| 喷丸处理构件疲劳寿命预测机理模型研究 |
| |
| 引用本文： | 徐丽,陈跃良,刘旭.喷丸处理构件疲劳寿命预测机理模型研究[J].飞机设计,2013(5):31-34. |
| |
| 作者姓名： | 徐丽 陈跃良 刘旭 |
| |
| 作者单位： | [1]海军航空工程学院研究生管理大队,山东烟台264001 [2]海军航空工程学院青岛校区,山东青岛266041 [3]海军飞行学院,辽宁葫芦岛125001 |
| |
| 基金项目： | 国家自然科学基金（50675221）;总装“十一五”预研课题（513270301） |
| |
| 摘 要： | 提出了一种新的机理模型，该模型以喷丸处理构件裂纹扩展分析为基础，说明喷丸处理对机械构件疲劳寿命预测的影响。在裂纹扩展过程中，引入了表征表面粗糙度影响的渐进应力强度因子，并用时变残余应力函数改变裂尖应力比。用试验数据验证机理模型的有效性，结果表明，试验数据和模型预测非常吻合。
|
| 关 键 词： | 喷丸硬化 疲劳寿命预测 残余应力松弛 裂纹扩展 表面粗糙度 |
Mechanism Modeling of Shot Peening Effect on Fatigue Life Prediction |
| |
| XU Li,CHEN Yue-liang,LIU Xu.Mechanism Modeling of Shot Peening Effect on Fatigue Life Prediction[J].Aircraft Design,2013(5):31-34. |
| |
| Authors: | XU Li CHEN Yue-liang LIU Xu |
| |
| Institution: | 1. Postgraduate Team of Naval Aeronautical Engineering Academy, Yantai 264001, China ) ( 2. Naval Aeronautical Engineering Academy, Qingdao Branch, Qingdao 266041, China ) ( 3. Naval Flying Academy, Huludao 125001, China ) |
| |
| Abstract: | A new mechanism modeling is proposed in this paper to explain the shot peening effect on fatigue life predictions of mechanical components. The proposed methodology is based on the crack growth analysis of shot peened specimens. An asymptotic stress intensity factor solution is used to include the surface roughness effect and a time varying residual stress function is used to change the crack tip stress ratio during the crack propagation. A wide range of experimental data is used to validate the proposed mechanism modeling. Very good agreement is observed between experimental data and model predictions. |
| |
| Keywords: | shot peening fatigue life prediction residual stress relaxation crack growth surface roughness |
| 本文献已被 维普 等数据库收录！ |
