首页 | 本学科首页   官方微博 | 高级检索  
     检索      

可压稀相两相流场的数值模拟
引用本文:曾卓雄,姜培正.可压稀相两相流场的数值模拟[J].推进技术,2002,23(2):154-157.
作者姓名:曾卓雄  姜培正
作者单位:1. 南昌航空工业学院机械系,江西南昌,330034
2. 西安交通大学化工机械系,陕西西安710049
摘    要:针对可压两相流动,在阻力系数中考虑了可压缩性及颗粒聚积所造成的影响,用TVD格式对沙层,平板及JPL喷管内的气固稀相两相流进行了数值模拟,所获结果和已有的实验数据及有关文献吻合很好,在JPL喷管中,随着质量分数的增加,由于气体和颗粒间的相互作用逐渐增强,气相的温度增大,马赫数减小,但压力变化很小,而随着颗粒直径的增加,气相轴线上的温度减小。

关 键 词:发动机喷管  流动分布  可压缩性  稀相两相流  数值模拟
文章编号:1001-0055(2002)02-0154-04
修稿时间:2001年5月21日

Numerical simulation compressible dilute two-phase flow
ZENG Zhuo,xiong and JIANG Pei,zheng.Numerical simulation compressible dilute two-phase flow[J].Journal of Propulsion Technology,2002,23(2):154-157.
Authors:ZENG Zhuo  xiong and JIANG Pei  zheng
Institution:ZENG Zhuo xiong 1,JIANG Pei zheng 2
Abstract:In compressible two phase flow, drag coefficient including the influence of compressibility and particle accumulation was accounted for. The computation uses TVD algorithm for both gas and particle, numerical computation of dilute gas particle two phase turbulent flow over sand bed, a flat plate and in JPL nozzle were performed. The calculations agree well with the experimental data. In JPL nozzle, with increasing loading ratio, the interaction becomes strong, the gas temperature is increased, and the Mach number is decreased, but the influence of the loading ratio on the pressure is very small. With increasing particle diameter, the gas axial temperature is decreased.
Keywords:Engine nozzle  Two  phase flow  Flow distribution  Numerical simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《推进技术》浏览原始摘要信息
点击此处可从《推进技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号