. The predicted damage to the UAV and strain on the flat plate during the strike process were compared with the test results. The overall trend of the simulation results is in good agreement with the test results, at least for the first three milliseconds of the event. This shows that the numerical simulation model established in this paper is reasonable. The UAV numerical method established in the present paper can be used to carry out numerical simulations and evaluations of the collision safety of UAVs against large aircraft and high-value ground targets. The results show that the local deformation of the impacted target is uneven due to the distribution of concentrated mass components such as motors, battery, and camera. As the impact velocity of the UAV increases, all parts of the UAV are seriously damaged and basically in a fragmented state, and the battery is greatly deformed. The interaction between the UAV and the flat plate specimen is approximately 2.7 ms, and the UAV numerical simulation model established in this paper can well simulate the real UAV impact process. 相似文献
14.
15.
Study on Titanium Alloy TC4 Ballistic Penetration Resistance Part I:Ballistic Impact Tests 总被引:2,自引:2,他引:0
Ballistic impact test of different-scale casings is an efficient way to demonstrate the casing containment capability at the preliminary design stage of the engine. For the sake of studying the titanium alloy TC4 casing performance, the ballistic tests of flat and curved simulation casing are implemented by using two flat blades of different sizes as the projectile. The impact mechanism and failure of the target are discussed. Impact of the projectile is a highly nonlinear transient process with the large deformation of the target. On the impact, failures of the flat casing and the subscale casing are similar, concluding two parts, the global dishing and localized ductile tearing. The main localized failure mode combines plugging (shear) and petaling (shear) if the projectile perforates or penetrates, while crater (shear) if the projectile rebounds. The ballistic limit equation is verified by the test data and the results show that this empirical equation could be a practical way to estimate the critical velocity. 相似文献
16.
X-cor增强泡沫夹层结构力学性能试验 总被引:4,自引:0,他引:4
研究了碳纤维X-cor销钉增强泡沫夹层结构的常规力学性能。自行设计工艺,制造了X-cor增强泡沫夹层结构复合材料,并进行了多种材料/几何参数下的平压、三点弯曲和芯子剪切试验,得到了系列试验数据,并观察记录了较全面的结构破坏模式;倾斜的X-cor销钉对夹层结构性能的增强效果大大优于垂直销钉的增强效果,倾斜X-cor增强泡沫夹层结构的抗弯刚度和破坏载荷大幅提高;X-cor增强泡沫夹层结构在弯曲载荷下具有较强的二次承载能力;X-cor增强泡沫夹层结构在弯曲和剪切载荷下均呈现明显的渐进失效过程,在初始裂纹出现后,直到最终破坏发生还有较长的损伤扩展过程,这一过程是增强相限制芯材裂纹大规模扩展的结果,表明X-cor增强泡沫夹层结构在初始裂纹出现后还具有较强的持续承载能力。 相似文献
17.
在落震试验中起转和回弹载荷的模拟情况对试验结果的影响 总被引:3,自引:1,他引:2
起转和回弹载荷的模拟是影响起落架落震试验结果的重要因素。通过在立柱式落震试验台上进行不同模拟跑道的起落架带转落震试验,得到了某些典型起转和回弹载荷模拟情况下的落震试验结果。通过对这些落震试验结果进行分析和讨论,得出了在立柱式落震试验台上进行落震试验时合理的起转和回弹载荷的模拟方式。研究结果表明 :在立柱式落震试验台上进行起落架落震试验时,使用合理的起转和回弹载荷的模拟方式,可以将机轮与模拟跑道之间定点摩擦对试验结果的影响减到最小。 相似文献
18.
19.