|
|||||
|
|
| 缓冲气囊展开与缓冲着陆过程的仿真分析 | |
| 引用本文： | 卫剑征,谭惠丰,万志敏,戈嗣诚.缓冲气囊展开与缓冲着陆过程的仿真分析[J].航天返回与遥感,2010,31(5):1-8. |
| 作者姓名： | 卫剑征 谭惠丰 万志敏 戈嗣诚 |
| 作者单位： | 1. 哈尔滨工业大学,复合材料与结构研究所,哈尔滨,150080 2. 哈尔滨工业大学,分析测试中心,哈尔滨,150001 3. 北京空间机电研究所,北京,100076 |
| 基金项目： | 国家863计划资助项目 |
| 摘 要： | 文章基于显式有限元模型,采用控制体积法对缓冲气囊的展开及缓冲过程进行仿真分析。首先对单个球形气囊进行折叠展开过程模拟,之后依据NASA"猎户座"缓冲着陆器的缩比模型,建立了一个用以评估气囊着陆衰减系统的LS-DYNA有限元模型。分别研究了缓冲着陆器正碰和侧碰对缓冲气囊压力、着陆器的加速度和运动的影响。并与文献进行对比验证,计算结果表明数值模拟的正确性。 |
| 关 键 词： | 缓冲着陆 气囊 充气展开 控制体积法 航天器 |
Simulation for Airbag Deployment and Landing Process of Inflatable Landing Vechiles |
|
| Wei Jianzheng,Tan Huifeng,Wan Zhimin,Ge Sicheng.Simulation for Airbag Deployment and Landing Process of Inflatable Landing Vechiles[J].Spacecraft Recovery & Remote Sensing,2010,31(5):1-8. | |
| Authors: | Wei Jianzheng Tan Huifeng Wan Zhimin Ge Sicheng |
| Institution: | 1 Center for Composite Materials ＆ Structures,Harbin Institute of Technology,Harbin 150080,China) (2 Center for Analysis ＆ Tests,Harbin Institute of Technology,Harbin 150001,China)(3 Beijing Institute of Space Mechanics ＆ Electricity,Beijing 100076,China) |
| Abstract: | Inflatable deployment and cushion process of a landing vehicle play a key role during inflation of landing airbags and impaction with the ground.Based on explicit finite element model in this paper,deployment and buffer process were simulated using the control volume method.Firstly,the inflatable process of a folded spherical balloon was simulated.And then,according to the scale model of NASA Orion Crew Vechicle,a LS-DYNA finite element model was established to assess the landing airbag attenuation system.The pressure inside airbags were studied,as well as the acceleration and motion of the landing vechicle,when this vechicle had a central or lateral collision with the groud respectively.Comparing with the literature,the numerical simulation results show the correctness. |
| Keywords: | Cushion landing Airbags Inflatable deployment Control volume Spacecraft |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |