| 声发射监测钻头折断的实验研究 |
| |
| 引用本文： | 张春江,陈小明.声发射监测钻头折断的实验研究[J].航空学报,1992,13(4):196-202. |
| |
| 作者姓名： | 张春江 陈小明 |
| |
| 作者单位： | 西北工业大学1003教研室，北京航空工艺研究所 西安 710072，北京 100095 |
| |
| 摘 要： | 金属切削过程中会发出声讯号。用声发射技术监测刀具破损是一个很有潜力的新方法。本文研究了声发射技术在钻头折断在线监测中的应用。实验结果表明,所设计的实验监测系统能可靠地监测钻头的折断,并可提前预报直径大于1.5mm钻头的折断。
|
| 关 键 词： | 钻削 钻头破损 声发射 在线监测 |
AN EXPERIMENTAL STUDY ON IN-PROCESS MONITORING DRILL SNAP USING ACOUSTIC EMISSION SIGNALS |
| |
| Zhang CHun-jiang.AN EXPERIMENTAL STUDY ON IN-PROCESS MONITORING DRILL SNAP USING ACOUSTIC EMISSION SIGNALS[J].Acta Aeronautica et Astronautica Sinica,1992,13(4):196-202. |
| |
| Authors: | Zhang CHun-jiang |
| |
| Institution: | 1. Faculty 1003 of Northwestern Polytechnical University, Xi'an, 710072;2. Beijing Aeronautical Manufacturing Technology Research Institute, Beijing, 100095 |
| |
| Abstract: | An abundance of acoustic emission (AE) is emitted in metal cutting process. The utilization of AE signal analysis for in-process monitoring tool breakage is a newly developed technique of great potentialities. The application of AE technique to monitoring of twist drill snap has been studied in this paper. The results of experiments show that the monitoring system is reliably capable of detecting drill snap, and can be used to predict the snap of drills with diameter of 1.5mm and over. No misinformation of drill snap occurred, and not a warning of drill snap was ignored. |
| |
| Keywords: | drilling drill breakage acoustic emission in-process detection |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《航空学报》浏览原始摘要信息 |
| 点击此处可从《航空学报》下载免费的PDF全文 |
