首页 | 本学科首页   官方微博 | 高级检索  
     

基于舵面配平的飞机续航飞行航迹优化方法
引用本文:刘帆,王立新,蔡为民. 基于舵面配平的飞机续航飞行航迹优化方法[J]. 北京航空航天大学学报, 2016, 42(1): 79-86. DOI: 10.13700/j.bh.1001-5965.2015.0067
作者姓名:刘帆  王立新  蔡为民
作者单位:1.北京航空航天大学航空科学与工程学院, 北京 100083
摘    要:舵面偏转除了能够提供保证飞机稳定飞行的配平力矩,还将改变飞机的升阻比,从而影响其续航性能。在基于飞机质点假设的传统航迹优化方法的基础上,研究了飞机的升阻特性对其续航性能的影响:在上升段、巡航段及下降段前期增大升阻比,在下降段后期减小升阻比,有利于提高飞机的续航性能;提出了基于舵面配平的续航飞行航迹优化方法,以获得更接近于发挥飞机实际潜力的最优航迹与最大航程。对于多操纵面布局飞机,通过该方法能够确定其最优舵面组合配平规律。算例飞机的优化结果表明:相比单一舵面配平,最优舵面组合配平能够使算例飞机的总航程最大提高7.5%。 

关 键 词:航迹优化   续航性能   升阻比   舵面配平   总能量原理
收稿时间:2015-01-30

Trajectory optimization method of aircraft endurance flight based upon control surface trimming
LIU Fan,WANG Lixin,CAI Weimin. Trajectory optimization method of aircraft endurance flight based upon control surface trimming[J]. Journal of Beijing University of Aeronautics and Astronautics, 2016, 42(1): 79-86. DOI: 10.13700/j.bh.1001-5965.2015.0067
Authors:LIU Fan  WANG Lixin  CAI Weimin
Affiliation:1.School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China2. Shenyang Aircraft Design Institute of Aviation Industry Corporation of China, Shenyang 110035, China
Abstract:Besides providing balancing moment for stable flight, control surface deflection will change the lift-drag ratio of the airplane, which affects the endurance performance of the airplane. Based on the traditional flight trajectory optimization which assumes that the airplane is a particle, the effects of lift-drag characteristic on aircraft endurance performance are analyzed. Increasing lift-drag ratio at climb segment, cruise segment and earlier descent segment, and decreasing lift-drag ratio at later descent segment will improve the endurance performance of the airplane. In order to obtain the optimum flight trajectory and range closer to the actual potential of airplane, a trajectory optimization method of aircraft endurance flight based upon control surface trimming is proposed. Through this method, the optimum combined trimming mode of control surfaces can be obtained for multi-control surface airplane. The optimization result of a type of aircraft indicates that, compared to single trimming modes of control surface, the optimum combined trimming mode increases the total range by 7.5% at most for the example airplane.
Keywords:trajectory optimization  endurance performance  lift-drag ratio  control surface trimming  total energy theory
本文献已被 万方数据 等数据库收录!
点击此处可从《北京航空航天大学学报》浏览原始摘要信息
点击此处可从《北京航空航天大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号