JTIDS relative navigation and data registration

The Joint Tactical Information Distribution System (JTIDS), an integrated communication, navigation, and identification system, provides a solution to the critical data registration problem facing the joint US military services today, namely, the establishment, in real-time, of accurately correlated positions and tracks for all friendly, unknown, and hostile targets in an operational area, thus providing the total situation awareness required for tactical and C² operations. The fundamental relationships of JTIDS navigation and the error analysis for target registration and target hand-off in both geodetic and relative grid coordinates are presented. Simulation results are provided for two scenarios to demonstrate the level of improvement that JTIDS navigation can have on situation awareness, target acquisition, and weapon delivery. Specifically, it is shown that accurate data registration can be achieved by as few as two JTIDS members, with or without accurate knowledge of geodetic position     

IMMPDAF for radar management and tracking benchmark with ECM

A framework is presented for controlling a phased array radar for tracking highly maneuvering targets in the presence of false alarms (FAs) and electronic countermeasures (ECMs). Algorithms are presented for track formation and maintenance; adaptive selection of target revisit interval, waveform and detection threshold; and neutralizing techniques for ECM, namely, against a standoff jammer (SOJ) and range gate pull off (RGPO). The interacting multiple model (IMM) estimator in combination with the probabilistic data association (PDA) technique is used for tracking. A constant false alarm rate (CFAR) approach is used to adaptively select the detection threshold and radar waveform, countering the effect of jammer-induced false measurements. The revisit interval is selected adaptively, based on the predicted angular innovation standard deviations. This tracker/radar-resource-allocator provides a complete solution to the benchmark problem for target tracking and radar control. Simulation results show an average sampling interval of about 2.5 s while maintaining a track loss less than the maximum allowed 4%     

Precision large scale air traffic surveillance using IMM/assignmentestimators

We present the development and implementation of a multisensor-multitarget tracking algorithm for large scale air traffic surveillance based on interacting multiple model (IMM) state estimation combined with a 2-dimensional assignment for data association. The algorithm can be used to track a large number of targets from measurements obtained with a large number of radars. The use of the algorithm is illustrated on measurements obtained from 5 FAA radars, which are asynchronous, heterogeneous, and geographically distributed over a large area. Both secondary radar data (beacon returns from cooperative targets) as well as primary radar data (skin returns from noncooperative targets) are used. The target IDs from the beacon returns are not used in the data association. The surveillance region includes about 800 targets that exhibit different types of motion. The performance of an IMM estimator with linear motion models is compared with that of the Kalman filter (KF). A number of performance measures that can be used on real data without knowledge of the ground truth are presented for this purpose. It is shown that the IMM estimator performs better than the KF. The advantage of fusing multisensor data is quantified. It is also shown that the computational requirements in the multisensor case are lower than in single sensor case, Finally, an IMM estimator with a nonlinear motion model (coordinated turn) is shown to further improve the performance during the maneuvering periods over the IMM with linear models     

基于傅里叶变换的航迹对准关联算法

研究了在组网雷达存在系统误差情况下的目标航迹关联问题,理论分析了雷达系统误差对目标航迹的影响,并将该影响表示为目标航迹的旋转和平移量。在此基础上,提出了一种基于傅里叶变换的系统误差配准前航迹对准关联算法,该算法将组网雷达的航迹数据看做为一种整体信息,采用傅里叶变换理论来估计和补偿组网雷达目标航迹数据到融合中心航迹数据的相对旋转量和平移量,将雷达网中雷达上报的目标航迹数据对准到融合中心,从而不依赖于估计雷达网系统误差,实现了误差配准前的航迹准确关联,能够为后端的系统误差配准提供可靠的关联目标航迹数据。     

Analysis of interference effects on monopulse radars

The complete numerical analysis of angle-tracking performance of a coherent amplitude-comparison monopulse radar system in a two-target situation is described. This system, equipped with automatic gain control (AGC) and phase-locked loop (PLL), was originally invented for improving the target-tracking performance in multiple-target situation. The general behavior depends on Doppler separation of the targets relative to the bandwidths of AGC and PLL. The performance of this system has previously been roughly analyzed by using linear approximation for four extreme cases: wideband and narrowband AGC in combination with wideband and narrowband PLL. In this study, the author performs nonlinear analysis of the same system for all bandwidths of AGC and PLL, because Doppler separation varies over a wide range in actual tracker, and therefore it is indispensable to know the total system behavior. A special numerical technique called the Galerkin method is used. As a result of this analysis, the extensive target-tracking performance for all intermediate bandwidths of AGC and PLL has been clarified. The result is useful for actual target tracker design     

Data fusion for ground moving target tracking

The aim of ground surveillance is the large scale, continuous and near real time determination of a dynamical ground picture. This task comprises detection and tracking of moving single targets and convoys, mobile weapon systems, and military equipment. The sensors of choice are airborne Ground Moving Target Indicator (GMTI) radar and synthetic aperture radar (SAR). As ground target tracking often suffers from dense target situations, high clutter, and low visibility, the integration and fusion of external background information is essential for providing precise and continuous tracks. We present Multi Hypotheses techniques for tracking several targets in complex ground situations with clutter. Methods to incorporate topographic information, in particular digital road maps, are described and demonstrated.     

Multiple model PMHT and its application to the benchmark radar tracking problem

The probabilistic multiple hypothesis tracker (PMHT) uses the expectation-maximization (EM) algorithm to solve the measurement-origin uncertainty problem. Here, we explore some of its variants for maneuvering targets and in particular discuss the multiple model PMHT. We apply this PMHT to the six "typical" tracking scenarios given in the second benchmark problem from W. D. Blair and G. A. Watson (1998). The manner in which the PMHT is used to track the targets and to manage radar allocation is discussed, and the results compared with those of the interacting multiple model probabilistic data association filter (IMM/PDAF) and IMM/MHT (multiple hypothesis tracker). The PMHT works well: its performance lies between those of the IMM/PDAF and IMM/MHT both in terms of tracking performance and computational load.     

Target Identification by Natural Resonance Estimation

This paper presents a target identification method based on an estimation of the natural frequencies of oscillation in transient radar signatures. The emphasis is placed upon signal modeling and estimation ation strategy rather than relating resonance locations to physical structures. Salient features of this identification method are: 1) target aspect angle is not needed, 2) multiple targets of the same type can be illuminated simultaneously, and 3) bandpass interrogation ion pulses can be used. The latter feature is compatible with existing radar facilities. The method is applied to some simulated transfer functions, and factors affecting estimate accuracy are discussed.     

An Adaptive Two-Dimensional Kalman Tracking Filter

A continuously adaptive two-dimensional Kalman tracking filter for a low data rate track-while-scan (TWS) operation is introduced which enhances the tracking of maneuvering targets. The track residuals in each coordinate, which are a measure of track quality, are sensed, normalized to unity variance, and then filtered in a single-pole filter. The magnitude Z of the output of this single-pole filter, when it exceeds a threshold Z1 is used to vary the maneuver noise spectral density q in the Kalman filter model in a continuous manner. This has the effect of increasing the tracking filter gains and containing the bias developed by the tracker due to the maneuvering target. The probability of maintaining track, with reasonably sized target gates, is thus increased, The operational characteristic of q versus Z assures that the tracker gains do not change unless there is high confidence that a maneuver is in progress.     

Radar technology in the Czech Republic

A contemporary status of radar technology in the Czech Republic is reviewed in this paper. We may find activity in many different directions in this field now. Those are: new primary radar development both for military and civil application, primary and secondary radar upgrades, new passive radar development for civil application, ELINT and ESM equipment, intruding alarm radar sensors for commercial application/high mass production, radar warning and seeking receivers and military targets RCS minimization.     

