首页 | 本学科首页   官方微博 | 高级检索  
     检索      

考虑进口非均匀的喷管设计及冷流条件下的性能研究
引用本文:莫建伟,徐惊雷,全志斌,俞凯凯.考虑进口非均匀的喷管设计及冷流条件下的性能研究[J].航空学报,2014,35(3):706-713.
作者姓名:莫建伟  徐惊雷  全志斌  俞凯凯
作者单位:南京航空航天大学 能源与动力学院, 江苏 南京 210016
基金项目:国家自然科学基金(90916023);中央高校基本科研业务费专项资金(CXZZ11_0223)~~
摘    要:超燃冲压发动机尾喷管与燃烧室直接相连,由于没有几何喉道和收缩段的整流作用,实际工作过程中尾喷管的进口气流是非均匀的,因而有必要研究非均匀进口条件下的尾喷管设计方法。以超燃冲压发动机尾喷管非均匀进口马赫数分布为条件,采用有旋特征线设计了超燃冲压发动机非对称尾喷管的等熵膨胀型线。利用数值模拟和试验相结合的方法研究了冷流条件下喷管的气动性能。结果表明,在相同的进口条件下,相对于假定进口马赫数均匀分布设计得到的喷管,考虑进口马赫数非均匀分布设计的喷管推力增加0.6%~2.0%,负升力降低可达82.0%,俯仰力矩增加8.6%~13.0%,这说明在喷管的设计过程中考虑进口参数分布的非均匀性是有必要的。

关 键 词:超燃冲压发动机  喷管设计  进口非均匀  气动性能  数值模拟  试验  
收稿时间:2013-05-17
修稿时间:2013-11-05

Design and Cold Flow Experiment of a Scramjet Nozzle Considering Nonuniform Entrance Flow Effects
MO Jianwei,XU Jinglei,QUAN Zhibin,YU Kaikai.Design and Cold Flow Experiment of a Scramjet Nozzle Considering Nonuniform Entrance Flow Effects[J].Acta Aeronautica et Astronautica Sinica,2014,35(3):706-713.
Authors:MO Jianwei  XU Jinglei  QUAN Zhibin  YU Kaikai
Institution:College of Energy & Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Abstract:A scramjet nozzle is directly connected to the combustor and there is no contraction section or throat, which makes the nozzle entrance flow nonuniform, it is therefore necessary to obtain the design method for a scramjet nozzle with nonuniform entrance flow. In this paper, a scramjet nozzle is designed using the rotational method of characteristics which takes into consideration the nonuniform entrance flow effects. Experimental and numerical studies are performed to investigate the aerodynamic performance of this scramjet nozzle in conditions of cold flow, and the comparison is made with the nozzle which is designed with a uniform entrance flow in the same condition. Results obtained from the comparison conclude that the performance improvement obtained from the nonuniform nozzle design is about 0.6%-2.0% for thrust, 82.0% for negative lift, and 8.6%-13.0% for pitch moment, which demonstrates it is highly necessary to take into consideration the nonuniform distribution of entrance flow parameters when designing a scramjet nozzle.
Keywords:scramjet  nozzle design  nonuniform entrance flow  aerodynamic performance  numerical simulation  experiment  
本文献已被 CNKI 等数据库收录!
点击此处可从《航空学报》浏览原始摘要信息
点击此处可从《航空学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号