Positive identification of aircraft on airport movementarea-results of FAA trials

Current operational airport surface surveillance systems do not positively identify aircraft as unique targets. Air traffic controllers are instead presented with a primary radar picture showing all traffic on the airport movement area. The Federal Aviation Administration (FAA) is evaluating different types of systems that will add the aircraft's call-sign or flight number to the radar image thereby allowing controllers to positively identify individual aircraft at all times. This paper describes the development, implementation, and testing of the airport surface target identification system (ATIDS), and presents results of initial trials conducted at Atlanta Hartsfield International Airport     

Track labeling and PHD filter for multitarget tracking

Multiple target tracking requires data association that operates in conjunction with filtering. When multiple targets are closely spaced, the conventional approaches (as, e.g., MHT/assignment) may not give satisfactory results. This is mainly because of the difficulty in deciding what the number of targets is. Recently, the probability hypothesis density (PHD) filter has been proposed and particle filtering techniques have been developed to implement the PHD filter. In the particle PHD filter, the track labeling problem is not considered, i.e., the PHD is obtained only for a frame at a time, and it is very difficult to perform the multipeak extraction, particularly in high clutter environments. A track labeling method combined with the PHD approach, as well as considering the finite resolution, is proposed here for multitarget tracking, i.e., we keep a separate tracker for each target, use the PHD in the resolution cell to get the estimated number and locations of the targets at each time step, and then perform the track labeling ("peak-to-track" association), whose results can provide information for PHD peak extraction at the next time step. Besides, by keeping a separate tracker for each target, our approach provides more information than the standard particle PHD filter. For example, in group target tracking, if we are interested in the motion of a specific target, we can track this target, which is not possible for the standard particle PHD filter, since the standard particle PHD filter does not keep track labels. Using our approach, multitarget tracking can be performed with automatic track initiation, maintenance, spawning, merging, and termination     

Knowledge-based system for multi-target tracking in a littoral environment

The paper addresses how to efficiently exploit the knowledge-base (KB), e.g. environmental maps and characteristics of the targets, in order to gain improved performance in the tracking of multiple targets via measurements provided by a ship-borne radar operating in a littoral environment. In this scenario, the nonhomogeneity of the surveillance region makes the conventional tracking systems (not using the KB) very sensitive to false alarms and/or missed detections. It is demonstrated that an effective use of the KB can be exploited at various levels of the tracking algorithms so as to significantly reduce the number of false alarms, missed detections, and false tracks and improve true target track life. The KB is exploited at two different levels. First, some key parameters of the tracking system are made dependent upon the track location, e.g., sea, land, coast, meteo zones (i.e., zones affected by meteorological phenomena) etc. Second, modifications are introduced to cope with a priori identified regions nit hi high clutter density (e.g. littoral areas, roads, meteo zones etc.). To evaluate the behavior of the proposed knowledge-based tracking systems, extensive results are presented using both simulated and real radar data     

Radar target classification using doppler signatures of human locomotion models

The problem of target classification for ground surveillance Doppler radars is addressed. Two sources of knowledge are presented and incorporated within the classification algorithms: 1) statistical knowledge on radar target echo features, and 2) physical knowledge, represented via the locomotion models for different targets. The statistical knowledge is represented by distribution models whose parameters are estimated using a collected database. The physical knowledge is represented by target locomotion and radar measurements models. Various concepts to incorporate these sources of knowledge are presented. These concepts are tested using real data of radar echo records, which include three target classes: one person, two persons and vehicle. A combined approach, which implements both statistical and physical prior knowledge provides the best classification performance, and it achieves a classification rate of 99% in the three-class problem in high signal-to-noise conditions.     

基于空间多特征综合推理的航迹航路关联

针对航迹分类问题,研究了基于空间多特征的综合推理在航路判读中的应用。首先根据空管系统对航路以及飞机飞行的要求,对航迹航路相关问题进行建模。然后根据已知的传感器系统输出的目标特性(位置,航向)与已知的多个航路信息分别进行相关度计算,构造基本信任函数,通过对其融合,得到目标单特征识别结果。其中,通过合理地引入复合类,实现了对目标类别的广义信任分类。建立了多特征折扣融合算法,对多特征基本信任函数进行折扣后再融合,得到目标多特征识别结果。仿真结果以及空管实际数据测试表明:该算法不仅可以实现航迹分类,同时可以有效地降低分类的错误率。     

Improved target classification using optimum polarimetric SARsignatures

We present a new method for automatic target/object classification by using the optimum polarimetric radar signatures of the targets/objects of interest. The state-of-the-art in radar target recognition is based mostly either on the use of single polarimetric pairs or on the four preset pairs of orthogonal polarimetric signatures. Due to these limitations, polarimetric radar processing has been fruitful only in the area of noise suppression and target detection. The use of target separability criteria for the optimal selection of radar signal state of polarizations is addressed here. The polarization scattering matrix is used for the derivation of target signatures at arbitrary transmit and receive polarization states (arbitrary polarization inclination angles and ellipticity angles). Then, an optimization criterion that minimizes the within-class distance and maximizes the between-class metrics is used for the derivation of optimum sets of polarimetric states. The results of the application of this approach on real synthetic aperture radar (SAR) data of military vehicles are obtained. The results show that noticeable improvements in target separability and consequently target classification can be achieved by the use of the optimum over nonoptimum signatures     

An Algorithm for Tracking a Maneuvering Target in Clutter

We consider the problem of tracking a maneuvering target in clutter. In such an environment, missed detections and false alarms make it impossible to decide, with certainty, the origin of received echoes. Processing radar returns in cluttered environments consists of three functions: 1) target detection and plot formation, 2) plot-to-track association, and 3) track updating. Two inadequacies of the present approaches are 1) Optimization of detection characteristics have not been considered and 2) features that can be used in the plot-to-track correlation process are restricted to a specific class. This paper presents a new approach to overcome these limitations. This approach facilitates tracking of a maneuvering target in clutter and improves tracking performance for weak targets.     

Target detection and tracking with HF radar using reciprocal SARtechniques

Sustained research and development at Memorial University of Newfoundland has led to an operational High Frequency Ground Wave Radar (HF-GWR) system for coastal surveillance. This radar system has demonstrated over-the-horizon detection of targets such as vessels, ice hazards and low-flying aircraft, and performed ocean parameter measurements over a large area. The industrial developers of offshore hydrocarbon reserves in ice infested regions have an urgent requirement for the long range detection and tracking of icebergs from their production platforms. However, due to space restrictions, a rig- or ship-based system can only accommodate a compact antenna array. The uniform trajectory and low velocity of icebergs is ideal for Reciprocal Synthetic Aperture Radar (RSAR) processing with long target dwell times. The proven ice detection capability of HF-GWR systems, coupled with the compact antennas suggested by the RSAR technique, can be used to develop a rig- or ship-based all-weather surveillance device for ice hazards. It is also anticipated that the results of this research will allow the use of shorter antenna arrays for many other applications. Preliminary results using real data from the operational HF-GWR system are presented     

GMTI along-track interferometry experiment

Synthetic aperture radar (SAR) along track interferometry (ATI) has been used extensively to measure ocean surface currents. Given its ability to measure small velocities (/spl sim/ 10 cm/s) of relatively radar-dark water surfaces, there is great potential that this technique can be adapted for ground moving target indication (GMTI) applications, particularly as a method for detecting very slow targets with small radar cross-sections. In this paper we describe preliminary results from an ATI GMTI experiment. The SAR data described herein were collected by the dual-frequency NASA/JPL airborne radar in its standard dual-baseline ATI mode. The radar system imaged a variety of control targets including a pickup truck, sport utility vehicles, passenger cars, a bicycle, and pedestrians over multiple flight passes. The control targets had horizontal velocities of less than 5 m/s. The cross-sections of the targets were not purposely enhanced, although the targets' reflectivities may have been affected by the existence of the GPS equipment used to record the targets' positions. Single-look and multiple-look interferograms processed to the full azimuth resolution were analyzed. In the data processed to date, all of the targets were observed by visual inspection in at least one of the four combinations of dual-frequency, dual-baseline interferometric data. This extremely promising result demonstrates the potential of ATI for GMTI applications.